Skip to content
This repository has been archived by the owner on Jun 25, 2024. It is now read-only.

Latest commit

 

History

History
368 lines (301 loc) · 17.3 KB

recovery.md

File metadata and controls

368 lines (301 loc) · 17.3 KB
Raw

Table of Contents

Recovering Funds From lnd (funds are safu!)

In this document, we'll go over the various built-in mechanisms for recovering funds from lnd due to any sort of data loss, or malfunction. Coins in lnd can exist in one of two pools: on-chain or off-chain. On-chain funds are outputs under the control of lnd that can be spent immediately, and without any auxiliary data. Off-chain funds on the other hand exist within a 2-of-2 multi-sig output typically referred to as a payment channel. Depending on the exact nature of operation of a given lnd node, one of these pools of funds may be empty.

Fund recovery for lnd will require two pieces of data:

  1. Your 24-word cipher seed
  2. Your encrypted Static Channel Backup file (or the raw data)

If one is only attempting to recover on chain funds, then only the first item is required.

The SCB file is encrypted using a key derived from the user's seed. As a result, it cannot be used in isolation.

On-Chain Recovery

24-word Cipher Seeds

When a new lnd node is created, it is given a 24-word seed phrase, called an aezeed cipher seed. The BIP39 and aezeed cipher seed formats look similar, but the only commonality they share is that they use the same default English wordlist. A valid seed phrase obtained over the CLI lncli create command looks something like:

!!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

---------------BEGIN LND CIPHER SEED---------------
 1. ability   2. noise   3. lift     4. document
 5. certain   6. month   7. shoot    8. perfect
 9. matrix   10. mango  11. excess  12. turkey
13. river    14. pitch  15. fluid   16. rack
17. drill    18. text   19. buddy   20. pool
21. soul     22. fatal  23. ship    24. jelly
---------------END LND CIPHER SEED-----------------

!!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

Wallet and Seed Passphrases

During the creation process, users are first prompted to enter a wallet password:

Input wallet password:
Confirm wallet password:

This password is used to encrypt the wallet on disk, which includes any derived master private keys or public key data.

Users can also optionally enter a second passphrase which we call the cipher seed passphrase:

Your cipher seed can optionally be encrypted.
Input your passphrase if you wish to encrypt it (or press enter to proceed without a cipher seed passphrase):

If specified, then this will be used to encrypt the cipher seed itself. The cipher seed format is unique in that the 24-word phrase is actually a ciphertext. As a result, there's no standard word list as any arbitrary encoding can be used. If a passphrase is specified, then the cipher seed you write down is actually an encryption of the entropy used to generate the BIP 32 root key for the wallet. Unlike a BIP 39 24-word phrase, the cipher seed is able to detect incorrect passphrase. BIP 39 on the other hand, will instead silently decrypt to a new (likely empty) wallet.

Starting On-Chain Recovery

The initial entry point to trigger recovery of on-chain funds in the command line is the lncli create command.

$   lncli create

Next, one can enter a new wallet password to encrypt any newly derived keys as a result of the recovery process.

Input wallet password:
Confirm wallet password:

Once a new wallet password has been obtained, the user will be prompted for their existing cipher seed:

Input your 24-word mnemonic separated by spaces: ability noise lift document certain month shoot perfect matrix mango excess turkey river pitch fluid rack drill text buddy pool soul fatal ship jelly

If a cipher seed passphrase was used when the seed was created, it MUST be entered now:

Input your cipher seed passphrase (press enter if your seed doesn't have a passphrase):

Finally, the user has an option to choose a recovery window:

Input an optional address look-ahead used to scan for used keys (default 2500):

The recovery window is a metric that the on-chain rescanner will use to determine when all the "used" addresses have been found. If the recovery window is two, lnd will fail to find funds in any addresses generated after the point in which two consecutive addresses were generated but never used. If an lnd on-chain wallet was extensively used, then users may want to increase the default value.

If all the information provided was valid, then you'll be presented with the seed again:


!!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

---------------BEGIN LND CIPHER SEED---------------
 1. ability   2. noise   3. lift     4. document
 5. certain   6. month   7. shoot    8. perfect
 9. matrix   10. mango  11. excess  12. turkey
13. river    14. pitch  15. fluid   16. rack
17. drill    18. text   19. buddy   20. pool
21. soul     22. fatal  23. ship    24. jelly
---------------END LND CIPHER SEED-----------------

!!!YOU MUST WRITE DOWN THIS SEED TO BE ABLE TO RESTORE THE WALLET!!!

lnd successfully initialized!

