v2.1.4

Summary

This patch fixes an startup issue and improves logging.

Do not attempt to intstall on BTCPay v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.1.3

Summary

This patch includes some UI fixes for the status and wallet page.

Do not attempt to install on v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.1.1

Summary

BTCPay Server version 2.0.1 is required

This release officially moves the plugin out of its beta phase.

Do not attempt to install on v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.1.0

Summary

BTCPay Server version 2.0.1 is required

This release includes several bug fixes, and major improvements to the rebalancing mode.

Do not attempt to install on v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.0.3

Summary

BTCPay Server version 2.0.1 is required

This release re-enables pull payments along some other minor fixes.

Do not attempt to install on v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.0.2

Summary

This release disables temporarily disables pull payments due to a btcpay v2 regression.

Do not install this on btcpay v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output:

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK

v2.0.1

Summary

This release includes a fix for pull payments on btcpay v2.

Do not attempt to install on btcpay v1

Uploading to BTCPay

You can upload the BTCPayServer.Plugins.Boltz.btcpay file to your btcpay server by navigating to Plugins and scrolling all the way down to Upload Plugin.

Verifying the Release

In order to verify the release, you'll need to have gpg or gpg2 installed on your system. You'll first need to import the keys that have signed this release if you haven't done so already:

curl https://raw.githubusercontent.com/BoltzExchange/boltz-btcpay-plugin/master/keys/jackstar.asc | gpg --import

Once you have the required PGP keys, you can verify the release (assuming SHA256SUMS and SHA256SUMS.sig are in the current directory) with:

gpg --verify SHA256SUMS.sig

You should see the following if the verification was successful:

gpg: Signature made Do 31 Okt 2024 13:56:07 CET
gpg:                using RSA key A73B8D6D8C23D4D2943B67A837308B01365311D1
gpg: Good signature from "jackstar12 <[email protected]>" [ultimate]

You should also verify that the hashes still match with the archive you've downloaded.

sha256sum --ignore-missing -c SHA256SUMS

If your archive is valid, you should see the following output (depending on the archive you've downloaded):

BTCPayServer.Plugins.Boltz.btcpay.json: OK
BTCPayServer.Plugins.Boltz.btcpay: OK