Skip to content

EN

Jump to bottom
Kramar1337 edited this page Jun 6, 2023 · 17 revisions

Genshi AHK Flex

Translate.google 👌

Detailed description of each script function

Settings are applied after clicking "Save"

================================

Binds Tab

The checkbox next to the function enables/disables it

To change the button, you need to enter the name of the desired key and click "Save", scan codes are supported. If everything is correct, the script will reload, if not, the button will be reset and highlighted in red

F1 - Map

First press - opens the map, minimizes the game

Press again - the game is minimized, the map is opened

By pressing a hot key, the script expands the window with the map and minimizes the window with the game; if there is no map, the script will launch the map from the default browser

  • Support for multi-monitor configuration (popupwindow mode)
  • In the "Settings" menu, select a map
  • In the configuration file "data\genConfig.ini" there is a parameter "BrauzerCheck" and "BrauzerPick" to select the desired browser to open the map
  • Names of windows that the script should focus on "data\GroupNameMap1337.txt"

F2 - Overlay

The first press - the game is minimized, pseudo overlay unfolds

Press again - the overlay collapses, the game unfolds

  • Left Right buttons switch pages
  • Arrows inside the overlay are clickable (right left)
  • The ESC button always collapses the overlay
  • On the first page, you can switch the macro

F3 - Auto Walk

The first press - the sticking of the "W" button, the character flies-swims-runs by itself, pressing again will cancel the sticking

F - Fast Loot

Hold "F" button: script spams "F" button and mouse wheel down

  • You can quickly move the camera away with fast loot

Z - Skip dialogs

Hold down the "Z" button: the script spams the mouse click to the area of the screen where the NPC's negative response is located.

Checkbox "Lock Skip NPS" changes the mode of operation:

The first press of "Z - Skip dialogs" the script skips dialogs until the dialogs are over, it is recommended to enable "FIX Macro + chat" in the settings.

Pressing "Z - Skip Dialogs" again will pause the execution.

The loop will also pause if:

Press "Esc"
Press "Z - Skip Dialogs"
Minimize the game
If "FIX Macro + chat" is enabled, the loop will stop itself at the right moment

X - Fishing

Double tapping "X" quickly will start the screen pixel search algorithm

Single click will stop the algorithm

We throw a fishing rod, catch a fish, and then the script itself clicks the mouse to the desired timing, at sunset-dawn, the colors of fishing and the colors of the environment can merge and the script will start to miss (turn away from the sunset?). In "data\genConfig.ini" there is a delay "OptimizationFis=1" for maximum speed, you can set "0" but it will greatly throttle the percentage (3%) or put "50" but it will work slower.

Space - Bhop

When "Space" is pressed, the script will spam "Space"

  • You can set the response delay, according to the standard ~ 100ms
  • Numpad 0 - Enable / disable banyhop, useful when sailing on a boat

V - MacroKey

Pressing or holding "V" runs the selected macro below

Numpad 1 - Auto Attack
Numpad 2 - Ningguang
Numpad 3 - Yoimiya N1RR Stand still(38 arrows)
Numpad 4 - Ganyu Venti Yoimiya Gorou Amber Fischl Aloy Tartaglia *Diona *Sara
Numpad 5 - MachineGun: Ganyu Venti Yoimiya Gorou
Numpad 6 - Legit archers if kicked from server
Numpad 7 - Tighnari 3 hit
Numpad 8 - Hu Tao N2CJ (slow)
Numpad 9 - Hu Tao H1CJ
NumpadAdd - Expeditions
NumpadSub - Kaeya seafarer
Alt + Numpad 0 - Hu Tao N2CJ (fast)
Alt + Numpad 1 - Klee N1CJ
Alt + Numpad 2 - Klee N2H1
Alt + Numpad 3 - Klee AutoAttack(Hold WASD + Macro Key)
Alt + Numpad 4 - Other macros (genConfig.ini)
Alt + Numpad 5 - Xiao SpamPlunge(13 Jump)
Alt + Numpad 6 - Xiao N1SpamPlunge(11 jumps)
Alt + Numpad 7 - Ganyu Hold
Alt + Numpad 8 - Hu Tao (Test)
Alt + Numpad 9 - Swimming (double click on, single click off)
Alt + NumpadAdd - Mona-Ayaka infinite swimming (double click on, single click off)
Alt + NumpadSub - Auto cocking (double click on, single click off)

