How to build x-wrt for your devices

First, fork this repository to your github account.

Clone it from your fork.

git clone https://github.com/[your_account]/build-release.git

Select a release tag to build.

You can find available tags at https://github.com/x-wrt/x-wrt/tags

For example tag 23.06_b202307110013

echo -n 23.06_b202307110013 >release.tag

Then you are going to build release tag 23.06_b202307110013

If you want to build master branch, then use master as tag name

echo -n master >release.tag

Run sh update-tags.sh <target> to start building your target.

Available targets see cat target.list

TARGET=ath79-generic
TARGET=ath79-generic-nosymbol
TARGET=ath79-nand
TARGET=ipq40xx-generic
TARGET=bcm27xx-bcm2709
TARGET=sunxi-cortexa7
TARGET=bcm27xx-bcm2710
TARGET=mediatek-mt7622
TARGET=mediatek-filogic
TARGET=qualcommax-ipq807x
TARGET=bcm27xx-bcm2711
TARGET=bcm53xx-generic
TARGET=ipq806x-generic
TARGET=kirkwood-generic
TARGET=mvebu-cortexa9
TARGET=ramips-mt7620
TARGET=ramips-mt7620-nosymbol
TARGET=ramips-mt7621
TARGET=ramips-mt7621-ext4fs
TARGET=ramips-mt76x8
TARGET=ramips-mt76x8-nosymbol
TARGET=rockchip-armv8
TARGET=armsr-armv8
TARGET=x86_64
TARGET=x86_64-docker

For example, to build all ipq40xx-generic target devices, please run:

sh update-tags.sh ipq40xx-generic

What is your device target?

You can find your device firmware at https://downloads.x-wrt.com/rom/

and then you should known the target name

for example:

Xiaomi Mi Router R3 target is ramips-mt7620

P&W R619AC target is ipq40xx-generic

x86 64bits target is x86_64

...