Fixed json code template

_config.yml

@@ -1,2 +1,2 @@
 theme: minima
-exclude: wiki/translations
+exclude: [wiki/translations]

migrate.py

@@ -862,6 +862,7 @@ def cleanMarkdown(self,mdtext,imagepath=None,debug=0):
         if debug >= 9:
             # creating new code fences
             result = re.sub("{{Code\|code\=(.*?)}}",r"```python\1```",result,flags=flags) # replace {{Code}} templates
+            result = re.sub("{{Code\|lang\=json\|code\=(.*?)}}",r"```json\1```",result,flags=flags) # replace {{Code}} templates
             result = re.sub("{{incode\|(.*?)}}",r"`\1`",result,flags=flags) # replace {{incode}} templates
             result = re.sub(" \`\`\`",r" \n```",result,flags=flags) # make sure all ``` are on a new line
             result = re.sub("{{TRUE}}",r"`True`",result,flags=flags) # replace {{TRUE}} templates

wiki/PartDesign_Hole.md

@@ -95,7 +95,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -106,7 +107,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/de/PartDesign_Hole.md

@@ -116,7 +116,8 @@ Die Datei sollte enthalten:
     -   **diameter**: Der Durchmesser des Schnitts.
     -   **depth**: Tiefe der Flachsenkung (nicht notwendig bei Kegelsenkungen).
 
-Beispiel: {{Code|lang=json|code=
+Beispiel: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -127,7 +128,7 @@ Beispiel: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/en/PartDesign_Hole.md

@@ -95,7 +95,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -106,7 +107,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/es/PartDesign_Hole.md

@@ -95,7 +95,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -106,7 +107,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/fr/PartDesign_Hole.md

@@ -111,7 +111,8 @@ Le fichier doit contenir :
     -   **diameter** : Le diamètre de la coupe.
     -   **depth** : Profondeur du chambrage (non nécessaire pour le fraisage).
 
-Exemple : {{Code|lang=json|code=
+Exemple : 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -122,7 +123,7 @@ Exemple : {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/it/PartDesign_Hole.md

@@ -152,7 +152,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -163,7 +164,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 <div class="mw-translate-fuzzy">

wiki/translations/pl/PartDesign_Hole.md

@@ -116,7 +116,8 @@ Plik ten powinien zawierać:
     -   **średnicę**: Średnica cięcia.
     -   **głębokość**: Głębokość pogłębienia *(nie jest konieczna w przypadku pogłębiania stożkowego)*.
 
-Przykład: {{Code|lang=json|code=
+Przykład: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -127,7 +128,7 @@ Przykład: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/pt-br/PartDesign_Hole.md

@@ -95,7 +95,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -106,7 +107,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/ro/PartDesign_Hole.md

@@ -154,7 +154,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -165,7 +166,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/ru/PartDesign_Hole.md

@@ -96,7 +96,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -107,7 +108,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```
 
 
 

wiki/translations/tr/PartDesign_Hole.md

@@ -97,7 +97,8 @@ The file should contain:
     -   **diameter**: The diameter of the cut.
     -   **depth**: Depth of the counterbore (not necessary for countersink).
 
-Example: {{Code|lang=json|code=
+Example: 
+```json
 {
     "name": "DIN 7984",
     "cut_type": "counterbore",
@@ -108,7 +109,7 @@ Example: {{Code|lang=json|code=
         …
     ]
 }
-}}
+```