Skip to content
This repository has been archived by the owner on Dec 9, 2021. It is now read-only.

FoFix doesn't start on retropie 4.4 #295

Open
justnibio opened this issue May 25, 2018 · 12 comments
Open

FoFix doesn't start on retropie 4.4 #295

justnibio opened this issue May 25, 2018 · 12 comments

Comments

@justnibio
Copy link

Retropie 4.4 - Raspberry pi3 b +
By launching the game, return this error (runcommand.log):

Parameters:
Executing: LD_LIBRARY_PATH=/opt/retropie/supplementary/glshim LIBGL_FB=1 xinit fofix

X.Org X Server 1.19.2
Release Date: 2017-03-02
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
Current Operating System: Linux retropie 4.14.30-v7+ #1102 SMP Mon Mar 26 16:45:
49 BST 2018 armv7l
Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight
=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=f2d3cb4f-02
rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait loglevel=3 consolebl
ank=0 plymouth.enable=0
Build Date: 18 October 2017 04:55:30PM
xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Fri May 25 08:39:0
5 2018
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
libEGL warning: DRI3: xcb_connect failed
libEGL warning: DRI2: xcb_connect failed
libEGL warning: DRI2: xcb_connect failed
LIBGL: Error while gathering supported extension (eglInitialize: EGL_NOT_INITIAL
IZED), default to none
(EE)
Fatal server error:
(EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" f
or additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
LIBGL: Initialising gl4es
LIBGL: v1.0.7 built on May 18 2018 08:00:58
LIBGL: framebuffer output enabled
LIBGL: Using GLES 1.1 backend
LIBGL:loaded: libbcm_host.so
LIBGL:loaded: libvcos.so
LIBGL:loaded: libGLESv1_CM.so.1
LIBGL:loaded: libEGL.so.1
LIBGL: Using GLES 1.1 backend
LIBGL: Targeting OpenGL 1.5
LIBGL: glXMakeCurrent FBO workaround enabled
LIBGL: Current folder is:/home/pi
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

@fofixuser
Copy link

I have the exact same issue

@fofixuser
Copy link

The Xorg error is attached

[ 88150.629]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 88150.629] X Protocol Version 11, Revision 0
[ 88150.629] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[ 88150.630] Current Operating System: Linux raspberrypi 4.14.34-v7+ #1110 SMP Mon Apr 16 15:18:51 BST 2018 armv7l
[ 88150.630] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=da63f069-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0
[ 88150.631] Build Date: 18 October 2017 04:55:30PM
[ 88150.631] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[ 88150.632] Current version of pixman: 0.34.0
[ 88150.632] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 88150.632] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88150.634] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Tue May 29 20:52:19 2018
[ 88150.634] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 88150.635] (==) No Layout section. Using the first Screen section.
[ 88150.635] (==) No screen section available. Using defaults.
[ 88150.635] (
) |-->Screen "Default Screen Section" (0)
[ 88150.635] () | |-->Monitor ""
[ 88150.636] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 88150.636] (
) | |-->Device "Allwinner A10/A13 FBDEV"
[ 88150.636] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 88150.637] (==) Automatically adding devices
[ 88150.637] (==) Automatically enabling devices
[ 88150.637] (==) Automatically adding GPU devices
[ 88150.637] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 88150.637] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 88150.637] Entry deleted from font path.
[ 88150.637] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 88150.637] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 88150.637] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 88150.637] (II) Loader magic: 0x1fbf40
[ 88150.637] (II) Module ABI versions:
[ 88150.637] X.Org ANSI C Emulation: 0.4
[ 88150.637] X.Org Video Driver: 23.0
[ 88150.637] X.Org XInput driver : 24.1
[ 88150.637] X.Org Server Extension : 10.0
[ 88150.641] (++) using VT number 1

[ 88150.650] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 88150.651] (II) no primary bus or device found
[ 88150.651] (II) LoadModule: "glx"
[ 88150.652] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 88150.656] (II) Module glx: vendor="X.Org Foundation"
[ 88150.656] compiled for 1.19.2, module version = 1.0.0
[ 88150.656] ABI class: X.Org Server Extension, version 10.0
[ 88150.656] (II) LoadModule: "fbturbo"
[ 88150.657] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[ 88150.657] (II) Module fbturbo: vendor="X.Org Foundation"
[ 88150.657] compiled for 1.19.2, module version = 0.5.1
[ 88150.657] Module class: X.Org Video Driver
[ 88150.657] ABI class: X.Org Video Driver, version 23.0
[ 88150.657] (II) FBTURBO: driver for framebuffer: fbturbo
[ 88150.657] (WW) Falling back to old probe method for fbturbo
[ 88150.657] (II) Loading sub module "fbdevhw"
[ 88150.657] (II) LoadModule: "fbdevhw"
[ 88150.660] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 88150.661] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 88150.661] compiled for 1.19.2, module version = 0.0.2
[ 88150.661] ABI class: X.Org Video Driver, version 23.0
[ 88150.661] (II) FBTURBO(0): using /dev/fb0
[ 88150.661] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 88150.661] (II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 88150.661] (==) FBTURBO(0): Depth 24, (==) framebuffer bpp 32
[ 88150.661] (==) FBTURBO(0): RGB weight 888
[ 88150.661] (==) FBTURBO(0): Default visual is TrueColor
[ 88150.661] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[ 88150.661] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 3600kB)
[ 88150.661] () FBTURBO(0): Option "fbdev" "/dev/fb0"
[ 88150.661] (
) FBTURBO(0): Option "SwapbuffersWait" "true"
[ 88150.662] (II) FBTURBO(0): processor: Unknown
[ 88150.662] (II) FBTURBO(0): checking modes against framebuffer device...
[ 88150.662] (II) FBTURBO(0): checking modes against monitor...
[ 88150.662] (--) FBTURBO(0): Virtual size is 1280x720 (pitch 1280)
[ 88150.662] () FBTURBO(0): Built-in mode "current"
[ 88150.662] (==) FBTURBO(0): DPI set to (96, 96)
[ 88150.662] (II) Loading sub module "fb"
[ 88150.662] (II) LoadModule: "fb"
[ 88150.662] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 88150.663] (II) Module fb: vendor="X.Org Foundation"
[ 88150.663] compiled for 1.19.2, module version = 1.0.0
[ 88150.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 88150.663] (==) Depth 24 pixmap format is 32 bpp
[ 88150.664] (II) FBTURBO(0): using backing store heuristics
[ 88150.665] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[ 88150.669] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[ 88150.669] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[ 88150.669] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[ 88150.669] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[ 88150.669] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[ 88150.669] (==) FBTURBO(0): Backing store enabled
[ 88150.670] (==) FBTURBO(0): DPMS enabled
[ 88150.670] (II) FBTURBO(0): failed to enable hardware cursor
[ 88150.670] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[ 88150.670] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[ 88150.670] (==) RandR enabled
[ 88150.689] (II) SELinux: Disabled on system
[ 88150.691] (II) AIGLX: Screen 0 is not DRI2 capable
[ 88150.692] (EE) AIGLX: reverting to software rendering
[ 88151.518] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 88151.523] (II) IGLX: Loaded and initialized swrast
[ 88151.523] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 88151.831] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/event2)
[ 88151.831] (II) No input driver specified, ignoring this device.
[ 88151.831] (II) This device may have been added with another device file.
[ 88151.833] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/js0)
[ 88151.833] (II) No input driver specified, ignoring this device.
[ 88151.833] (II) This device may have been added with another device file.
[ 88151.835] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/event3)
[ 88151.835] (II) No input driver specified, ignoring this device.
[ 88151.835] (II) This device may have been added with another device file.
[ 88151.837] (II) config/udev: Adding input device YSTEK MICREAL USB Gamepad (/dev/input/js1)
[ 88151.837] (II) No input driver specified, ignoring this device.
[ 88151.838] (II) This device may have been added with another device file.
[ 88151.840] (II) config/udev: Adding input device Logitech M510 (/dev/input/event4)
[ 88151.840] (
) Logitech M510: Applying InputClass "libinput pointer catchall"
[ 88151.840] (II) LoadModule: "libinput"
[ 88151.840] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 88151.849] (II) Module libinput: vendor="X.Org Foundation"
[ 88151.849] compiled for 1.19.0, module version = 0.23.0
[ 88151.849] Module class: X.Org XInput Driver
[ 88151.849] ABI class: X.Org XInput driver, version 24.1
[ 88151.849] (II) Using input driver 'libinput' for 'Logitech M510'
[ 88151.851] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[ 88151.851] () Logitech M510: always reports core events
[ 88151.851] (
) Option "Device" "/dev/input/event4"
[ 88151.851] () Option "_source" "server/udev"
[ 88151.853] (II) input device 'Logitech M510', /dev/input/event4 is tagged by udev as: Mouse
[ 88151.853] (II) Device 'Logitech M510' set to 800 DPI
[ 88151.853] (II) input device 'Logitech M510', /dev/input/event4 is a pointer caps
[ 88151.854] (
) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:1025.0008/input/input4/event4"
[ 88151.854] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 6)
[ 88151.854] () Option "AccelerationScheme" "none"
[ 88151.854] (
) Logitech M510: (accel) selected scheme none/0
[ 88151.854] () Logitech M510: (accel) acceleration factor: 2.000
[ 88151.854] (
) Logitech M510: (accel) acceleration threshold: 4
[ 88151.856] (II) input device 'Logitech M510', /dev/input/event4 is tagged by udev as: Mouse
[ 88151.856] (II) Device 'Logitech M510' set to 800 DPI
[ 88151.856] (II) input device 'Logitech M510', /dev/input/event4 is a pointer caps
[ 88151.858] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse1)
[ 88151.858] (II) No input driver specified, ignoring this device.
[ 88151.858] (II) This device may have been added with another device file.
[ 88151.861] (II) config/udev: Adding input device mini keyboard (/dev/input/event0)
[ 88151.861] () mini keyboard: Applying InputClass "libinput keyboard catchall"
[ 88151.861] (II) Using input driver 'libinput' for ' mini keyboard'
[ 88151.862] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0
[ 88151.862] (
) mini keyboard: always reports core events
[ 88151.862] () Option "Device" "/dev/input/event0"
[ 88151.862] (
) Option "_source" "server/udev"
[ 88151.864] (II) input device ' mini keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 88151.864] (II) input device ' mini keyboard', /dev/input/event0 is a keyboard
[ 88151.864] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1997:2433.0005/input/input0/event0"
[ 88151.864] (II) XINPUT: Adding extended input device " mini keyboard" (type: KEYBOARD, id 7)
[ 88151.864] (
) Option "xkb_model" "pc105"
[ 88151.864] () Option "xkb_layout" "gb"
[ 88151.932] (II) input device ' mini keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 88151.932] (II) input device ' mini keyboard', /dev/input/event0 is a keyboard
[ 88151.935] (II) config/udev: Adding input device mini keyboard (/dev/input/event1)
[ 88151.935] (
) mini keyboard: Applying InputClass "libinput pointer catchall"
[ 88151.935] () mini keyboard: Applying InputClass "libinput keyboard catchall"
[ 88151.935] (II) Using input driver 'libinput' for ' mini keyboard'
[ 88151.936] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 23 paused 0
[ 88151.936] (
) mini keyboard: always reports core events
[ 88151.936] () Option "Device" "/dev/input/event1"
[ 88151.937] (
) Option "_source" "server/udev"
[ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is a pointer caps
[ 88151.938] (II) input device ' mini keyboard', /dev/input/event1 is a keyboard
[ 88151.939] (II) libinput: mini keyboard: needs a virtual subdevice
[ 88151.939] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0006/input/input1/event1"
[ 88151.939] (II) XINPUT: Adding extended input device " mini keyboard" (type: MOUSE, id 8)
[ 88151.939] (
) Option "AccelerationScheme" "none"
[ 88151.939] () mini keyboard: (accel) selected scheme none/0
[ 88151.939] (
) mini keyboard: (accel) acceleration factor: 2.000
[ 88151.939] () mini keyboard: (accel) acceleration threshold: 4
[ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is a pointer caps
[ 88151.941] (II) input device ' mini keyboard', /dev/input/event1 is a keyboard
[ 88151.943] (II) config/udev: Adding input device mini keyboard (/dev/input/mouse0)
[ 88151.943] (II) No input driver specified, ignoring this device.
[ 88151.943] (II) This device may have been added with another device file.
[ 88151.953] (
) mini keyboard: Applying InputClass "libinput pointer catchall"
[ 88151.953] () mini keyboard: Applying InputClass "libinput keyboard catchall"
[ 88151.953] (II) Using input driver 'libinput' for ' mini keyboard'
[ 88151.954] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[ 88151.954] (
) mini keyboard: always reports core events
[ 88151.954] () Option "Device" "/dev/input/event1"
[ 88151.954] (
) Option "_source" "_driver/libinput"
[ 88151.954] (II) libinput: mini keyboard: is a virtual subdevice
[ 88151.954] () Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:2433.0006/input/input1/event1"
[ 88151.954] (II) XINPUT: Adding extended input device " mini keyboard" (type: KEYBOARD, id 9)
[ 88151.954] (
) Option "xkb_model" "pc105"
[ 88151.954] (**) Option "xkb_layout" "gb"

@symbios24
Copy link

try to update the firmware with sudo rpi-update maybe it will fix the error

@fofixuser
Copy link

fofixuser commented May 30, 2018

I'll can try that later today! Could this be related to the update made 17 days ago to exclude the xorg xserver-xorg-legacy package?

SCRIPT UPDATE
2 scriptmodules/ports/fofix.sh
@@ -16,7 +16,7 @@ rp_module_section="exp"
rp_module_flags="!mali !x86"

function depends_fofix() {
- getDepends cmake xorg xserver-xorg-legacy

  • getDepends cmake xorg
    }

function sources_fofix() {

@symbios24
Copy link

install the xorg manual to see if its that

@fofixuser
Copy link

So apt-get install xorg?

@symbios24
Copy link

or xorg or xserver-xorg-legacy

@fofixuser
Copy link

fofixuser commented Jun 6, 2018

Thanks for your help. I've tried that it didn't work. I've also tried giving permissions to the xorg folder.

@fofixuser
Copy link

New error after installing stuff and granting some permissions

[336283.856]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[336283.857] X Protocol Version 11, Revision 0
[336283.857] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[336283.857] Current Operating System: Linux raspberrypi 4.14.43-v7+ #1115 SMP Fri May 25 14:27:48 BST 2018 armv7l
[336283.857] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=da63f069-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles plymouth.enable=0
[336283.859] Build Date: 18 October 2017 04:55:30PM
[336283.859] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[336283.859] Current version of pixman: 0.34.0
[336283.860] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[336283.860] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[336283.862] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Tue Jun 5 21:24:49 2018
[336283.862] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[336283.863] (==) No Layout section. Using the first Screen section.
[336283.863] (==) No screen section available. Using defaults.
[336283.863] (
) |-->Screen "Default Screen Section" (0)
[336283.863] () | |-->Monitor ""
[336283.864] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[336283.864] (
) | |-->Device "Allwinner A10/A13 FBDEV"
[336283.864] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[336283.865] (==) Automatically adding devices
[336283.865] (==) Automatically enabling devices
[336283.865] (==) Automatically adding GPU devices
[336283.865] (==) Max clients allowed: 256, resource mask: 0x1fffff
[336283.865] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[336283.865] Entry deleted from font path.
[336283.865] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[336283.865] (==) ModulePath set to "/usr/lib/xorg/modules"
[336283.865] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[336283.865] (II) Loader magic: 0x1fbf40
[336283.865] (II) Module ABI versions:
[336283.865] X.Org ANSI C Emulation: 0.4
[336283.865] X.Org Video Driver: 23.0
[336283.866] X.Org XInput driver : 24.1
[336283.866] X.Org Server Extension : 10.0
[336283.878] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c5
[336283.879] (II) no primary bus or device found
[336283.879] (II) LoadModule: "glx"
[336283.880] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[336283.959] (II) Module glx: vendor="X.Org Foundation"
[336283.959] compiled for 1.19.2, module version = 1.0.0
[336283.959] ABI class: X.Org Server Extension, version 10.0
[336283.959] (II) LoadModule: "fbturbo"
[336283.959] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[336283.960] (II) Module fbturbo: vendor="X.Org Foundation"
[336283.960] compiled for 1.19.2, module version = 0.5.1
[336283.960] Module class: X.Org Video Driver
[336283.960] ABI class: X.Org Video Driver, version 23.0
[336283.960] (II) FBTURBO: driver for framebuffer: fbturbo
[336283.961] (EE)
Fatal server error:
[336283.961] (EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
[336283.961] (EE)
[336283.961] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[336283.961] (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.
[336283.961] (EE)
[336283.962] (WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
[336283.962] (WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
[336283.982] (EE) Server terminated with error (1). Closing log file.

@zerojay
Copy link
Owner

zerojay commented Jun 7, 2018

[336283.961] (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.

@andy5macht
Copy link

Same problem here.
If i can help (for exampe with new logs) let me know!

@pgmillon
Copy link

Hi,
Seems similar to the issue I had with Chromium, fixed following @zerojay steps: #196 (comment).

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Labels
None yet
Projects
None yet
Development

No branches or pull requests

6 participants