In lnd's logs, you should see something along the lines of (irrelevant lines skipped):

[INF] LNWL: Opened wallet
[INF] LTND: Wallet recovery mode enabled with address lookahead of 2500 addresses
[INF] LNWL: RECOVERY MODE ENABLED -- rescanning for used addresses with recovery_window=2500
[INF] CHBU: Updating backup file at test_lnd3/data/chain/bitcoin/simnet/channel.backup
[INF] CHBU: Swapping old multi backup file from test_lnd3/data/chain/bitcoin/simnet/temp-dont-use.backup to test_lnd3/data/chain/bitcoin/simnet/channel.backup
[INF] LNWL: Seed birthday surpassed, starting recovery of wallet from height=748 hash=3032830c812a4a6ea305d8ead13b52e9e69d6400ff3c997970b6f76fbc770920 with recovery-window=2500
[INF] LNWL: Scanning 1 blocks for recoverable addresses
[INF] LNWL: Recovered addresses from blocks 748-748
[INF] LNWL: Started rescan from block 3032830c812a4a6ea305d8ead13b52e9e69d6400ff3c997970b6f76fbc770920 (height 748) for 800 addresses
[INF] LNWL: Catching up block hashes to height 748, this might take a while
[INF] LNWL: Done catching up block hashes
[INF] LNWL: Finished rescan for 800 addresses (synced to block 3032830c812a4a6ea305d8ead13b52e9e69d6400ff3c997970b6f76fbc770920, height 748)

That final line indicates the rescan is complete! If not all funds have appeared, then the user may need to repeat the process with a higher recovery window. Depending on how old the wallet is (the cipher seed stores the wallet's birthday!) and how many addresses were used, the rescan may take anywhere from a few minutes to a few hours. To track the recovery progress, one can use the command lncli getrecoveryinfo. When finished, the following is returned,

$  lncli getrecoveryinfo
{
    "recovery_mode": true,
    "recovery_finished": true,
    "progress": 1
}

If the rescan wasn't able to complete fully (lnd was shutdown for example), then from lncli unlock, it's possible to restart the rescan from where it left off with the --recovery-window argument:

$  lncli unlock --recovery_window=2500

Note that if this argument is not specified, then the wallet will not re-enter the recovery mode and may miss funds during the portion of the rescan.

Forced In-Place Rescan

The recovery methods described above assume a clean slate for a node, so there's no existing UTXO or key data in the node's database. However, there're times when an existing node may want to manually rescan the chain. We have a command line flag for that! Just start lnd and add the following flag:

$  lnd --reset-wallet-transactions

The --reset-wallet-transactions flag will reset the best synced height of the wallet back to its birthday, or genesis if the birthday isn't known (for some older wallets).

Just run lnd with the flag, unlock it, then the wallet should begin rescanning. An entry resembling the following will show up in the logs once it's complete:

[INF] LNWL: Finished rescan for 800 addresses (synced to block 3032830c812a4a6ea305d8ead13b52e9e69d6400ff3c997970b6f76fbc770920, height 748)

Remember to remove the flag once the rescan was completed successfully to avoid rescanning again for every restart of lnd.

Off-Chain Recovery

After version v0.6-beta of lnd, the daemon now ships with a new feature called Static Channel Backups (SCBs). We call these static as they only need to be obtained once: when the channel is created. From there on, a backup is good until the channel is closed. The backup contains all the information we need to initiate the Data Loss Protection (DLP) feature in the protocol, which ultimately leads to us recovering the funds from the channel on-chain. This is a foolproof safe backup mechanism.

We say safe, as care has been taken to ensure that there are no foot guns in this method of backing up channels, vs doing things like rsyncing or copying the channel.db file periodically. Those methods can be dangerous as one never knows if they have the latest state of a channel or not. Instead, we aim to provide a simple, safe method to allow users to recover the settled funds in their channels in the case of partial or complete data loss. The backups themselves are encrypted using a key derived from the user's seed, this way we protect privacy of the users channels in the back up state, and ensure that a random node can't attempt to import another user's channels.

Given a valid SCB, the user will be able to recover funds that are fully settled within their channels. By "fully settled" we mean funds that are in the base commitment outputs, and not HTLCs. We can only restore these funds as right after the channel is created, as we have all the data required to make a backup, but lack information about the future HTLCs that the channel will process.

Obtaining SCBs

On-Disk channel.backup

There are multiple ways of obtaining SCBs from lnd. The most commonly used method will likely be via the channel.backup file that's stored on-disk alongside the rest of the chain data. This is a special file that contains SCB entries for all currently open channels. Each time a channel is opened or closed, this file is updated on disk in a safe manner (atomic file rename). As a result, unlike the channel.db file, it's always safe to copy this file for backup at ones desired location. The default location on Linux is: ~/.lnd/data/chain/bitcoin/mainnet/channel.backup

An example of using file system level notification to copy the backup to a distinct volume/partition/drive can be found here.

