Mac #1843
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #----------------------------------------------------------------------------------------------------------------------- | |
| # .github/workflows/mac.yml is part of Brewtarget, and is copyright the following authors 2021-2024: | |
| # • Artem Martynov <[email protected]> | |
| # • Mattias Måhl <[email protected]> | |
| # • Matt Young <[email protected]> | |
| # | |
| # Brewtarget is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License | |
| # as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later | |
| # version. | |
| # | |
| # Brewtarget is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied | |
| # warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more | |
| # details. | |
| # | |
| # You should have received a copy of the GNU General Public License along with this program. If not, see | |
| # <http://www.gnu.org/licenses/>. | |
| #----------------------------------------------------------------------------------------------------------------------- | |
| name: Mac | |
| on: | |
| push: | |
| branches: | |
| - develop | |
| - "stable/**" | |
| pull_request: | |
| branches: | |
| - develop | |
| schedule: | |
| - cron: "0 2 * * *" | |
| env: | |
| # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.) | |
| BUILD_TYPE: Release | |
| jobs: | |
| build-mac: | |
| runs-on: macos-latest | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| fetch-depth: 0 | |
| # | |
| # Tried to install MacPorts from the bt script, but get errors running its configure script, so trying from GitHub | |
| # actions. | |
| # | |
| - uses: melusina-org/setup-macports@v1 | |
| # | |
| # The `brew doctor` command just checks that Homebrew (https://brew.sh/) is installed OK (expected output is "Your | |
| # system is ready to brew". Having Homebrew installed should imply the Xcode Command Line Tools are also | |
| # installed, but `xcode-select -p` confirms this (expected output "/Library/Developer/CommandLineTools"). As | |
| # elsewhere we use the echo trick to ensure that a non-zero return value from these diagnostic commands is not | |
| # treated as a build script failure. | |
| # | |
| # Running `bt setup all` will, amongst other things install the tree command. | |
| # | |
| - name: Install Frameworks and Libraries, and set up Meson build environment | |
| run: | | |
| echo "Output from brew doctor: $(brew doctor)" | |
| echo "Output from xcode-select -p: $(xcode-select -p)" | |
| brew install [email protected] | |
| echo "Python3 ($(which python3)) version" | |
| /usr/bin/env python3 --version | |
| echo "Running ./bt -v setup all" | |
| ./bt -v setup all | |
| - name: Build (with Meson) | |
| run: | | |
| cd mbuild | |
| pwd | |
| meson compile | |
| # | |
| # On Mac, we currently (2024-05-05) get a build error with CMake: | |
| # CMake Error at /opt/homebrew/lib/cmake/Qt5Core/Qt5CoreConfig.cmake:14 (message): | |
| # The imported target "Qt5::Core" references the file | |
| # "/opt/homebrew/.//mkspecs/macx-clang" | |
| # but this file does not exist. | |
| # | |
| # I couldn't easily find a fix. So, since the Meson build works fine, just commenting out the Mac CMake build | |
| # for now. | |
| # | |
| #- name: Build (with CMake) | |
| # env: | |
| # QT_QPA_PLATFORM: offscreen | |
| # # Change `make` to `make VERBOSE=1` to get hugely detailed output | |
| # run: | | |
| # export PATH=/usr/local/opt/qt5/bin:$PATH | |
| # export CMAKE_PREFIX_PATH=/usr/local/opt/qt@5 | |
| # mkdir build | |
| # cd build | |
| # cmake .. | |
| # make | |
| # | |
| - name: Prep for tests | |
| # If a test fails and we get a core, we'd like to analyse it. This will be easier if we have access to the | |
| # relevant directories and there aren't any other files cluttering up the place. | |
| # | |
| # Running the commands inside an echo statement is a bit of a trick to ensure failure of the rm command (eg | |
| # because there are no files to delete) does not count as a build script failure (because the echo command will | |
| # return 0 = success). | |
| run: | | |
| sudo chmod -R +rwx /cores | |
| sudo chmod -R +rwx /Library/Logs/DiagnosticReports | |
| echo "Clearing contents of /cores directory: $(ls -ltr /cores) $(rm -rf /cores/*)" | |
| echo "Clearing contents of /Library/Logs/DiagnosticReports directory: $(ls -ltr /Library/Logs/DiagnosticReports) $(rm -rf /Library/Logs/DiagnosticReports/*)" | |
| - name: Automated tests (via Meson) | |
| # If something does crash we'd like to capture the core, so we need to enable core dumps - hence the call to | |
| # ulimit. | |
| # | |
| # The 'export QT_DEBUG_PLUGINS=1' give us diagnostics in the event that there are problems initialising QT | |
| # The 'export QT_QPA_PLATFORM=offscreen' stops Qt's xcb sub-module trying to connect to a non-existent display | |
| # (which would cause the test runner to abort before running any tests). | |
| run: | | |
| ulimit -c unlimited | |
| echo "Core size limit is $(ulimit -c)" | |
| cd mbuild | |
| export QT_DEBUG_PLUGINS=1 | |
| export QT_QPA_PLATFORM=offscreen | |
| meson test | |
| # | |
| # Since we commented out the Mac CMake build, we also need to comment out the CMake tests. The same tests are run | |
| # via Meson, so we're not losing any coverage here other than of the CMake script itself. | |
| # | |
| #- name: Automated tests (via CMake) | |
| # # If something does crash we'd like to capture the core, so we need to enable core dumps - hence the call to | |
| # # ulimit. | |
| # # | |
| # # Running "make test" boils down to running ctest (because the invocation of make in the Build step above will | |
| # # have done all the necessary prep. Running ctest directly allows us to pass in extra parameters to try to get as | |
| # # much diagnostics as possible out of a remote build such as this. | |
| # run: | | |
| # ulimit -c unlimited | |
| # echo "Core size limit is $(ulimit -c)" | |
| # cd build | |
| # ctest --extra-verbose --output-on-failure 2>&1 | |
| # Note that, although we continue to support CMake for local builds and installs, we no longer support packaging | |
| # with CPack/CMake -- not least because it was very hard to get things working on Mac. The bt build script | |
| # packaging works fine and gives us better control over the packaging process. | |
| - name: Package | |
| shell: bash | |
| run: | | |
| cd mbuild | |
| umask 022 | |
| ../bt -v package | |
| cd packages | |
| pwd | |
| tree -sh | |
| - name: Upload Mac Packages (Installers) | |
| if: ${{ success() }} | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: brewtarget-dev-mac | |
| path: | | |
| ${{github.workspace}}/mbuild/packages/darwin/brewtarget*.dmg | |
| ${{github.workspace}}/mbuild/packages/darwin/brewtarget*.dmg.sha256sum | |
| retention-days: 7 | |
| - name: Post-processing on any core dump | |
| if: ${{ failure() }} | |
| # It's all very well capturing core files, but if you don't have a Mac to analyse them on they are not a fat lot | |
| # of use. So, if we did get a core, let's at least get a stack trace out of it. | |
| # | |
| # The loop in the last line should run either 0 or 1 times, depending on whether the build failure did or did not | |
| # generate a core file. | |
| # ls -1 | while read ii; do echo "bt" | lldb -c $ii; done | |
| run: | | |
| pwd | |
| tree -sh | |
| sudo chmod -R +rwx /cores | |
| sudo chmod -R +rwx /Library/Logs/DiagnosticReports | |
| echo "Contents of /cores directory: $(ls -ltr /cores)" | |
| echo "Contents of /Library/Logs/DiagnosticReports directory: $(ls -ltr /Library/Logs/DiagnosticReports)" | |
| cd /cores | |
| ls -1 | while read ii; do echo "bt" | lldb -c $ii; done | |
| - name: Recover Debris Artifacts (aka build output) - CMake | |
| if: ${{ failure() }} | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: build-results-mac | |
| path: ${{github.workspace}}/build | |
| retention-days: 1 | |
| - name: Recover Debris Artifacts (aka build output) - Meson | |
| if: ${{ failure() }} | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: mbuild-results-mac | |
| path: ${{github.workspace}}/mbuild | |
| retention-days: 1 | |
| - name: Recover DiagnosticReports (if any) | |
| if: ${{ failure() }} | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: DiagnosticReports-mac | |
| path: /Library/Logs/DiagnosticReports | |
| retention-days: 1 | |
| - name: Recover Cores (if any) | |
| if: ${{ failure() }} | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: cores-mac | |
| path: /cores | |
| retention-days: 1 | |
| # Meson test doesn't show log output on the terminal, but puts it straight to a log file. We don't want to have | |
| # to download the whole compressed mbuild tree just to see the log in event of a test failure, so we show it here | |
| # (provided it exists). | |
| - name: Show Meson test logs | |
| if: ${{ failure() }} | |
| working-directory: ${{github.workspace}} | |
| shell: bash | |
| run: | | |
| if [[ -f mbuild/meson-logs/testlog.txt ]]; then cat mbuild/meson-logs/testlog.txt; fi |