redsocks.conf.example

base {
	// debug: connection progress & client list on SIGUSR1
	log_debug = off;

	// info: start and end of client session
	log_info = on;

	/* possible `log' values are:
	 *   stderr
	 *   "file:/path/to/file"
	 *   syslog:FACILITY  facility is any of "daemon", "local0"..."local7"
	 */
	log = stderr;
	// log = "file:/path/to/file";
	// log = "syslog:local7";

	// detach from console
	daemon = off;

	/* Change uid, gid and root directory, these options require root
	 * privilegies on startup.
	 * Note, your chroot may requre /etc/localtime if you write log to syslog.
	 * Log is opened before chroot & uid changing.
	 * Debian, Ubuntu and some other distributions use `nogroup` instead of
	 * `nobody`, so change it according to your system if you want redsocks
	 * to drop root privileges.
	 */
	// user = nobody;
	// group = nobody;
	// chroot = "/var/chroot";

	/* possible `redirector' values are:
	 *   iptables   - for Linux
	 *   ipf        - for FreeBSD
	 *   pf         - for OpenBSD
	 *   generic    - some generic redirector that MAY work
	 */
	redirector = iptables;

	/* Override per-socket values for TCP_KEEPIDLE, TCP_KEEPCNT,
	 * and TCP_KEEPINTVL. see man 7 tcp for details.
	 * `redsocks' relies on SO_KEEPALIVE option heavily. */
	//tcp_keepalive_time = 0;
	//tcp_keepalive_probes = 0;
	//tcp_keepalive_intvl = 0;

	/* Enable or disable Linux 3.9+ specific socket option SO_REUSEPORT.
	 * Some older versions of Linux like CentOS 6.5 (Kernel 2.6.32) also
	 # support this option.
	 * Default to off.
	 */
	reuseport = off;
}

redsocks {
	/* `local_ip' defaults to 127.0.0.1 for security reasons,
	 * use 0.0.0.0 if you want to listen on every interface.
	 * `local_*' are used as port to redirect to.
	 */
	local_ip = 127.0.0.1;
	local_port = 12345;

	// listen() queue length. Default value is SOMAXCONN and it should be
	// good enough for most of us.
	// listenq = 128; // SOMAXCONN equals 128 on my Linux box.

	// `max_accept_backoff` is a delay to retry `accept()` after accept
	// failure (e.g. due to lack of file descriptors). It's measured in
	// milliseconds and maximal value is 65535. `min_accept_backoff` is
	// used as initial backoff value and as a damper for `accept() after
	// close()` logic.
	// min_accept_backoff = 100;
	// max_accept_backoff = 60000;

	// `ip' and `port' are IP and tcp-port of proxy-server
	// You can also use hostname instead of IP, only one (random)
	// address of multihomed host will be used.
	// The two fields are meaningless when proxy type is 'direct'.
	ip = example.org;
	port = 1080;

	// known types: socks4, socks5, http-connect, http-relay
	// New types: direct, shadowsocks, https-connect
	type = socks5;

	// Specify interface for outgoing connections.
	// This is useful when you have multiple connections to
	// internet or when you have VPN connections.
	// interface = tun0;

	// Change this parameter to 1 if you want auto proxy feature. 
	// When autoproxy is set to non-zero, the connection to target
	// will be made directly first. If direct connection to target
	// fails for timeout/connection refuse, redsocks will try to
	// connect to target via the proxy.
	autoproxy = 0;
	// timeout is meaningful when 'autoproxy' is non-zero.
	// It specified timeout value when trying to connect to destination
	// directly. Default is 10 seconds. When it is set to 0, default
	// timeout value will be used.
	timeout = 10;

	// login = "foobar";// field 'login' is reused as encryption
					   // method of shadowsocks
	// password = "baz";
}

redudp {
	// `local_ip' should not be 0.0.0.0 as it's also used for outgoing
	// packets that are sent as replies - and it should be fixed
	// if we want NAT to work properly.
	local_ip = 127.0.0.1;
	local_port = 10053;

	// `ip' and `port' of socks5 proxy server.
	ip = 10.0.0.1;
	port = 1080;
	login = username;// field 'login' is reused as encryption
					   // method of shadowsocks
	password = pazzw0rd;

	// know types: socks5, shadowsocks
	type = socks5;

	// redsocks knows about two options while redirecting UDP packets at
	// linux: TPROXY and REDIRECT.  TPROXY requires more complex routing
	// configuration and fresh kernel (>= 2.6.37 according to squid
	// developers[1]) but has hack-free way to get original destination
	// address, REDIRECT is easier to configure, but requires `dest_ip` and
	// `dest_port` to be set, limiting packet redirection to single
	// destination.
	// [1] http://wiki.squid-cache.org/Features/Tproxy4
	dest_ip = 8.8.8.8;
	dest_port = 53;

	// Do not set it large if this section is for DNS requests. Otherwise,
	// you may encounter out of file descriptor problem. For DNS requests,
	// 10s is adequate.
	udp_timeout = 30;
	// udp_timeout_stream = 180;
}

tcpdns {
	// Transform UDP DNS requests into TCP DNS requests.
	// You can also redirect connections to external TCP DNS server to
	// REDSOCKS transparent proxy via iptables.
	local_ip = 192.168.1.1; // Local server to act as DNS server
	local_port = 1053;      // UDP port to receive UDP DNS requests
	tcpdns1 = 8.8.4.4;      // DNS server that supports TCP DNS requests
	tcpdns1_port = 53;      // DNS server port, default 53
	tcpdns2 = 8.8.8.8;      // DNS server that supports TCP DNS requests
	tcpdns2_port = 53;      // DNS server port, default 53
	timeout = 4;            // Timeout value for TCP DNS requests
}

autoproxy {
    // Specify interface for outgoing connections.
    // This is useful when you have multiple connections to
    // internet or when you have VPN connections.
    // interface = wlan0;

    no_quick_check_seconds = 60; // Directly relay traffic to proxy if an IP
                                 // is found blocked in cache and it has been
                                 // added into cache no earlier than this
                                 // specified number of seconds.
                                 // Set it to 0 if you do not want to perform
                                 // quick check when an IP is found in blocked
                                 // IP cache, thus the connection will be
                                 // redirected to proxy immediately.
    quick_connect_timeout = 3;   // Timeout value when performing quick
                                 // connection check if an IP is found blocked
                                 // in cache.
}

ipcache {
    // Configure IP cache
    cache_size = 4;   // Maximum number of IP's in 1K. 
    stale_time = 900; // Seconds to stale an IP in cache since it is added
                      // into cahce.
                      // Set it to 0 to disable cache stale.
    port_check = 1;   // Whether to distinguish port number in address
    cache_file = "/tmp/ipcache.txt"; // File used to store blocked IP's in cache.
    autosave_interval = 3600; // Interval for saving ip cache into file.
                              // Set it to 0 to disable autosave.
    // When autosave_interval and stale_time are both 0, IP cache behaves like
    // a static blacklist. 
}

// you can add more `redsocks' and `redudp' sections if you need.