Linux-cheat-sheet

Click ⭐if you like the project. Pull Request are highly appreciated. Follow me @SudheerJonna for technical updates.

User Information

who It is used to get information about currently logged in user on to system. If you don't provide any option or arguments, the command displays the following information for each logged-in user.
1. Login name of the user
2. User terminal
3. Date & Time of login
4. Remote host name of the user
```
$ who
sudheer :0 2019-08-04 01:21 (:0)
```
whoami: It display the system’s username
```
$ whoami
sudheer
```

id: It display the user identification(the real and effective user and group IDs) information

$ id
uid=1000(sj) gid=1000(sj) groups=1000(sj),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),120(lpadmin),131(lxd),132(sambashare)

groups: This command is used to display all the groups for which the user belongs to.
```
$ group
sj: sj, adm, cdrom, sudo, dip, plugdev, lpadmin, lxd, sambashare
```
finger: Used to check the information of any currently logged in users. i.e, It displays users login time, tty (name), idle time, home directory, shell name etc.
```
$ finger
Login     Name       Tty      Idle  Login Time   Office     Office Phone
sj        sj        *:0             Aug 28 01:27 (:0)
```
This may not be available by default in many linux machines. In this case, you need to install it manually.
```
$ sudo apt install finger
```
users: Displays usernames of all users currently logged on the system.
```
$ users
sj
```
grep: It is a powerful pattern searching tool to find information about a specific user from the system accounts file: /etc/passwd.
```
$ grep -i sj /etc/passwd
sj:x:1000:1000:sj,,,:/home/sj:/bin/bash
```

W Command: It(W) is a command-line utility that displays information about currently logged in users and what each user is doing.

w [OPTIONS] [USER]

Example:
w
 18:45:04 up  2:09,  1 user,  load average: 0.09, 0.07, 0.02
USER     TTY      FROM             LOGIN@   IDLE   JCPU   PCPU WHAT
sj       :0       :0               01:27   ?xdm?   1:14   0.01s /usr/lib/gdm3/g

last or lastb: Displays a list of last logged in users on the system. You can pass user names to display their login and hostname details.

last [options] [username...] [tty...]

Example:

last
sj       :0           :0               Fri Aug 28 01:27    gone - no logout
reboot   system boot  5.4.0-29-generic Fri Aug 28 01:27   still running
sj       :0           :0               Wed Jul 29 11:46 - crash (29+13:40)
reboot   system boot  5.4.0-29-generic Wed Jul 29 11:45   still running
sj       :0           :0               Thu May 14 21:04 - crash (75+14:41)
reboot   system boot  5.4.0-29-generic Thu May 14 21:03   still running

wtmp begins Thu May 14 21:03:56 2020

lastlog: The lastlog command is used to find the details of a recent login of all users or of a given user.

$ lastlog

Username         Port     From             Latest
root                                       **Never logged in**
daemon                                     **Never logged in**
bin                                        **Never logged in**
sys                                        **Never logged in**
sync                                       **Never logged in**
games                                      **Never logged in**
man                                        **Never logged in**
lp                                         **Never logged in**
mail                                       **Never logged in**
news                                       **Never logged in**

⬆ Back to Top

File and directory commands

pwd The pwd(Present Working Directory) command is used to print the name of the present/current working directory starting from the root.
```
$ pwd
/home/sj/Desktop/Linux
```

ls: The ls command is used to list files or directories. It also accepts some flags or options that changes how files or directories are listed in your terminal.

 Syntax:
 ls [flags] [directory]

 Example:
 $ ls
 bin dev lib libx32 mnt  

 //Listing files & directories with time in a rever order
 $ ls -ltr
 drwxr-xr-x 2 sj sj 4096 May 14  2020 Videos
 drwxr-xr-x 2 sj sj 4096 May 14  2020 Templates
 drwxr-xr-x 2 sj sj 4096 May 14  2020 Public

 //Home directory
 $ ls ~
 Desktop    Downloads  Pictures  Sudheer    test   test.txt
 Documents  Music      Public    Templates  test1  Videos

Below are the list of possible options for ls command,

-a Show all (including hidden)
-R Recursive list
-r Reverse order
-t Sort by last modified
-S Sort by file size
-l Long listing format
-1 One file per line
-m Comma-separated output
-Q Quoted output

mkdir The mkdir(make directory) command allows users to create directories or folders.
```
$ mkdir ubuntu
$ ls
ubuntu
```
The option '-p' is used to create multiple directories or parent directories at once.
```
$ mkdir -p dir1/dir2/dir3
$ cd dir1/dir2/dir3
~/Desktop/Linux/dir1/dir2/dir3$
```
rmdir: The rmdir(remove directories) is used to remove empty directories. Can be used to delete multiple empty directories as well. Safer to use compared to rm -r FolderName. This command can also be forced to delete non-empty directories.
1. Remove empty directory:
```
rmdir FolderName
```
1. Remove multiple directories:
```
rmdir FolderName1 FolderName2 FolderName3
```
1. Remove non-empty directories:
```
rmdir FolderName1 --ignore-fail-on-non-empty
```
1. Remove entire directory tree. This command is similar to rmdir a/b/c a/b a:
```
rmdir -p a/b/c
```
rm: The rm(remove) command is used to remove objects such as files, directories, symbolic links etc from the file system.
1. Remove file: The rm command is used to remove or delete a file
```
rm file_name
```
1. Remove file forcefully: The rm command with -f option is used for removal of file without prompting for confirmation.
```
rm -f filename
```
1. Remove directory: The rm command with -r option is used to remove the directory and its contents recursively.
```
rm -r myDir
```
1. Remove directory forcefully: The rm command with -rf option is used to forcefully remove directory recursively.
```
rm -rf myDir
```
touch: The touch command is is used to create, change and modify timestamps of a file without any content.
1. Create a new file: You can create a single file at a time using touch command. The file created is an empty file.
```
touch file_name
```
2. Create multiple files: You can create the multiple numbers of files at the same time.
```
touch file1_name file2_name file3_name
```
3. Change access time: The touch command with a option is used to change the access time of a file.
```
touch -a file_name
```
4. Change modification time: The touch command with m option is used to change the modified time.
```
touch -m file_name
```
5. Use timestamp of other file: The touch command with r option is used to get timestamp of another file.
```
touch -r file2 file1
```
  In the above example, we get the timestamp of file1 for file2.
6. Create file with Specific time: The touch command with 't' option is used to create a file with specified time.
```
touch -t 1911010000 file_name
```
cat: The cat command is used to create single or multiple files, view contain of file, concatenate files and redirect output in terminal or files.
```
$ cat [OPTION] [FILE]...
```
1. Create a file: Used to create a file with specific name, content and press exit using CTRL + D
```
cat > file_name1.txt
Hello, How are you?
```
2. View file contents: You can view contents of a single or more files by mentioning the filenames.
```
cat file_name1 file_name2
```
3. More & Less options: If a file having a large number of content that won’t fit in the output terminal then more & less options can be used to indiate additional content.
```
cat file_name1.txt | more
cat file_name1.txt | less
```

⬆ Back to Top

File permissions

Since Linux is a multi-user operating system, it is necessary to provide security to prevent people from accessing each other’s confidential files. So Linux divides authorization into 2 levels,

Ownership: Each file or directory has assigned with 3 types of owners i. User: Owner of the file who created it. ii. Group: Group of users with the same access permissions to the file or directory. iii. Other: Applies to all other users on the system
Permissions: Each file or directory has following permissions for the above 3 types of owners.

i. Read: Give you the authority to open and read a file and lists its content for a directory.

ii. Write: Give you the authority to modify the contents of a file and add, remove and rename files stored in the directory.

iii. Execute: Give you the authority to run the program in Unix/Linux.

The permissions are indicated with below characters,
```
  r = read permission

  w = write permission

  x = execute permission

  \- = no permission
```
The above authorization levels represented in a diagram

There is a need to restrict own file/directory access to others.

Change access: The chmod command is used to change the access mode of a file. This command is used to set permissions (read, write, execute) on a file/directory for the owner, group and the others group.

chmod [reference][operator][mode] file...

Example
chmod ugo-rwx test.txt

There are 2 ways to use this command,

Absolute mode: The file permissions will be represented in a three-digit octal number.

The possible permissions types represented in a number format as below.

Permission Type	Number	Symbol
No Permission	0	---
Execute	1	--x
Write	2	-w-
Execute + Write	3	-wx
Read	4	r--
Read + Execute	5	r-x
Read + Write	6	rw-
Read + Write + Execute	7	rwx

Let's update the permissions in absolute mode with an example as below,

 chmode 764 test.txt

Symbolic mode: In the symbolic mode, you can modify permissions of a specific owner unlike absolute mode.

The owners are represented as below,

Owner Description

u user/owner

g group

o other

a all

and the list of mathematical symbols to modify the file permissions as follows,

Operator Description

+ Adds permission

- Removes the permission

= Assign the permission

Changing Ownership and Group: It is possible to change the the ownership and group of a file/directory using chown command.

chown user filename
chown user:group filename

Example:
chown John test.txt
chown John:Admin test.txt

Change group-owner only: Sometimes you may need to change group owner only. In this case, chgrp command need to be used

chgrp group_name filename

Example:
sudo chgrp Administrator test.txt

⬆ Back to Top

Networking

Display network information: ifconfig command is used to display all network information(ip address, ports etc)

ifconfig -a

Test connection to a remote machine: Send an echo request to test connection of a remote machine.
```
ping <ip-address> or hostname

Example:
ping 10.0.0.11
```
Show IP Address: Display ip address of a currennt machine
```
hostname -I
(OR)
ip addr show
```
Active ports: Shows active or listening ports
```
netstat -pnltu
```
Find information about domain: whois command is used to find out information about a domain, such as the owner of the domain, the owner’s contact information, and the nameservers used by domain.
```
whois [domain]

Example:
whois google.com
```

⬆ Back to Top

Installing packages

Install package:

yum install package_name

Package description: The info command is used to display brief details about a package.

yum info package_name

Uninstall package: The remove command is used to remove or uninstall package name.

yum remove package_name

Install package from local file:

It is also possible to install package from local file named package_name.rpm.

rpm -i package_name.rpm

Install from source code:

tar zxvf sourcecode.tar.gz
cd sourcecode
./configure
make
make install

⬆ Back to Top

Disk usage

Synopsis: du command is used to check the information of disk usage of files and directories on a machine

du [OPTION]... [FILE]...

Disk usage of a directory: To find out the disk usage summary of a /home/ directory tree and each of its sub directories

du  /home/

Disk usage in human readable format: To find out the disk usage in human readable format

du  -h /home/

Total disk usage of a directory: To find out the total disk usage

du  -sh /home/

Total disk usage of all files and directories: To find out the total disk usage of files and directories

du  -ah /home/

Total disk usage of all files and directories upto certain depth: print the total for a directory only if it is N or fewer levels below the command

du  -ah --max-depth 2 /home/

Total disk usage with excluded files: To find out the total disk usage of files and directories, but excludes the files that matches given pattern.

du -ah --exclude="*.txt" /home/

Help: This command gives information about du

du  --help

⬆ Back to Top

System and Hardware information

Print all information: uname is mainly used to print system information.

$ uname -a

Print kernel name:

$ uname -s

Print kernel release:

$ uname -r

Print Architecture:

$ uname -m

Print Operating System:

$ uname -o

⬆ Back to Top

Search Files

Pattern search: The grep command is used to search patterns in files.

grep pattern files
grep -i // Case sensitive
grep -r // Recursive
grep -v // Inverted search

Example:
grep "^hello" test.txt // Hello John
grep -i "hELLo" text.txt // Hello John

Find files and directories:

The find command is used to find or search files and directories by file name, folder name, creation date, modification date, owner and permissions etc and perform subsequent operations on them.

i. Search file with name:

find ./directory_name -name file_name

Example:
find ./test -name test.txt // ./test/test.txt

ii. Search file with pattern:

find ./directory_name -name file_pattern

Example:
find ./test -name *.txt // ./test/test.txt

iii. Search file with executable action:

find ./directory_name -name file_name -exec command

Example:
find ./test -name test.txt -exec rm -i {} \; // Search file and delete it after confirmation

iv. Search for empty files or directories:

The find command is used to search all empty folders and files in the entered directory or sub-directories.

find ./directory_name -empty

Example:
find ./test -empty
//./test/test1
//./test/test2
//./test/test1.txt

v. Search for files with permissions:

The find command is used to find all the files in the mentioned directory or sub-directory with the given permissions

find ./directory_name -perm permission_code

Example:
find ./test -perm 664

vi. Search text within multiple files:

find ./ -type f -name file_pattern -exec grep some_text  {} \;

Example:
find ./ -type f -name "*.txt" -exec grep 'World'  {} \; // Hello World

Whereis to locate binary or source files for a command: The whereis command in Linux is used to locate the binary, source, and manual page files for a command. i.e, It is used to It is used to find executables of a program, its man pages and configuration files.

whereis command_name

Example:
whereis netstat //netstat:  /bin/netstat /usr/share/man/man8/netstat.8.gz(i.e, executable and location of its man page)

Locate to find files: The locate command is used to find the files by name. This command is faster compared to find command because it searches database for the filename instead of searching your filesystem.

locate [OPTION] PATTERN

Example:
locate "*.txt" -n 10 // 10 file search results ending with .txt extension

⬆ Back to Top

SSH

SSH (Secure Shell) is a network protocol that enables secure remote connections between two systems.

