Add KAPELSE KAP-eCV

readers/KAPELSE_KAP-eCV.txt

@@ -0,0 +1,48 @@
+ idVendor: 0x2947
+  iManufacturer: KAPELSE
+ idProduct: 0x0112
+  iProduct: KAP-eCV
+ bcdDevice: 1.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: 00000034 KAP-eCV
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0001
+   T=0
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 4.800 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   wrong size for GET CLOCK FREQUENCIES: 1
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 344064 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   wrong size for GET_DATA_RATES: 1
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x00010230
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ..02.. NAD value other than 00 accepted (T=1)
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

readers/supported_readers.txt

@@ -622,6 +622,7 @@
 0x2947:0x0103:KAPELSE KAP-GO
 0x2947:0x0104:KAPELSE eS-KAP-Ad
 0x2947:0x0105:KAPELSE KAP-LINK2
+0x2947:0x0112:KAPELSE KAP-eCV
 
 # Kapelse
 0x2947:0x0111:Kapelse Ti-Kap