The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster. It also has a 5-way tactile switch under the thumb.
Extravagance-wise, it's got audio, encoder support, per-key RGB and RGB underglow... and a 240x320 LCD. And for the safety conscious, it has ESD protection, transient voltage suppression, and polarity protection on both the USB connector as well as the split transport connector (USB-C for rev2+, TRS for rev1).
It also runs QMK Firmware!
Building can be done with:
make tzarc/djinn/rev2:default
BOM: Click
Fixes:
- 5-way tactile moved further away from thumb row
- Different current limiters used for RGB that are actually functional in the required range
BOM: Click
Issues:
- RGB current limiting has been reported to be problematic on Rev1 -- some builds have reported non-functional RGB without overriding the code to enable 1500mA limits
- Measurements taken do not show that the RGB pulls anything close to 1500mA, unknown if there's a manufacturing issue or component selection issue
- 5-way tactile switch is too close to the thumb row in Rev1 and pressing in the down direction can't be achieved very easily