Using the ExportChanBackup RPC

Another way to obtain SCBS for all or a target channel is via the new exportchanbackup lncli command:

$  lncli --network=simnet exportchanbackup --chan_point=29be6d259dc71ebdf0a3a0e83b240eda78f9023d8aeaae13c89250c7e59467d5:0
{
    "chan_point": "29be6d259dc71ebdf0a3a0e83b240eda78f9023d8aeaae13c89250c7e59467d5:0",
    "chan_backup": "02e7b423c8cf11038354732e9696caff9d5ac9720440f70a50ca2b9fcef5d873c8e64d53bdadfe208a86c96c7f31dc4eb370a02631bb02dce6611c435753a0c1f86c9f5b99006457f0dc7ee4a1c19e0d31a1036941d65717a50136c877d66ec80bb8f3e67cee8d9a5cb3f4081c3817cd830a8d0cf851c1f1e03fee35d790e42d98df5b24e07e6d9d9a46a16352e9b44ad412571c903a532017a5bc1ffe1369c123e1e17e1e4d52cc32329aa205d73d57f846389a6e446f612eeb2dcc346e4590f59a4c533f216ee44f09c1d2298b7d6c"
}

$  lncli --network=simnet exportchanbackup --all
{
    "chan_points": [
        "29be6d259dc71ebdf0a3a0e83b240eda78f9023d8aeaae13c89250c7e59467d5:0"
    ],
    "multi_chan_backup": "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"
}

$  lncli --network=simnet exportchanbackup --all --output_file=channel.backup

As shown above, a user can either: specify a specific channel to backup, backup all existing channels, or backup directly to an on-disk file. All backups use the same format.

Streaming Updates via SubscribeChannelBackups

Using the gRPC interface directly, a new call: SubscribeChannelBackups. This call allows users to receive a new notification each time the underlying SCB state changes. This can be used to implement more complex backup schemes, compared to the file system notification based approach.

Recovering Using SCBs

If a node is being created from scratch, then it's possible to pass in an existing SCB using the lncli create or lncli unlock commands:

$  lncli create -multi_file=channel.backup

Alternatively, the restorechanbackup command can be used if lnd has already been created at the time of SCB restoration:

$  lncli restorechanbackup -h
NAME:
   lncli restorechanbackup - Restore an existing single or multi-channel static channel backup

USAGE:
   lncli restorechanbackup [command options] [--single_backup] [--multi_backup] [--multi_file=]

CATEGORY:
   Channels

DESCRIPTION:

  Allows a user to restore a Static Channel Backup (SCB) that was
  obtained either via the exportchanbackup command, or from lnd's
  automatically managed channel.backup file. This command should be used
  if a user is attempting to restore a channel due to data loss on a
  running node restored with the same seed as the node that created the
  channel. If successful, this command will allows the user to recover
  the settled funds stored in the recovered channels.

  The command will accept backups in one of three forms:

     * A single channel packed SCB, which can be obtained from
       exportchanbackup. This should be passed in hex encoded format.

     * A packed multi-channel SCB, which couples several individual
       static channel backups in single blob.

     * A file path which points to a packed multi-channel backup within a
       file, using the same format that lnd does in its channel.backup
       file.


OPTIONS:
   --single_backup value  a hex encoded single channel backup obtained from exportchanbackup
   --multi_backup value   a hex encoded multi-channel backup obtained from exportchanbackup
   --multi_file value     the path to a multi-channel back up file

Once the process has been initiated, lnd will proceed to:

  1. Given the set of channels to recover, the server will then will insert a series of "channel shells" into the database. These contain only the information required to initiate the DLP (data loss protection) protocol and nothing more. As a result, they're marked as "recovered" channels in the database, and we'll disallow trying to use them for any other process.
  2. Once the channel shell is recovered, the chanbackup package will attempt to insert a LinkNode that contains all prior addresses that we were able to reach the peer at. During the process, we'll also insert the edge for that channel (only in the outgoing direction) into the database as well.
  3. lnd will then start up, and as usual attempt to establish connections to all peers that we have channels open with. If lnd is already running, then a new persistent connection attempt will be initiated.
  4. Once we connect with a peer, we'll then initiate the DLP protocol. The remote peer will discover that we've lost data, and then immediately force close their channel. Before they do though, they'll send over the channel reestablishment handshake message which contains the unrevoked commitment point which we need to derive keys (will be fixed in BOLT 1.1 by making the key static) to sweep our funds.
  5. Once the commitment transaction confirms, given information within the SCB we'll re-derive all keys we need, and then sweep the funds.