From 21d51878cb50b82accaad8859ed1ddca424c2148 Mon Sep 17 00:00:00 2001 From: jgunstone Date: Wed, 21 Aug 2024 11:01:21 +0100 Subject: [PATCH] add `Device/Asset type identification and naming` heading --- BDNS_Specification_naming_syntax.md | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/BDNS_Specification_naming_syntax.md b/BDNS_Specification_naming_syntax.md index 25b77f6..61b9f39 100644 --- a/BDNS_Specification_naming_syntax.md +++ b/BDNS_Specification_naming_syntax.md @@ -37,7 +37,7 @@ The following specification clause is provided so that BDNS naming can be includ * https://github.com/theodi/BDNS/blob/master/BDNS_Specification_naming_syntax.md * https://github.com/theodi/BDNS/blob/master/BDNS_Abbreviations_Register.csv -## Device/Asset identification and naming +## Device/Asset instance identification and naming Each device or asset will be assigned as a minimum, the following attributes: @@ -50,6 +50,10 @@ Where a device or asset is represented in control system software then it shall Wherever possible, the naming shall be applied as close to the edge as possible, i.e. within the device itself rather than at a gateway device, e.g. an M-Bus meter may not be able to adopt the naming within the meters software itself due to the simplicity of the M-Bus protocol, meaning that a mapping would be required between the meter’s software identifier and the naming convention at a gateway. +## Device/Asset type identification and naming + +During early stages of design, or for generic components (/ BIM objects) where `can_be_connected` = False, and there are many instances in the BIM model that do not need individual identification (e.g. cables, data cables, pipework, ductwork, ...); it may be appropriate to give only a type identification of the object. In these scenarios refer to the [asset type naming](#Device/Asset-type-(asset.type)) guidance only. + ### Device/Asset instance GUID (asset.guid)