NumpadAdd - Expeditions

Autocollection of expeditions. Configure the file "genConfig.ini", parameters "ExManualMode=1" and specify the camps. The order in the game is from left to right.

Alt + Numpad 4 - Other macros (genConfig.ini)

Removed macros, selection "Alt + Numpad4". Open the "genConfig.ini" configuration file and set the "OldMacroBackVar" parameter. Toggle macro: Up - Down arrows. The switch works if "OldMacroBackVar > 0"

0 - Off
1 - Witcher Sense (First click - on, second click - off)
2 - Klee combo
3 - Shooting at Amber at legit but need to be on the move +W
4 - Shooting at Fischl legit but need to be on the move + W
5 - BeidouDragonStrikeNoPlunge
6 - BeidouDragonStrikePlunge
7 - ChongyunDragonStrikeNoPlunge
8 - ChongyunDragonStrikePlunge
9 - EulaDragonStrikeNoPlunge
10 - EulaDragonStrikePlunge
11 - NoelleDragonStrikeNoPlunge
12 - NoelleDragonStrikePlunge
13 - RazorDragonStrikeNoPlunge
14 - RazorDragonStrikePlunge
15 - XinyanDragonStrikeNoPlunge
16 - XinyanDragonStrikePlunge
17 - XianglingDragonStrike
18 - Raiden Q DragonStrike
19 - HuTao E DragonStrike
20-Diluc DragonStrike
21 - Ganyu more
Settings tab

The path to the game folder is needed for:

  • Disable-enable cutscenes
  • Reshade settings
  • In the tray menu (where the clock lives in the start-up) there is a button "Create a shortcut to the game" with the launch parameter "-popupwindow" for playing in windowed frameless mode

If the script is outdated or does not work correctly or the game files are in a non-standard location, then uncheck the box, click "..." and select the path manually

Checkboxes(Checkboxes)

  • RU language GUI - Switch GUI to Russian
  • Tooltip MacroKey - By pressing the "Numpad" buttons, the script tells you which macro is selected (Fishing is always on)
  • GUI at startup - When starting the script, display the GUI, if off, the script will immediately hide in the tray at startup
  • RCS WinApi Bow - Control recoil when archery with macro (Numpad 4 and Numpad 5), works only(!) on WinApi and Interception mode, for calibration in "data\genConfig.ini" parameter:
"FishMouseMoveX=43"
"VentiMouseMoveX=61"
"InterceptionFishMouseMoveX=43"
"InterceptionVentiMouseMoveX=61"
  • AHK Max Speed - Maximum performance
  • FIX Macro + chat - Part of the functionality of the script will not work while open: in-game chat, map or dialogue with the NPC.
  • Run as Administrator - The script asks for admin rights before starting, half of the functionality does not work without admin rights
  • Auto Exit (3 sec) - Automatically turn off the script if the game is closed
  • Lock Skip NPS - Dialog skip mode
  • Fast pick 1-2-3-4 - Button spam 1-2-3-4

Card selection

  • 1 - Official card from Mihue
  • 2 - The very first card that everyone uses
  • 3 - Paid map, with correct chests (lvl-4)
  • 4 - Chinese map

Lyra of the Winds

  1. Download and install Python 🐍

  2. Run the batch file as administrator in the folder with the "data\pip instal.bat" script, the batch file will install the missing python libraries

  3. Vacuum the pub in search of interesting melodies in .mid format using the following links

  1. Run "Genshi AHK Flex.ahk", open the "Settings" tab

"Exp" - Open a folder with melodies.

"Parse" - Generate a playlist for a python script.

"Run" - Run a Python script

  1. Python script hotkeys:
Tab + ~ (tilt or Yo) - Refresh the list of ringtones

Tab + 1 2 3 4 5 6 7 8 9 0 - Play the melody on the lyre of the winds

Space - Stop playback

Update

  • Import - Imports settings starting from version v6.3 Press import and find in the old folder "genConfig.ini" the script reads the settings and reboots.
  • Force Update - Force download files from Github
Security Tab

Input mode selection

  • SendInput - Standard mode on which 99% of all scripts in the pub work.
  • WinApi - Able to control recoil when shooting from a bow with a macro. There is a problem: If the anti-cheat genshin is ever lifted from its knees, then there is a risk of losing your account. WinApi aka (DllCall"mouse_event") fires EAC(APEX), BattlEye(PUBG), VANGUARD(Valorant) and god knows what else. If mihue are purchased from these people for protection, then there will be trouble. For the last year, mihue have been pouring money into marketing, their hands will not reach the game soon. But I'm paranoid because of this, 1 more input mode is provided.
  • Interception - An old driver lying around in the pub since 2012, works everywhere except for VANGUARD (not exactly) and some self-written anti-cheats.

How to use Interception?

  1. Install the driver: "Security" => "Interception driver (AHI)" => "Install" (If the installer closes itself, then do not move the mouse during startup!)
  2. Reboot the computer
  3. Run "Genshi AHK Flex.ahk" => "Security" => "Interception driver (AHI)", press any button on the keyboard and mouse, the VID and PID of the device will appear, press "WR" in both cases and close the script. (If the installer closes itself, then do not move the mouse during startup!)
  4. Run "Genshi AHK Flex.ahk" => "Security" select "AHI+Input" => "Pick" => "Save"

If everything is done wrong, the script will give an error and reset the input mode. The last 2 modes are for macro archers, more specifically for recoil control. If bows are not interesting, use the first mode.

Checkboxes(Checkboxes)

Pointless functionality with a reserve for the future.

  • Name changer - Changes the name of the script every time it starts
  • Hash changer - Changes script fingerprints
  • WindowNameChanger - Random window name
  • Random 15ms (all) - Adds random 15ms, almost everywhere*
Registry Tab

The registry stores settings and authorization, what can be done from this?

  • Switch between accounts without entering the game and without solving the captcha
  • Switch between different graphics presets without entering the game

How to use?

We enter the game from the desired account, exit the game

Save registry branch "Copy" button

Download registry branch "Write" button

Clear slot "Del" button

The "Clean Registry" button cleans the registry, as if the game is running for the first time.

The "Open RegEdit" button automatically opens the registry in the right place "HKEY_CURRENT_USER\Software\miHoYo\Genshin Impact", if we messed up, we clean the registry and don't use this function anymore.

ReShade Tab

A pointless function that I rarely use, bypasses the game file check and slips dxgi.dll (ReShade) into the game.

Normal mode:

  1. Check the installation path of the game, the "Settings" tab, if the path is not correct, then uncheck "Autopath" and specify it manually
  2. Open the tray menu (this is where the clock lives) and click "Create game shortcut"
  3. Open the tab "ReShade"
  4. Press the "Instal" button and the files from the folder with the script will be copied to the folder with the game
  5. Launch the game from a shortcut on the desktop (in fact, this is a shortcut to the game with the "-popupwindow" parameter)
  • Home - Open ReShade menu
  • Insert - Enable/disable ReShade

How to use substitution:

  1. Install reshade button "Instal"
  2. Click "ReName"
  3. Open the tray menu (next to the clock), press "Create ReShade shortcut"
  4. Run the desktop script "Genshi ReShade" and run the game

Nvidia Freestyle

  • Instal - Installation of special filters that expand the capabilities of Nvidia Freestyle
Links tab

Clickable links to useful resources

  • Miscellaneous
  • Maps
  • Creamers
================================
Clone this wiki locally