Modbus Power Control Cycling Enabled Power Control/Disabled

[cncservsys]

So I have the integration working well on Solax X1 Hybrid G4 inverter. Automations all working nicely. However, I recently noticed that the Modbus Power Control sensor was cycling every 20 Seconds between 'Enabled Power Control' & 'Disabled'. This affects battery charging & discharging. I have now found what appears to be causing this behavior on my system. It is the Inverter setting 'Pgrid Bios'. If set to 'Inverter', this seems to cause this to occur . It does not happen if the setting is 'Disabled. I mention this as it may help others seeing this occuring.