A wishlist and maybe a bugfix

[GitSchorschGit]

Hey developer!

First of all, thank you for that great work! In the past I worked with
LinuxCNC and maybe there are some good features for your program.

• Cone in another color when switching to another Offset ( G54 - G59, G92 )
  ( Maybe the color you can set in the „Offset“ menu )
• Grid would not be correct shown, if the X-Axis and Y-Axis maximum travel in the GRBL settings are changed
  ( I changed in the Program setting the auto scale tool button ( then sometimes workes )
• The Grid should always be fixed in the size specified GRBL settings.
  If you are on machine position X100 Y50 and you set the command: G92 X0 Y0 than the grid should not move. Only
  the imported G Code should move to the new position ( X0 Y0 - > new crosshair cursor position ). Then you can see
  immediately, if your workpiece extends your machine space and you could give a alert message. ( same as in LinuxCNC )
• The DRO should shown the actual and the maschine position separate in the same line to see immediately that a offset
  is working/switched on.

I tried ( 2.0.45p12 ) on Windows 10.

Again: Thank you for that work!

Best regards

[terjeio]

I'll take a look at this when I am back home, around mid November.