Add BHDC Reader-HHD02

readers/BHDC_Reader-HHD02.txt

@@ -0,0 +1,53 @@
+ idVendor: 0x155B
+  iManufacturer: BHDC
+ idProduct: 0x8202
+  iProduct: Reader-HHD02
+ bcdDevice: 1.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ Can't get iInterface string: LIBUSB_ERROR_INVALID_PARAM
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 4.800 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   Got 1 clock frequencies but was expecting 256
+   Support 4000 kHz
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 412903 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   Support 10752 bps
+  dwMaxIFSD: 522
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000200B2
+   ....02 Automatic parameter configuration based on ATR data
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   02.... Short APDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

readers/supported_readers.txt

@@ -1020,6 +1020,9 @@
 # ATMEL
 0x03EB:0x6016:ATMEL VaultIC460
 
+# BHDC
+0x155B:0x8202:BHDC Reader-HHD02
+
 # Broadcom Corp
 0x0A5C:0x5800:Broadcom Corp 5880
 0x0A5C:0x5801:Broadcom Corp 5880