Skip to content

Latest commit

 

History

History
52 lines (25 loc) · 1.28 KB

README.md

File metadata and controls

52 lines (25 loc) · 1.28 KB

Simon-Arduino

A simple simon game setup to run on an Arduino Uno

By @TheCaptain

This can probably run on any arduino, but I only tried it on the UNO

Arduino IDE is suggested for compiling and uploading code to the arduino board

to download Arduino IDE go to https://www.arduino.cc/en/software

Necessities

 -1 Arduino Uno

 -1 SPDT OR SPST switch

 -4 SPST push-button switches

 -4 LED's preferably of different colors

 -2 100 ohm resistors

 -1 10K ohm resistor

 -1 five volt power regulator

 -2 4026B seven-segment drives (optional)

 -2 seven-segment displays (optional)

 -? hookup wire

 -1 USB cable

while seven-segment displays for score keeping aren't necessary, I really suggest it

Hardware Hookup

all power is routed through a SPDT switch and a 100 ohm resistor and than through a five volt power regulator (it doesn't matter what kind)

leds are hooked up to arduino outputs 2, 3, 4 and 5 on long leg and short leg to ground

buttons are hooked up to arduino inputs A0, A1, A2 and A3 and power through a 10K ohm resistor

output 12 goes to pin 1 on a 4026B seven-segment drive chip, which is than carried to another 4026B and than to two seven-segment displays

4026B's are powered through a 100 ohm resistor