diff --git a/fault_injection/configs/chip_test.yaml b/fault_injection/configs/chip_test.yaml
new file mode 100644
index 00000000..74577bcf
--- /dev/null
+++ b/fault_injection/configs/chip_test.yaml
@@ -0,0 +1,51 @@
+target:
+  target_type: chip
+  fw_bin: "../objs/sca_ujson_chip_signed.img"
+  output_len_bytes: 16
+  target_clk_mult: 1
+  target_freq: 100000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyUSB1"
+  usb_serial: "205F355C3236"
+fisetup:
+  fi_gear: "dummy"
+  fi_type: "voltage_glitch"
+  # Parameter generation.
+  parameter_generation: "random"
+  # Number of randomized iterations for the parameter sweep.
+  # For parameter_generation: "random", this is the number of iterations.
+  # For parameter_generation: "deterministic", this is the number of iterations
+  # per fixed parameter.
+  num_iterations: 100
+  # Voltage glitch width in ns.
+  glitch_voltage_min: 2.7
+  glitch_voltage_max: 3.3
+  glitch_voltage_step: 0.05
+  # Voltage glitch width in ns.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in ns.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "otbn_char_unrolled_reg_op_loop"
+  expected_result: '{"loop_counter":100,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.address_translation.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.address_translation.cw310.yaml
new file mode 100644
index 00000000..f64c474a
--- /dev/null
+++ b/fault_injection/configs/pen.global_fi.ibex.address_translation.cw310.yaml
@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_address_translation"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.address_translation_config.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.address_translation_config.cw310.yaml
new file mode 100644
index 00000000..729ab02d
--- /dev/null
+++ b/fault_injection/configs/pen.global_fi.ibex.address_translation_config.cw310.yaml
@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_address_translation_config"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.conditional_branch.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.conditional_branch.cw310.yaml
index 95c40342..f604c503 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.conditional_branch.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.conditional_branch.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_conditional_branch"
-  expected_result: '{"result1":10001,"result2":0,"err_status":0}'
+  expected_result: '{"result1":10001,"result2":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.csr_read.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.csr_read.cw310.yaml
new file mode 100644
index 00000000..272d37e3
--- /dev/null
+++ b/fault_injection/configs/pen.global_fi.ibex.char.csr_read.cw310.yaml
@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_char_csr_read"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.csr_write.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.csr_write.cw310.yaml
new file mode 100644
index 00000000..09729992
--- /dev/null
+++ b/fault_injection/configs/pen.global_fi.ibex.char.csr_write.cw310.yaml
@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_char_csr_write"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.flash_read.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.flash_read.cw310.yaml
index 06b8d799..912a87cd 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.flash_read.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.flash_read.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_flash_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.flash_write.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.flash_write.cw310.yaml
index 09d52f9f..ab9975b4 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.flash_write.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.flash_write.cw310.yaml
@@ -36,4 +36,10 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_flash_write"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
+  
\ No newline at end of file
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.register_file.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.register_file.cw310.yaml
index c1e2dff3..941cc798 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.register_file.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.register_file.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_register_file"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.register_file_read.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.register_file_read.cw310.yaml
index b03bd43e..77775447 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.register_file_read.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.register_file_read.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_register_file_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.sram_read.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.sram_read.cw310.yaml
index ed1421f2..72a8b242 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.sram_read.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.sram_read.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_sram_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.sram_write.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.sram_write.cw310.yaml
index e5aebd65..d14f4734 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.sram_write.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.sram_write.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_sram_write"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.ibex.char.unconditional_branch.cw310.yaml b/fault_injection/configs/pen.global_fi.ibex.char.unconditional_branch.cw310.yaml
index 95fda6f7..6ecc86a2 100644
--- a/fault_injection/configs/pen.global_fi.ibex.char.unconditional_branch.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.ibex.char.unconditional_branch.cw310.yaml
@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_unconditional_branch"
-  expected_result: '{"result":100,"err_status":0}'
+  expected_result: '{"result":100,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.otbn.key_sideload.cw310.yaml b/fault_injection/configs/pen.global_fi.otbn.key_sideload.cw310.yaml
index 75470dc7..b568122d 100644
--- a/fault_injection/configs/pen.global_fi.otbn.key_sideload.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.otbn.key_sideload.cw310.yaml
@@ -35,4 +35,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "otbn_key_sideload"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
diff --git a/fault_injection/configs/pen.global_fi.otbn.load_integrity.cw310.yaml b/fault_injection/configs/pen.global_fi.otbn.load_integrity.cw310.yaml
index 2c0af6bb..58cce937 100644
--- a/fault_injection/configs/pen.global_fi.otbn.load_integrity.cw310.yaml
+++ b/fault_injection/configs/pen.global_fi.otbn.load_integrity.cw310.yaml
@@ -35,4 +35,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "otbn_load_integrity"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
\ No newline at end of file
diff --git a/fault_injection/fi_ibex.py b/fault_injection/fi_ibex.py
index d9558001..4645e385 100755
--- a/fault_injection/fi_ibex.py
+++ b/fault_injection/fi_ibex.py
@@ -122,28 +122,8 @@ def fi_parameter_sweep(cfg: dict, target: Target, fi_gear,
             response_compare = response
             expected_response = cfg["test"]["expected_result"]
 
-            # If the test decides to ignore alerts triggered by the alert
-            # handler, remove it from the received and expected response.
-            # In the database, the received alert is still available for
-            # further diagnosis.
-            if cfg["test"]["ignore_alerts"]:
-                resp_json = json.loads(response_compare)
-                exp_json = json.loads(expected_response)
-                if "alerts" in resp_json:
-                    del resp_json["alerts"]
-                    response_compare = json.dumps(resp_json)
-                if "alerts" in exp_json:
-                    del exp_json["alerts"]
-                    expected_response = json.dumps(exp_json)
-
             # Compare response.
-            # Check if result is expected result (FI failed), unexpected result
-            # (FI successful), or no response (FI failed.)
-            fi_result = FISuccess.SUCCESS
-            if response_compare == expected_response:
-                # Expected result received. No FI effect.
-                fi_result = FISuccess.EXPRESPONSE
-            elif response == "":
+            if response_compare == "":
                 # No UART response received.
                 fi_result = FISuccess.NORESPONSE
                 # Resetting OT as it most likely crashed.
@@ -154,6 +134,29 @@ def fi_parameter_sweep(cfg: dict, target: Target, fi_gear,
                 ot_communication.init()
                 # Reset FIGear if necessary.
                 fi_gear.reset()
+            else:
+                # If the test decides to ignore alerts triggered by the alert
+                # handler, remove it from the received and expected response.
+                # In the database, the received alert is still available for
+                # further diagnosis.
+                if cfg["test"]["ignore_alerts"]:
+                    resp_json = json.loads(response_compare)
+                    exp_json = json.loads(expected_response)
+                    if "alerts" in resp_json:
+                        del resp_json["alerts"]
+                        response_compare = json.dumps(resp_json,
+                                                      separators=(',', ':'))
+                    if "alerts" in exp_json:
+                        del exp_json["alerts"]
+                        expected_response = json.dumps(exp_json,
+                                                       separators=(',', ':'))
+
+                # Check if result is expected result (FI failed), unexpected result
+                # (FI successful), or no response (FI failed.)
+                fi_result = FISuccess.SUCCESS
+                if response_compare == expected_response:
+                    # Expected result received. No FI effect.
+                    fi_result = FISuccess.EXPRESPONSE
 
             # Store result into FIProject.
             project.append_firesult(
diff --git a/fault_injection/fi_otbn.py b/fault_injection/fi_otbn.py
index 28ea1403..cef52854 100755
--- a/fault_injection/fi_otbn.py
+++ b/fault_injection/fi_otbn.py
@@ -47,7 +47,8 @@ def setup(cfg: dict, project: Path):
         force_program_bitstream = cfg["target"].get("force_program_bitstream"),
         baudrate = cfg["target"].get("baudrate"),
         port = cfg["target"].get("port"),
-        output_len = cfg["target"].get("output_len_bytes")
+        output_len = cfg["target"].get("output_len_bytes"),
+        usb_serial = cfg["target"].get("usb_serial")
     )
     target = Target(target_cfg)
 
@@ -121,28 +122,8 @@ def fi_parameter_sweep(cfg: dict, target: Target, fi_gear,
             response_compare = response
             expected_response = cfg["test"]["expected_result"]
 
-            # If the test decides to ignore alerts triggered by the alert
-            # handler, remove it from the received and expected response.
-            # In the database, the received alert is still available for
-            # further diagnosis.
-            if cfg["test"]["ignore_alerts"]:
-                resp_json = json.loads(response_compare)
-                exp_json = json.loads(expected_response)
-                if "alerts" in resp_json:
-                    del resp_json["alerts"]
-                    response_compare = json.dumps(resp_json)
-                if "alerts" in exp_json:
-                    del exp_json["alerts"]
-                    expected_response = json.dumps(exp_json)
-
             # Compare response.
-            # Check if result is expected result (FI failed), unexpected result
-            # (FI successful), or no response (FI failed.)
-            fi_result = FISuccess.SUCCESS
-            if response_compare == expected_response:
-                # Expected result received. No FI effect.
-                fi_result = FISuccess.EXPRESPONSE
-            elif response == "":
+            if response_compare == "":
                 # No UART response received.
                 fi_result = FISuccess.NORESPONSE
                 # Resetting OT as it most likely crashed.
@@ -155,6 +136,29 @@ def fi_parameter_sweep(cfg: dict, target: Target, fi_gear,
                 ot_communication.init()
                 # Reset FIGear if necessary.
                 fi_gear.reset()
+            else:
+                # If the test decides to ignore alerts triggered by the alert
+                # handler, remove it from the received and expected response.
+                # In the database, the received alert is still available for
+                # further diagnosis.
+                if cfg["test"]["ignore_alerts"]:
+                    resp_json = json.loads(response_compare)
+                    exp_json = json.loads(expected_response)
+                    if "alerts" in resp_json:
+                        del resp_json["alerts"]
+                        response_compare = json.dumps(resp_json,
+                                                      separators=(',', ':'))
+                    if "alerts" in exp_json:
+                        del exp_json["alerts"]
+                        expected_response = json.dumps(exp_json,
+                                                       separators=(',', ':'))
+
+                # Check if result is expected result (FI failed), unexpected result
+                # (FI successful), or no response (FI failed.)
+                fi_result = FISuccess.SUCCESS
+                if response_compare == expected_response:
+                    # Expected result received. No FI effect.
+                    fi_result = FISuccess.EXPRESPONSE
 
             # Store result into FIProject.
             project.append_firesult(
diff --git a/objs/sca_ujson_fpga_cw310.bin b/objs/sca_ujson_fpga_cw310.bin
old mode 100644
new mode 100755
index 8cd9d23f..beac4491
Binary files a/objs/sca_ujson_fpga_cw310.bin and b/objs/sca_ujson_fpga_cw310.bin differ
diff --git a/target/communication/fi_ibex_commands.py b/target/communication/fi_ibex_commands.py
index ecb12374..e693e06e 100644
--- a/target/communication/fi_ibex_commands.py
+++ b/target/communication/fi_ibex_commands.py
@@ -149,6 +149,42 @@ def start_test(self, cfg: dict) -> None:
         test_function = getattr(self, cfg["test"]["which_test"])
         test_function()
 
+    def ibex_char_csr_write(self) -> None:
+        """ Starts the ibex.fi.char.csr_write test.
+        """
+        # IbexFi command.
+        self._ujson_ibex_fi_cmd()
+        # CharCsrWrite command.
+        time.sleep(0.01)
+        self.target.write(json.dumps("CharCsrWrite").encode("ascii"))
+
+    def ibex_char_csr_read(self) -> None:
+        """ Starts the ibex.fi.char.csr_read test.
+        """
+        # IbexFi command.
+        self._ujson_ibex_fi_cmd()
+        # CharCsrRead command.
+        time.sleep(0.01)
+        self.target.write(json.dumps("CharCsrRead").encode("ascii"))
+
+    def ibex_address_translation_config(self) -> None:
+        """ Starts the ibex.fi.address_translation_config test.
+        """
+        # IbexFi command.
+        self._ujson_ibex_fi_cmd()
+        # AddressTranslationCfg command.
+        time.sleep(0.01)
+        self.target.write(json.dumps("AddressTranslationCfg").encode("ascii"))
+
+    def ibex_address_translation(self) -> None:
+        """ Starts the ibex.fi.address_translation test.
+        """
+        # IbexFi command.
+        self._ujson_ibex_fi_cmd()
+        # AddressTranslation command.
+        time.sleep(0.01)
+        self.target.write(json.dumps("AddressTranslation").encode("ascii"))
+
     def read_response(self, max_tries: Optional[int] = 1) -> str:
         """ Read response from Ibex FI framework.
         Args: