From fe3aa90f6f2ddb8f5403666efa5811f96e2e9b47 Mon Sep 17 00:00:00 2001 From: Ben Spencer Date: Mon, 21 Nov 2022 11:45:22 -0700 Subject: [PATCH] Remove deprecated syntax in tests ref #318 --- .../asr_validation/wald2017b/analysis/A1-biaxial.i | 12 ++++++------ .../wald2017b/analysis/A1-triaxial.i | 12 ++++++------ .../wald2017b/analysis/A1-uniaxial.i | 12 ++++++------ .../wald2017b/analysis/A1-unreinforced.i | 14 ++++++-------- .../asr_validation/wald2017b/analysis/A3-biaxial.i | 12 ++++++------ test/tests/concrete_ASR_swelling/asr_confined.i | 5 +---- .../concrete_moisture_heat_transfer/maqbeth_1d.i | 2 +- .../power_law_creep/nafems_test5a_lim.i | 2 -- .../power_law_creep/nafems_test5a_lim_neml.i | 2 -- .../neml_stochasticSimple/stochastic_driver.i | 4 +--- 10 files changed, 33 insertions(+), 44 deletions(-) diff --git a/assessment/asr_validation/wald2017b/analysis/A1-biaxial.i b/assessment/asr_validation/wald2017b/analysis/A1-biaxial.i index 74ea5b56e..bd76537e4 100644 --- a/assessment/asr_validation/wald2017b/analysis/A1-biaxial.i +++ b/assessment/asr_validation/wald2017b/analysis/A1-biaxial.i @@ -469,24 +469,24 @@ block = 1 # setup thermal property models and parameters # options available: CONSTANT ASCE-1992 KODUR-2004 EUROCODE-2004 KIM-2003 - thermal_conductivity_model = KODUR-2004 - thermal_capacity_model = KODUR-2004 + thermal_model = KODUR-2004 aggregate_type = Siliceous #options: Siliceous Carbonate - ref_density_of_concrete = 2231.0 # in kg/m^3 - ref_specific_heat_of_concrete = 1100.0 # in J/(Kg.0C) - ref_thermal_conductivity_of_concrete = 3 # in W/(m.0C) + ref_density = 2231.0 # in kg/m^3 + ref_specific_heat = 1100.0 # in J/(Kg.0C) + ref_thermal_conductivity = 3 # in W/(m.0C) # setup moisture capacity and humidity diffusivity models aggregate_pore_type = dense #options: dense porous aggregate_mass = 1877.0 #mass of aggregate (kg) per m^3 of concrete + aggregate_vol_fraction = 0.7 cement_type = 1 #options: 1 2 3 4 cement_mass = 354.0 #mass of cement (kg) per m^3 of concrete water_to_cement_ratio = 0.5 concrete_cure_time = 28.0 #curing time in (days) # options available for humidity diffusivity: - moisture_diffusivity_model = Xi #options: Bazant Mensi + moisture_model = Xi #options: Bazant Mensi D1 = 3.0e-8 coupled_moisture_diffusivity_factor = 1.0e-2 # factor for mositure diffusivity due to heat diff --git a/assessment/asr_validation/wald2017b/analysis/A1-triaxial.i b/assessment/asr_validation/wald2017b/analysis/A1-triaxial.i index 91ce74f0e..0158c9686 100644 --- a/assessment/asr_validation/wald2017b/analysis/A1-triaxial.i +++ b/assessment/asr_validation/wald2017b/analysis/A1-triaxial.i @@ -509,24 +509,24 @@ block = 1 # setup thermal property models and parameters # options available: CONSTANT ASCE-1992 KODUR-2004 EUROCODE-2004 KIM-2003 - thermal_conductivity_model = KODUR-2004 - thermal_capacity_model = KODUR-2004 + thermal_model = KODUR-2004 aggregate_type = Siliceous #options: Siliceous Carbonate - ref_density_of_concrete = 2231.0 # in kg/m^3 - ref_specific_heat_of_concrete = 1100.0 # in J/(Kg.0C) - ref_thermal_conductivity_of_concrete = 3 # in W/(m.0C) + ref_density = 2231.0 # in kg/m^3 + ref_specific_heat = 1100.0 # in J/(Kg.0C) + ref_thermal_conductivity = 3 # in W/(m.0C) # setup moisture capacity and humidity diffusivity models aggregate_pore_type = dense #options: dense porous aggregate_mass = 1877.0 #mass of aggregate (kg) per m^3 of concrete + aggregate_vol_fraction = 0.7 cement_type = 1 #options: 1 2 3 4 cement_mass = 354.0 #mass of cement (kg) per m^3 of concrete water_to_cement_ratio = 0.5 concrete_cure_time = 28.0 #curing time in (days) # options available for humidity diffusivity: - moisture_diffusivity_model = Xi #options: Bazant Mensi + moisture_model = Xi #options: Bazant Mensi D1 = 3.0e-8 coupled_moisture_diffusivity_factor = 1.0e-2 # factor for mositure diffusivity due to heat diff --git a/assessment/asr_validation/wald2017b/analysis/A1-uniaxial.i b/assessment/asr_validation/wald2017b/analysis/A1-uniaxial.i index 9c2089416..fd3e3f070 100644 --- a/assessment/asr_validation/wald2017b/analysis/A1-uniaxial.i +++ b/assessment/asr_validation/wald2017b/analysis/A1-uniaxial.i @@ -425,24 +425,24 @@ block = 1 # setup thermal property models and parameters # options available: CONSTANT ASCE-1992 KODUR-2004 EUROCODE-2004 KIM-2003 - thermal_conductivity_model = KODUR-2004 - thermal_capacity_model = KODUR-2004 + thermal_model = KODUR-2004 aggregate_type = Siliceous #options: Siliceous Carbonate - ref_density_of_concrete = 2231.0 # in kg/m^3 - ref_specific_heat_of_concrete = 1100.0 # in J/(Kg.0C) - ref_thermal_conductivity_of_concrete = 3 # in W/(m.0C) + ref_density = 2231.0 # in kg/m^3 + ref_specific_heat = 1100.0 # in J/(Kg.0C) + ref_thermal_conductivity = 3 # in W/(m.0C) # setup moisture capacity and humidity diffusivity models aggregate_pore_type = dense #options: dense porous aggregate_mass = 1877.0 #mass of aggregate (kg) per m^3 of concrete + aggregate_vol_fraction = 0.7 cement_type = 1 #options: 1 2 3 4 cement_mass = 354.0 #mass of cement (kg) per m^3 of concrete water_to_cement_ratio = 0.5 concrete_cure_time = 28.0 #curing time in (days) # options available for humidity diffusivity: - moisture_diffusivity_model = Xi #options: Bazant Mensi + moisture_model = Xi #options: Bazant Mensi D1 = 3.0e-8 coupled_moisture_diffusivity_factor = 1.0e-2 # factor for mositure diffusivity due to heat diff --git a/assessment/asr_validation/wald2017b/analysis/A1-unreinforced.i b/assessment/asr_validation/wald2017b/analysis/A1-unreinforced.i index 0711c849b..1c9828b43 100644 --- a/assessment/asr_validation/wald2017b/analysis/A1-unreinforced.i +++ b/assessment/asr_validation/wald2017b/analysis/A1-unreinforced.i @@ -1,6 +1,5 @@ [GlobalParams] displacements = 'disp_x disp_y disp_z' - block = 1 [] [Problem] @@ -20,7 +19,6 @@ [] [rh] initial_condition = 0.8 - block = 1 [] [] @@ -282,24 +280,24 @@ type = ConcreteThermalMoisture # setup thermal property models and parameters # options available: CONSTANT ASCE-1992 KODUR-2004 EUROCODE-2004 KIM-2003 - thermal_conductivity_model = KODUR-2004 - thermal_capacity_model = KODUR-2004 + thermal_model = KODUR-2004 aggregate_type = Siliceous #options: Siliceous Carbonate - ref_density_of_concrete = 2231.0 # in kg/m^3 - ref_specific_heat_of_concrete = 1100.0 # in J/(Kg.0C) - ref_thermal_conductivity_of_concrete = 3 # in W/(m.0C) + ref_density = 2231.0 # in kg/m^3 + ref_specific_heat = 1100.0 # in J/(Kg.0C) + ref_thermal_conductivity = 3 # in W/(m.0C) # setup moisture capacity and humidity diffusivity models aggregate_pore_type = dense #options: dense porous aggregate_mass = 1877.0 #mass of aggregate (kg) per m^3 of concrete + aggregate_vol_fraction = 0.7 cement_type = 1 #options: 1 2 3 4 cement_mass = 354.0 #mass of cement (kg) per m^3 of concrete water_to_cement_ratio = 0.5 concrete_cure_time = 28.0 #curing time in (days) # options available for humidity diffusivity: - moisture_diffusivity_model = Xi #options: Bazant Mensi + moisture_model = Xi #options: Bazant Mensi D1 = 3.0e-8 coupled_moisture_diffusivity_factor = 1.0e-2 # factor for mositure diffusivity due to heat diff --git a/assessment/asr_validation/wald2017b/analysis/A3-biaxial.i b/assessment/asr_validation/wald2017b/analysis/A3-biaxial.i index ffc462983..856d1cf9f 100644 --- a/assessment/asr_validation/wald2017b/analysis/A3-biaxial.i +++ b/assessment/asr_validation/wald2017b/analysis/A3-biaxial.i @@ -468,24 +468,24 @@ block = 1 # setup thermal property models and parameters # options available: CONSTANT ASCE-1992 KODUR-2004 EUROCODE-2004 KIM-2003 - thermal_conductivity_model = KODUR-2004 - thermal_capacity_model = KODUR-2004 + thermal_model = KODUR-2004 aggregate_type = Siliceous #options: Siliceous Carbonate - ref_density_of_concrete = 2231.0 # in kg/m^3 - ref_specific_heat_of_concrete = 1100.0 # in J/(Kg.0C) - ref_thermal_conductivity_of_concrete = 3 # in W/(m.0C) + ref_density = 2231.0 # in kg/m^3 + ref_specific_heat = 1100.0 # in J/(Kg.0C) + ref_thermal_conductivity = 3 # in W/(m.0C) # setup moisture capacity and humidity diffusivity models aggregate_pore_type = dense #options: dense porous aggregate_mass = 1877.0 #mass of aggregate (kg) per m^3 of concrete + aggregate_vol_fraction = 0.7 cement_type = 1 #options: 1 2 3 4 cement_mass = 354.0 #mass of cement (kg) per m^3 of concrete water_to_cement_ratio = 0.5 concrete_cure_time = 28.0 #curing time in (days) # options available for humidity diffusivity: - moisture_diffusivity_model = Xi #options: Bazant Mensi + moisture_model = Xi #options: Bazant Mensi D1 = 3.0e-8 coupled_moisture_diffusivity_factor = 1.0e-2 # factor for mositure diffusivity due to heat diff --git a/test/tests/concrete_ASR_swelling/asr_confined.i b/test/tests/concrete_ASR_swelling/asr_confined.i index 43af229be..5560ce4a1 100644 --- a/test/tests/concrete_ASR_swelling/asr_confined.i +++ b/test/tests/concrete_ASR_swelling/asr_confined.i @@ -3,12 +3,9 @@ volumetric_locking_correction = true [] -[Problem] - coord_type = RZ -[] - [Mesh] file = mesh_contact_strip.e + coord_type = RZ [] [Preconditioning] diff --git a/test/tests/concrete_moisture_heat_transfer/maqbeth_1d.i b/test/tests/concrete_moisture_heat_transfer/maqbeth_1d.i index 087cbcef8..01f4b3af2 100644 --- a/test/tests/concrete_moisture_heat_transfer/maqbeth_1d.i +++ b/test/tests/concrete_moisture_heat_transfer/maqbeth_1d.i @@ -2,12 +2,12 @@ type = ReferenceResidualProblem reference_vector = 'ref' extra_tag_vectors = 'ref' - coord_type = RZ [] [Mesh] file = maqbeth_1d.e construct_side_list_from_node_list = true + coord_type = RZ [] [Functions] diff --git a/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim.i b/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim.i index 6e92cf505..08e8bc722 100644 --- a/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim.i +++ b/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim.i @@ -62,14 +62,12 @@ type = Pressure variable = disp_y boundary = top - component = 1 factor = -100.0 [../] [./side_press] type = Pressure variable = disp_x boundary = right - component = 0 factor = -200.0 [../] [] diff --git a/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim_neml.i b/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim_neml.i index 1dd81e266..50310ce8a 100644 --- a/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim_neml.i +++ b/test/tests/neml_benchmark/power_law_creep/nafems_test5a_lim_neml.i @@ -47,14 +47,12 @@ type = Pressure variable = disp_y boundary = top - component = 1 factor = -100.0 [../] [./side_press] type = Pressure variable = disp_x boundary = right - component = 0 factor = -200.0 [../] [] diff --git a/test/tests/neml_stochasticSimple/stochastic_driver.i b/test/tests/neml_stochasticSimple/stochastic_driver.i index f350f4283..774211d12 100644 --- a/test/tests/neml_stochasticSimple/stochastic_driver.i +++ b/test/tests/neml_stochasticSimple/stochastic_driver.i @@ -71,12 +71,10 @@ [Controls] [cmdLine] - type = MultiAppCommandLineControl + type = MultiAppSamplerControl multi_app = sub sampler = neml_values - param_names='Materials/stress/neml_variable_value[0,1]' - [] []