- Source code fork of cronos and ethermint.
+ A source code fork of Cronos and Ethermint
-## Node requirements
-
-- 300GB+ good hard drive disk
-- 8GB+ RAM (if necessary it will use at max 150GB from hard drive as swap, see below)
-- 4 CPU Threads
-- Good Internet Connection
-
-## **Script**
-
-### Overview
-
-`genesisd.sh` is available in the root folder of the repository. Running `sh genesisd.sh` gives an overview of what the script is capable of.
-
-```
-Usage: genesisd.sh [moniker]
- should be either 'upgrade' or 'init'
-
- Options:
- --crisis-skip Makes sure that genesisd starts with the --x-crisis-skip-assert-invariants flag (default: false)
- --skip-state-download Skips downloading the genesis.json file, only do this if you're certain to have the correct state file already (default: false)
- --reset-priv-val-state Resets data/priv_validator_state.json file [UNSAFE] (default: false)
- --no-service This prevents the genesisd service from being made (default: false)
- --no-start This prevents the genesisd service from starting at the end of the script (default: false)
-```
-
-### Usage
-
-- **Initialization (new validators; generates a new key)**
-
- `sh genesisd.sh init $YOUR_NEW_NODE_NAME`
-
-- **Upgrading (existing validators; you already have an existing .genesisd folder and configuration)**
-
- `sh genesisd.sh upgrade`
-
- _--if you want a different node name you could use `sh genesisd.sh upgrade $YOUR_NEW_NODE_NAME`_
-
- _--more detailed guides for specific upgrades could be found in the [\/genesisd_docs](genesisd_docs/)-folder_
-
-
- ☕ node init/upgrade time is 30-60min or a few tea cups...
+ Cosmos SDK v0.46.15
---
-### Information
+> [!IMPORTANT]
+> **For Full-Node Syncing**
+>
+> If you wish to sync a full node, then you'll have to follow the instructions in the `genesis-evmos` repository first before continuing. This for we were an Evmos-fork before we made the decision to hard fork to Cronos.
-#### Swap
-
-Initializing a node uses quite a bit of memory. The script therefore automatically creates virtual memory (swap) to compensate for the amount it requires to start the node. Currently the script is set to automatically calculate how much RAM + Swap is available. Then, whether the user has enough disk space, creates additional swap to have a total of 150GB available RAM + Swap (Example: if 32GB RAM is unused and 30GB of swap is free, an additional swap of 88GB will be created). These swapfiles are formatted as `genesisd_swapfile_{number}` and are made persistent across reboots by adding a line to the `etc/fstab` file. See the bonus scripts for more info on how to properly add or remove them.
-
-#### Backups
-
-If a `.genesisd` folder already exists, the script will back this up to a folder formatted as `.genesisd_backup_{date_time}`. This is a unique name based on the system's current time. Therefore running the script multiple times will continue to create new backup folders.
-
-Since our state file is large this would mean that it will be around ~14GB every time a backup is made. Make sure to remove older backup folders if you plan on running the script more often (testing purposes for instance). They're hidden folders in the root folder; use `cd ~` then `ls -a` to see them.
-
-## **Other (bonus) scripts**
-
-There are some extra scripts in the `genesisd_scripts` folder, which could be useful later down the line.
-
-### Swap scripts
-
-Since the node requires quite some memory usage, swapfiles are created when you run the genesisd.sh script. To alter these swap files we've included scripts to quickly add or remove genesisd_swapfiles.
-
-- **Adding swap** `sh swap_add.sh `
-
- Example: sh swap_add.sh 50 will create a new genesisd_swapfile that is 50GB in size in '/'.
-
-- **Removing swap** `sh swap_remove.sh `
-
- Example: sh swap_remove.sh /genesisd_swapfile_2 turns off swapfile genesisd_swapfile_2, removes the related line in '/etc/fstab' and deletes /genesisd_swapfile_2.
+## Node requirements
-- **Removing all swaps** `sh swap_remove_all.sh`
+- 300GB+ good hard drive disk
+- 8GB+ RAM
+- 4 CPU Threads
+- Good Internet Connection
- This will turn off all genesis swapfiles, removes all related lines in '/etc/fstab' and deletes all /genesisd_swapfiles
+## Instructions
diff --git a/app/app.go b/app/app.go
index 2322af9e24..ac2b30064e 100644
--- a/app/app.go
+++ b/app/app.go
@@ -211,7 +211,7 @@ func init() {
panic(err)
}
- DefaultNodeHome = filepath.Join(userHomeDir, "."+Name+"d")
+ DefaultNodeHome = filepath.Join(userHomeDir, "."+Name)
sdk.DefaultPowerReduction = sdk.NewIntFromUint64(1000000000000000000)
}
diff --git a/app/upgrades.go b/app/upgrades.go
index a0d7b92e6a..cd3513a325 100644
--- a/app/upgrades.go
+++ b/app/upgrades.go
@@ -8,43 +8,30 @@ import (
sdk "github.com/cosmos/cosmos-sdk/types"
"github.com/cosmos/cosmos-sdk/types/module"
upgradetypes "github.com/cosmos/cosmos-sdk/x/upgrade/types"
- icacontrollertypes "github.com/cosmos/ibc-go/v5/modules/apps/27-interchain-accounts/controller/types"
ibcfeetypes "github.com/cosmos/ibc-go/v5/modules/apps/29-fee/types"
)
func (app *App) RegisterUpgradeHandlers(experimental bool) {
- upgradeHandlerV1 := func(ctx sdk.Context, _ upgradetypes.Plan, fromVM module.VersionMap) (module.VersionMap, error) {
+ // upgrade handlers
+ planName := "plan_cronos"
+ planHandler := func(ctx sdk.Context, _ upgradetypes.Plan, fromVM module.VersionMap) (module.VersionMap, error) {
m, err := app.mm.RunMigrations(ctx, app.configurator, fromVM)
if err != nil {
return m, err
}
// clear extra_eips from evm parameters
// Ref: https://github.com/crypto-org-chain/cronos/issues/755
- params := app.EvmKeeper.GetParams(ctx)
- params.ExtraEIPs = []int64{}
+ evmParams := app.EvmKeeper.GetParams(ctx)
+ evmParams.ExtraEIPs = []int64{}
// fix the incorrect value on testnet parameters
zero := sdkmath.ZeroInt()
- params.ChainConfig.LondonBlock = &zero
+ evmParams.ChainConfig.LondonBlock = &zero
- app.EvmKeeper.SetParams(ctx, params)
+ app.EvmKeeper.SetParams(ctx, evmParams)
return m, nil
}
- // `v1.0.0` upgrade plan will clear the `extra_eips` parameters, and upgrade ibc-go to v5.2.0.
- planName := "v1.0.0"
- app.UpgradeKeeper.SetUpgradeHandler(planName, upgradeHandlerV1)
- // "v1.0.0-testnet3-2" is another coordinated upgrade on testnet3 to upgrade ibc-go to "v5.2.0".
- planNameTestnet3 := "v1.0.0-testnet3-2"
- app.UpgradeKeeper.SetUpgradeHandler(planNameTestnet3, func(ctx sdk.Context, _ upgradetypes.Plan, fromVM module.VersionMap) (module.VersionMap, error) {
- return app.mm.RunMigrations(ctx, app.configurator, fromVM)
- })
-
- gravityPlanName := "v0.8.0-gravity-alpha3"
- if experimental {
- app.UpgradeKeeper.SetUpgradeHandler(gravityPlanName, func(ctx sdk.Context, _ upgradetypes.Plan, fromVM module.VersionMap) (module.VersionMap, error) {
- return app.mm.RunMigrations(ctx, app.configurator, fromVM)
- })
- }
+ app.UpgradeKeeper.SetUpgradeHandler(planName, planHandler)
upgradeInfo, err := app.UpgradeKeeper.ReadUpgradeInfoFromDisk()
if err != nil {
@@ -57,15 +44,6 @@ func (app *App) RegisterUpgradeHandlers(experimental bool) {
Added: []string{ibcfeetypes.StoreKey},
}
- // configure store loader that checks if version == upgradeHeight and applies store upgrades
- app.SetStoreLoader(upgradetypes.UpgradeStoreLoader(upgradeInfo.Height, &storeUpgrades))
- }
- if experimental && upgradeInfo.Name == gravityPlanName {
- storeUpgrades := storetypes.StoreUpgrades{
- Added: []string{ibcfeetypes.StoreKey},
- Deleted: []string{icacontrollertypes.StoreKey},
- }
-
// configure store loader that checks if version == upgradeHeight and applies store upgrades
app.SetStoreLoader(upgradetypes.UpgradeStoreLoader(upgradeInfo.Height, &storeUpgrades))
}
diff --git a/assets/L1.png b/assets/L1.png
new file mode 100644
index 0000000000..bcbb7d2aa4
Binary files /dev/null and b/assets/L1.png differ
diff --git a/assets/cronos.svg b/assets/cronos.svg
deleted file mode 100644
index 76cf3aab70..0000000000
--- a/assets/cronos.svg
+++ /dev/null
@@ -1,22 +0,0 @@
-
diff --git a/assets/genesisl1.png b/assets/genesisl1.png
new file mode 100644
index 0000000000..656508f666
Binary files /dev/null and b/assets/genesisl1.png differ
diff --git a/assets/whitepaper.pdf b/assets/whitepaper.pdf
new file mode 100644
index 0000000000..5ca14dbec6
Binary files /dev/null and b/assets/whitepaper.pdf differ
diff --git a/cmd/cronosd/config/prefix_testnet.go b/cmd/cronosd/config/prefix_testnet.go
index 21dd1e3208..379f909a5f 100644
--- a/cmd/cronosd/config/prefix_testnet.go
+++ b/cmd/cronosd/config/prefix_testnet.go
@@ -7,7 +7,7 @@ import sdk "github.com/cosmos/cosmos-sdk/types"
const (
// Bech32Prefix defines the Bech32 prefix used for Cronos Accounts
- Bech32Prefix = "genesis"
+ Bech32Prefix = "tgenesis"
// Bech32PrefixAccAddr defines the Bech32 prefix of an account's address
Bech32PrefixAccAddr = Bech32Prefix
diff --git a/genesisd_config/default_app.toml b/configs/default_app.toml
similarity index 100%
rename from genesisd_config/default_app.toml
rename to configs/default_app.toml
diff --git a/genesisd_config/default_config.toml b/configs/default_config.toml
similarity index 99%
rename from genesisd_config/default_config.toml
rename to configs/default_config.toml
index 1ac2d1ec0c..336e6bab01 100644
--- a/genesisd_config/default_config.toml
+++ b/configs/default_config.toml
@@ -15,7 +15,7 @@
proxy_app = "tcp://127.0.0.1:26658"
# A custom human readable name for this node
-moniker = ""
+moniker = "mygenesismoniker"
# If this node is many blocks behind the tip of the chain, FastSync
# allows them to catchup quickly by downloading blocks in parallel
diff --git a/genesisd-crisis.service b/genesisd-crisis.service
deleted file mode 100644
index dce100b552..0000000000
--- a/genesisd-crisis.service
+++ /dev/null
@@ -1,15 +0,0 @@
-[Unit]
-Description=genesisd daemon
-After=network.target
-
-[Service]
-Type=simple
-User=root
-WorkingDirectory=/root
-ExecStart=/root/go/bin/genesisd start --x-crisis-skip-assert-invariants --log_level info
-Restart=on-failure
-RestartSec=60
-LimitNOFILE=50000
-
-[Install]
-WantedBy=multi-user.target
diff --git a/genesisd_docs/UPGRADE_29-2_CRONOS.md b/genesisd_docs/UPGRADE_29-2_CRONOS.md
deleted file mode 100644
index 9101acca56..0000000000
--- a/genesisd_docs/UPGRADE_29-2_CRONOS.md
+++ /dev/null
@@ -1,102 +0,0 @@
-# Chain upgrade: genesis_29-2 (Cronos)
-
-This readme is a guide on how to upgrade your node from genesis_29-2 (evmos) to genesis_29-2 (cronos) and what you should be paying attention to.
-
-**IMPORTANT:** Make sure you backup your keys before running the `genesisd.sh` script. Even if it is configured to make a backup of everything, manually doing one yourself is always wise in case anything goes wrong.
-
-Also, for those who come from genesis_29-2 (evmos), do note that this is a different repository than we used before. The old one was named `genesisd`, this one `genesisL1`. Thus don't skip the first steps if you haven't already git cloned the new repository.
-
----
-
-###
1. I am new, I am not a validator yet, but would like to join 🎉
-
-#### Oneliner:
-
-Make sure to replace in the oneliner below with a name of your choice.
-
-```
-cd ~ && git clone https://github.com/alpha-omega-labs/genesisL1.git && cd genesisL1 && sh genesisd.sh init --reset-priv-val-state
-```
-
-#### Or, step-by-step:
-
-1. `cd ~`
-2. `git clone https://github.com/alpha-omega-labs/genesisL1.git`
-3. `cd genesisL1`
-4. `sh genesisd.sh init --reset-priv-val-state`
-
- _replace with a name of your choice_
-
- _the --reset-priv-val-state flag is an extra pre-caution to prevent old values to be used in your new node (if you already had a .genesisd folder)._
-
----
-
-###
2. I am a validator and I NEVER upgraded to the 'cronos' version of GenesisL1 🥱
-
-This means that you still use the `genesisd` repository and not the `genesisL1` repository. If this is the case, then:
-
-#### Oneliner:
-
-```
-cd ~ && git clone https://github.com/alpha-omega-labs/genesisL1.git && cd genesisL1 && sh genesisd.sh upgrade --reset-priv-val-state
-```
-
-#### Or, step-by-step:
-
-1. `cd ~`
-2. `git clone https://github.com/alpha-omega-labs/genesisL1.git`
-3. `cd genesisL1`
-4. `sh genesisd.sh upgrade --reset-priv-val-state`
-
- _in case you want to change your node's name, you could also run sh genesisd.sh upgrade --reset-priv-val-state and replace with a name of your choice._
-
----
-
-###
3. I am a validator and I HAVE upgraded to the 'cronos' version of GenesisL1 😎
-
-#### Oneliner:
-
-```
-cd ~ && rm -r genesisL1 && git clone https://github.com/alpha-omega-labs/genesisL1.git && cd genesisL1 && sh genesisd.sh upgrade --skip-state-download
-```
-
-#### Or, step-by-step:
-
-1. `cd ~`
-2. `rm -r genesisL1`
-3. `git clone https://github.com/alpha-omega-labs/genesisL1.git`
-4. `cd genesisL1`
-5. `sh genesisd.sh upgrade --skip-state-download`
-
- _in case you want to change your node's name, you could also run sh genesisd.sh upgrade --skip-state-download and replace with a name of your choice._
-
- _--skip-state-download is not necessary but, as you already upgraded, you probably already have the 14GB genesis.json state file thus speeding up the process._
-
----
-
-###
4. I am a validator and I HAVE upgraded to the 'cronos' version of GenesisL1, but prefer to upgrade manually 🤓
-
-For advanced users only. You know who you are. Take note of what exactly happens in the oneliner or step-by-step guide. Important to know is that the `priv_validator_state.json` shouldn't date back to when we were at 29-2 (evmos), else you will not be able to participate properly in the consensus. Your `priv_validator_state.json`-file would then point to a block height that's, at the time of writing, in the future (probably to 6751398 or 6751399). If you're one of these people then you should skip the backup and restore of the `priv_validator_state.json`-file in the commands below.
-
-_The commands below don't take care of this for it's too user-specific, but make sure that your config.toml and app.toml are up-to-date. If you participated in the cronos upgrade and already copied over the config files in the `/genesisd_config/` folder or used the `genesisd.sh` script back then, then you're good, else you should check the folder to see what the config files are supposed to look like. Do not forget to restore your moniker and any other settings you had if you end up using these pre-configured files._
-
-#### Oneliner:
-
-```
-cd ~ && rm -r genesisL1 && git clone https://github.com/alpha-omega-labs/genesisL1.git && service genesisd stop && cd genesisL1 && go mod tidy && make install && cd ~/.genesisd && cp ./data/priv_validator_state.json ./priv_validator_state.json && genesisd tendermint unsafe-reset-all && mv ./priv_validator_state.json ./data/priv_validator_state.json && service genesisd start
-```
-
-#### Or, step-by-step:
-
-1. `cd ~`
-2. `rm -r genesisL1`
-3. `git clone https://github.com/alpha-omega-labs/genesisL1.git`
-4. `service genesisd stop`
-5. `cd genesisL1`
-6. `go mod tidy`
-7. `make install`
-8. `cd ~/.genesisd`
-9. `cp ./data/priv_validator_state.json ./priv_validator_state.json`
-10. `genesisd tendermint unsafe-reset-all`
-12. `mv ./priv_validator_state.json ./data/priv_validator_state.json`
-13. `service genesisd start`
diff --git a/genesisd_scripts/swap_add.sh b/genesisd_scripts/swap_add.sh
deleted file mode 100644
index ec0ee57ebf..0000000000
--- a/genesisd_scripts/swap_add.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-
-if [ "$#" -ne 1 ]; then
- echo "Usage: $0 "
- echo " should be the desired size of the swap file in gigabytes (GB)."
- exit 1
-fi
-
-swap_size_in_gb="$1"
-
-# Validate that the argument is a positive integer
-if ! expr "$swap_size_in_gb" : '^[0-9]\+$' > /dev/null; then
- echo "Error: must be a positive integer."
- exit 1
-fi
-
-available_disk_gb=$(df -BG --output=avail / | awk 'NR==2 {print $1}' | tr -d 'G')
-if [ "$available_disk_gb" -lt "$((swap_size_in_gb))" ]; then
- echo "Sorry, you don't have enough space."
- exit 1
-fi
-
-echo "Adding ${swap_size_in_gb}GB of swap space..."
-
-# Find a suitable name for the new swap file
-index=2
-new_swapfile="/genesisd_swapfile"
-while [ -e $new_swapfile ]; do
- new_swapfile="/genesisd_swapfile_$index"
- index=$((index + 1))
-done
-
-# Create new swap file
-fallocate -l ${swap_size_in_gb}G $new_swapfile
-chmod 600 $new_swapfile
-mkswap $new_swapfile
-swapon $new_swapfile
-
-echo "Additional ${swap_size_in_gb}GB of swap space added in $new_swapfile."
-
-# Add entry to /etc/fstab to make swapfile persistent
-line="$new_swapfile none swap sw 0 0"
-file=/etc/fstab
-if ! grep -qF "$line" "$file"; then
- echo "$line" | sudo tee -a "$file" > /dev/null
- echo "Line '$line' added to $file."
-else
- echo "Line '$line' already exists in $file."
-fi
diff --git a/genesisd_scripts/swap_remove.sh b/genesisd_scripts/swap_remove.sh
deleted file mode 100644
index 1294b8bcca..0000000000
--- a/genesisd_scripts/swap_remove.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash
-
-# Check if an argument is provided
-if [ "$#" -ne 1 ]; then
- echo "Usage: $0 "
- echo "