Kafka Monitoring Extension for AppDynamics

Use Case

Apache Kafka® is a distributed, fault-tolerant streaming platform. It can be used to process streams of data in real-time.The Kafka Monitoring extension can be used with a standalone machine agent to provide metrics for multiple Apache Kafka.

Prerequisites

• Before the extension is installed, the prerequisites mentioned here need to be met. Please do not proceed with the extension installation if the specified prerequisites are not met.
• Download and install Apache Maven which is configured with Java 8 to build the extension artifact from source. You can check the java version used in maven using command mvn -v or mvn --version. If your maven is using some other java version then please download java 8 for your platform and set JAVA_HOME parameter before starting maven.
• The extension also needs a Kafka server installed.
• The extension needs to be able to connect to Kafka in order to collect and send metrics. To do this, you will have to either establish a remote connection in between the extension and the product, or have an agent on the same machine running the product in order for the extension to collect and send the metrics.

Installation

• Clone the "kafka-monitoring-extension" repo using git clone <repoUrl> command.
• Run 'mvn clean install' from "kafka-monitoring-extension". This will produce a KafkaMonitor-VERSION.zip in the target directory.
• Unzip the file KafkaMonitor-[version].zip into <MACHINE_AGENT_HOME>/monitors/
• In the newly created directory "KafkaMonitor", edit the config.yml to configure the parameters (See Configuration section below)
• Restart the Machine Agent

Configuration

1. Configuring ports

• According to Oracle's explanation, JMX opens 3 different ports:

  • One is the JMX connector port(the one in config.yml)
  • One for the RMIRegistry
  • The third one is an ephemeral port is RMI registry of the local only server

• We can explicitly configure the first two ports in the Kakfa start-up scripts to avoid it picking random ports.

• Here port 9999 is used as JMX Connector port 9998 is used as the JMX/RMI port.

• The third one, however, is an ephemeral port(that's how JMX works).

• Test connection to the Kafka host and ports 9999 and 9998 from the machine where the extension is installed.

      For example, to test connection to the localhost on port 9999, use
       nc -v localhost 9999.
  

• If the message Connection to localhost port 9999 [tcp/distinct] succeeded!is displayed, it confirms the access to the Kafka server.

2. Enabling JMX in Kafka

• To enable JMX monitoring for Kafka broker, a JMX_PORT has to be configured to allow monitoring on that port.
  Edit the Kafka start-up script <Kafka Installation Folder>/bin/kafka-server-start.sh to include:
  export JMX_PORT=${JMX_PORT:-9999}
  This configures port 9999 as the JMX port of Kafka.
• Please note that the Kafka server needs to be restarted once the JMX port is added.

3. Configuring Kafka for non-SSL monitoring

This section outlines the configuration of the Kafka start-up scripts if monitoring is not done over SSL.If SSL is being used please skip to Setting up SSL in Kafka.

• To enable monitoring, some flags need to be set in the Kafka start-up scripts. Edit <Kafka Installation Folder>/bin/kafka-run-class.sh and modify KAFKA_JMX_OPTS variable like below
  KAFKA_JMX_OPTS="-Dcom.sun.management.jmxremote=true -Dcom.sun.management.jmxremote.rmi.port=9998 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false"
• Please also include -Djava.rmi.server.hostname=your.host.ip to the KAFKA_JMX_OPTS variable if you are monitoring Kafka from a remote machine.
• Also, the changes to kafka-run-class.sh has to be made on all the Kafka servers that are being monitored.
• Please note that any changes to kafka-run-class.sh needs the Kafka server to be restarted for the changes to take effect.

4. Monitoring over SSL

If you need to monitor your Kafka servers securely via SSL, please follow the following steps:

4.1. Configuring Kafka for monitoring over SSL

Edit <Kafka Installation Folder>/bin/kafka-run-class.sh and modify KAFKA_JMX_OPTS variable, as listed below:

KAFKA_JMX_OPTS="-Dcom.sun.management.jmxremote=true -Dcom.sun.management.jmxremote.rmi.port=9998 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=true -Djavax.net.ssl.keyStore=/Absolute/path/to/keystore -Djavax.net.ssl.keyStorePassword=password -Dcom.sun.management.jmxremote.registry.ssl=false"

• Please also include -Djava.rmi.server.hostname=your.host.ip to the KAFKA_JMX_OPTS variable if you are monitoring Kafka from a remote machine.

4.2. Configuring the Extension to use SSL

• The Machine Agent and the extension also need to be configured to use SSL. Please add these flags to the Machine Agent start-up command: -Djavax.net.ssl.trustStore=/path/to/client.truststore.jks -Djavax.net.ssl.trustStorePassword=yourpassword

5. Password Settings

If you need password authentication, the password needs to be set in the JVM of the Kafka server. To know more on how to set the credentials, please see section Using Password and Access Files in this link.

6. Config.yml

Configure the Kafka monitoring extension by editing the config.yml file in <MACHINE_AGENT_HOME>/monitors/KafkaMonitor/

• Configure the "tier" under which the metrics need to be reported. This can be done by changing the value of <Component-ID> in metricPrefix: "Server|Component:<Component-ID>|Custom Metrics|Kafka".
  Please refer this link to find Component-ID of your tiers. For example,

  metricPrefix: "Server|Component:19|Custom Metrics|Kafka"
  

• Configure the Kafka servers by specifying either serviceUrl or <host,port> of all Kafka servers.

  • Here, host is the IP address. of the Kafka server to be monitored, and port is the JMX port of the Kafka server.
  • Please provide username & password (only if authentication enabled).
  • encryptedPassword(only if password encryption required).

• Configure the encyptionKey for encryptionPasswords(only if password encryption required).

    For example,
    #Encryption key for Encrypted password.
    encryptionKey: "axcdde43535hdhdgfiniyy576"
  

• Configure the numberOfThreads according to the number of Kafka instances that are being monitored on one extension.Each server needs one thread. For example, If number Kafka servers that need to be monitored by one extension is 10, then number of threads is 10 numberOfThreads: 10

• Configure the metrics section.
  For configuring the metrics, the following properties can be used:

  Metric Property	Default value	Possible values	Description
  alias	metric name	Any string	The substitute name to be used in the metric browser instead of metric name.
  aggregationType	"AVERAGE"	"AVERAGE", "SUM", "OBSERVATION"	Aggregation qualifier
  timeRollUpType	"AVERAGE"	"AVERAGE", "SUM", "CURRENT"	Time roll-up qualifier
  clusterRollUpType	"INDIVIDUAL"	"INDIVIDUAL", "COLLECTIVE"	Cluster roll-up qualifier
  multiplier	1	Any number	Value with which the metric needs to be multiplied.
  convert	null	Any key value map	Set of key value pairs that indicates the value to which the metrics need to be transformed. eg: UP:0, DOWN:1
  delta	false	true, false	If enabled, gives the delta values of metrics instead of actual values.

  For example, objectName: "kafka.server:type=BrokerTopicMetrics, * will fetch metrics of all objects nested under BrokerTopicMetrics.

       - objectName: "kafka.server:type=BrokerTopicMetrics,*"
            metrics:
                - Count:
                   alias: "Count"
                   multiplier: ""
                   delta: false
                   aggregationType: "OBSERVATION"
                   timeRollUpType: "AVERAGE"
                   clusterRollUpType: "INDIVIDUAL"
      
                - MeanRate:
                   alias: "Mean Rate"
                   multiplier: ""
                   delta: false
                   aggregationType: "AVERAGE"
                   timeRollUpType: "AVERAGE"
                   clusterRollUpType: "INDIVIDUAL"
  

  All these metric properties are optional, and the default value shown in the table is applied to the metric(if a property has not been specified) by default. If you need a metric from a specific object under an mBean, objectName: kafka.server:type=ReplicaManager,name=IsrExpandsPerSec will return only those metrics corresponding to the IsrExpandsPerSec object.

7. Validating config.yml:

• Please copy all the contents of the config.yml file and go to Yaml Validator.
• On reaching the website, paste the contents and press the “Validate YAML” button.
  
• If you get a valid output, that means your formatting is correct and you may move on to the next step.

Metrics

• This extension collects metrics via JMX and can be configured to report any of the metrics that Kafka exposes. It provides metrics on Kafka server, controller and the network.
• In addition, it also provides the JVM metrics:
  HeapMemoryUsage.committed, HeapMemoryUsage.max, NonHeapMemoryUsage.committed, NonHeapMemoryUsage.max
• There is also a HeartBeat metric underkafka.server which denotes whether the connection from the extension to the Kafka server was successful(1 = Successful, 0 = Unsuccessful).

Credentials Encryption

Please visit this page to get detailed instructions on password encryption. The steps in this document will guide you through the whole process.

Extensions Workbench

Workbench is an inbuilt feature provided with each extension in order to assist you to fine tune the extension setup before you actually deploy it on the controller. Please review the following document for how to use the Extensions WorkBench

Troubleshooting

Please follow the steps listed in the extensions troubleshooting document in order to troubleshoot your issue. These are a set of common issues that customers might have faced during the installation of the extension.

Contributing

Always feel free to fork and contribute any changes directly via GitHub.

Version

Name	Version
Extension Version:	2.0.6
Tested On:	Apache Kafka 2.0.0
Operating System Tested On:	Mac OS, Linux
Last updated On:	09/09/2024
List of changes to this extension	Change log

Note: While extensions are maintained and supported by customers under the open-source licensing model, they interact with agents and Controllers that are subject to AppDynamics’ maintenance and support policy. Some extensions have been tested with AppDynamics 4.5.13+ artifacts, but you are strongly recommended against using versions that are no longer supported.