Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

saroo ultimate mortal kombat 3 loading too fast #206

Open
Amaru121926 opened this issue Nov 4, 2024 · 16 comments
Open

saroo ultimate mortal kombat 3 loading too fast #206

Amaru121926 opened this issue Nov 4, 2024 · 16 comments

Comments

@Amaru121926
Copy link

Amaru121926 commented Nov 4, 2024

saroo sega saturn ultimate mortal kombat 3 loading too fast...sound errors occur...how to set saroo for this game?

@kamugin
Copy link

kamugin commented Nov 8, 2024

Do you try add values in saroocfg.txt ?

# Ultimate Mortal Kombat III
[T-9701H V1.006]
sector_delay=1000
play_delay=1000

@Amaru121926
Copy link
Author

Amaru121926 commented Nov 8, 2024

I just added it's still too fast...
why does the cd drive work when the game is on?

@yzbss
Copy link

yzbss commented Nov 8, 2024

Since this game will try to start running the CD drive before starting, perhaps in the next update will fix this issue, now you can try the following Settings

#Ultimate Mortal Kombat 3 (USA)
[T-9701H V1.006]
M_0601875A=0009
M_060187AE=0009

@Amaru121926
Copy link
Author

Amaru121926 commented Nov 8, 2024

the game stops at the sega logo....sd card fat32 or exfat formatted?

@yzbss
Copy link

yzbss commented Nov 8, 2024

There are several versions of this game, I don't know which version you are using? What version of saroo firmware is used?

Ultimate Mortal Kombat 3 (USA) T-9701H V1.006 19960606

Ultimate Mortal Kombat 3 (Europe) T-25403H V1.007 19960607

Ultimate Mortal Kombat 3 (Europe) (Rev A) T-25403H V2.000 19960804

It has nothing to do with FAX32 or EX FAT format, the above setting applies to the (USA) version and will shut down your cd drive in the game. Using saroo v0.6 on my console will not run the cd drive

@Amaru121926
Copy link
Author

Amaru121926 commented Nov 9, 2024

Using saroo v0.6 on my console will not run the cd drive now but the game's music still doesn't work properly...still too fast.

@yzbss
Copy link

yzbss commented Nov 10, 2024

I am not familiar with the game and am not sure if the music is what I expected, so do you have normal and abnormal game music videos to watch?

@Amaru121926
Copy link
Author

play umk3 from the original cd and then play saroo... then you will understand what I mean...I know this game perfectly.

@yzbss
Copy link

yzbss commented Nov 10, 2024

I don't have a cd of the game, I tried the game's music using the mednafen emulator, and it's the same as when I played it on saroo, so I wanted to see what's wrong with the music you're talking about
Is your Saturn model 3200 gray in color?

@Amaru121926
Copy link
Author

Amaru121926 commented Nov 10, 2024

My saturn is japan model 3210 gray...Burn a CD with the game and use pseudo saturn to play.Then you will see how fast saroo is :)

@yzbss
Copy link

yzbss commented Nov 10, 2024

At present, this gray version of Saturn and saroo has sound issues, and the firmware has not been fixed, the following is the hardware fix
https://www.youtube.com/watch?v=nWIs6qGuU84

@Amaru121926
Copy link
Author

Unfortunately, this solution does not work, I would rather say that it is about parameters: sector_delay and play delay....

@TrekkiesUnite118
Copy link

TrekkiesUnite118 commented Nov 12, 2024

At present, this gray version of Saturn and saroo has sound issues, and the firmware has not been fixed, the following is the hardware fix https://www.youtube.com/watch?v=nWIs6qGuU84

So I think there's a misunderstanding going on here. That issue is specifically related to VA0 and VA0.X revision Saturn's. These motherboard revisions are only found in HST-3200 Model Saturns. The model the user has reported he's using is an HST-3210. While yes this is still a Gray Model 1 Saturn, these debuted with the new VA-SG (VA1) Motherboard revision around June of 1995. This change resulted in some tweaks to the overall case to accommodate some major changes. There's changes internally to handle the Power Supply no longer mounting to the top case, the CD-ROM Block no longer being a daughter board, and the unused fan slots are removed. Since the user has an HST-3210, the only motherboard revisions he should have are VA1 through VA3. So the issue requiring a hardware modification is unrelated as he doesn't have that Saturn revision.

You can verify this by looking at the Saturn Serial Number Database:
http://evilboris.sonic-cult.net/saturn/index.php?

For the actual issue here I'm guessing the issue has to do with the fact that UMK3 mixes some voice samples into the stage CD audio tracks to save memory. So for example at the start of a match when you hear "FIGHT!!!" the word "FIGHT!!!" is actually part of the background music track. So if things aren't loading at the expected speed my guess is that those words aren't playing in sync with the actual text on screen like they should be.

@Amaru121926
Copy link
Author

I don't think there is any misunderstanding here... I hope the game will work properly with the next saroo update...

@TrekkiesUnite118
Copy link

TrekkiesUnite118 commented Nov 14, 2024

I don't think there is any misunderstanding here... I hope the game will work properly with the next saroo update...

I hope it gets fixed too. I'm simply pointing out that the issue he was pointing to is completely unrelated as that's not the revision Saturn you have. The misunderstanding was thinking that all Gray Model 1 Saturns are VA0 revision boards.

@Amaru121926
Copy link
Author

Is there already a saroo update that will fix umk3?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants