config.ini.dist

# Configuration file for Xiaomi Mi Flora Plant Sensor MQTT Client/Daemon
# Source: https://github.com/ThomDietrich/miflora-mqtt-daemon
#
# Uncomment and adapt all settings as needed.
# Some settings can be configured by environment variables.
# If an env variable is set, it takes precedence over settings in this file

[General]

# The operation mode of the program. Determines wether retrieved sensor data is published via MQTT or stdout/file.
# Currently supported:
#
#           mqtt-json - Publish to an MQTT broker in a proprietary json format (Default)
#           mqtt-pure - Nothin fancy, just the bare information
#          mqtt-homie - Publish to an MQTT broker following the Homie MQTT convention
#                       (https://github.com/marvinroger/homie)
#      mqtt-smarthome - Publish to an MQTT broker following the mqtt-smarthome proposal
#                       (https://github.com/mqtt-smarthome/mqtt-smarthome)
#  homeassistant-mqtt - Publish to an MQTT broker following the HomeAssistant discovery format
#                       (https://www.home-assistant.io/docs/mqtt/discovery/)
#         gladys-mqtt - Publish to an MQTT broker following the Gladys MQTT proposal
#                       https://gladysassistant.com/docs/integrations/mqtt/
#    thingsboard-json - Publish to the ThingsBoard MQTT broker
#                       (https://thingsboard.io)
#     wirenboard-mqtt - Publish to the Wiren Board MQTT broker
#                       (https://wirenboard.com)
#                json - Print to stdout as json encoded strings
#
#reporting_method = mqtt-json

# The bluetooth adapter that should be used to connect to Mi Flora devices (Default: hci0)
#adapter = hci0

[Daemon]

# Enable or Disable an endless execution loop (Default: true)
#enabled = true

# The period between two measurements in seconds (Default: 300)
#period = 300

[MQTT]

# The hostname or IP address of the MQTT broker to connect to (Default: localhost)
# Also read from the MQTT_HOSTNAME environment variable
#hostname = localhost

# The TCP port the MQTT broker is listening on (Default: 1883)
# Also read from the MQTT_PORT environment variable
#port = 1883

# Maximum period in seconds between ping messages to the broker. (Default: 60)
#keepalive = 60

# The MQTT base topic to publish all Mi Flora sensor data topics under.
# Default depends on the configured reporting_method
#base_topic = miflora                   # Default for: mqtt-json, mqtt-pure, mqtt-smarthome, homeassistant-mqtt
#base_topic = homie                     # Default for: mqtt-homie
#base_topic = gladys/master/device      # Default for: gladys-mqtt
#base_topic = v1/devices/me/telemetry   # Default for: thingsboard-json
#base_topic =                           # Default for: wirenboard-mqtt

# The MQTT broker authentification credentials (Default: no authentication)
# Will also read from MQTT_USERNAME and MQTT_PASSWORD environment variables
#username = user
#password = pwd123

# Enable TLS/SSL on the connection
#tls = false

# Path to CA Certificate file to verify host
#tls_ca_cert =

# Path to TLS client auth key file
#tls_keyfile =

# Path to TLS client auth certificate file
#tls_certfile =

[Sensors]

# Add your Mi Flora sensors here. Each sensor consists of a name and a Ethernet MAC address.
# Additional location information can be added to the name, delimited by an '@'.
# Scan for sensors from the command line with:
#    $ sudo hcitool lescan
#
# Examples:
#
#Schefflera@Living = C4:7C:8D:11:22:33
#JapaneseBonsai    = C4:7C:8D:44:55:66
#Petunia@Balcony   = C4:7C:8D:77:88:99