Connect remote machine using IP address or machine name: The remote server can be connected with local user name using either host name or IP address

ssh <host-name> or <ip-address>

Example:
ssh 192.111.66.100
ssh test.remoteserver.com

Connect remote machine using username: It is also possible specify a user for an SSH connection.

ssh username@hostname_or_ip-address

Example:
ssh john@192.0.0.22
ssh john@test.remoteserver.com

:Connect remote machine using custom port By default, the SSH server listens for a connection on port 22. But you can also specify the custom port.

ssh <host-name> or <ip-address> -p port_number

Example:
ssh test.remoteserver.com -p 3322

Generate SSH keys using keygen: SSH Keygen is used to generate a key pair which consists of public and private keys to improve the security of SSH connections.

ssh-keygen -t rsa

Copying SSH keys to servers: For SSH authentication, ssh-copy-id command will be used to copy public key(id_rsa.pub) to server.

ssh-copy-id hostname_or_IP

Copy a File Remotely over SSH: SCP tool is used to securely copy files over the SSH protocol.

scp fileName user@remotehost:destinationPath

Example:
scp test.txt test@10.0.0.64:/home/john/Desktop

Edit SSH Config File SSH server options customized by editing the settings in sshd_config file.

sudo vim /etc/ssh/sshd_config

Run commands on a remote server SSH commands can be executed on remote machine using the local machine.

ssh test.remoteserver.com mkdir NewDirectoryName // Creating directory on remote machine

Restart SSH service: You need to restart the service in Linux after making changes to SSH configuration.

sudo ssh service restart
(or)
sudo sshd service restart

⬆ Back to Top

Vi/Vim-commands

Vi editor is the most popular text editor from the early days of Unix. Whereas Vim(Vi IMproved) is an improved version of vi editor to be used in CLI (command line interface) for mainly text editing tasks in many configuration files. Some of the other alternatives are Elvis, Nvi, Nano, Joe, and Vile. It has two main operation modes,

Command Mode: It allows the entry of commands to manipulate text.
Entry mode(Or Insert mode): It allows typed characters on the keyboard into the current file.

1. Start with Vi Editor

You can create a new file or open an existing file using vi filename command.

 vi <filename_NEW> or <filename_EXISTING> // Create a new file or open an existing file

 Example:
 vi first.txt

Let's see how do you create file, enter the content and leave the CLI by saving the changes.

Create a new file named first.txt
Press i to enter the insert mode
Enter the text "Hello World!"
Save the text and exit by pressing :wq! command
Check the entered text

2. Cursor movement

These commands will be used in Command mode.

Move cursor

You can use arrow keys(left, right, up and down) to move the cursor on the terminal. But you can also other keys for this behavior.

 h        # Move left
 j        # Move down
 k        # Move up
 l        # Move right

Jump one word

These commands used to jump one word at a time

w        # Jump forwards to the start of a word
W        # Jump forwards to the start of a WORD
e        # Jump forwards to the start of a word
E        # Jump forwards to the start of a WORD
b        # Jump backwords to the start of a word
B        # Jump backwords to the start of a WORD

Jump to start or end of a line or next line

These commands used to jump starting or ending of a line or a next line.

^        # Jump to the start of a current line
$        # Jump to the end of a current line
return   # Jump to the start of a next line

Move sides

These commands used to moves all sides of the screen

Backspace # Move cursor one character to the left
Spacebar  # Move cursor one character to the right
H(High)   # Move cursor to the top of the screen
M(Middle) # Move cursor to the middle of the screen
L(Low)    # Move cursor to the bottom of the screen

Paging and Scrolling

Paging is used to moves the cursor up or down through the text a full screen at a time. Whereas Scrolling happens line by line.

Ctrl + f     # move forward one full screen
Ctrl + b     # move backward one full screen
Ctrl + d     # move forward half a screen
Ctrl + u     # move backward half a screen

Inserting Text

These commands places vi in entry mode from command mode. First, you need to be in command mode to use the below commands.

Insert

i    # Insert text to the left of the cursor
I    # Insert text at the beginning of a line
ESC  # Exit insert mode

Append

a    # Insert(or Append) text to the right of the cursor
A    # Insert(or Append) text at the end of a line

Open a line

o    # Open a line below the current cursor position
O    # open a line above the current cursor position

Editing Text

Change word: Change word/part of word to right of cursor
```
cw
```
Change line Change entire line
```
cc
```
Change line from specific character Change from cursor to end of line
```
C
```

Deleting Text

Deleting One Character: Position the cursor over the character to be deleted and type x
```
x
X       //To delete one character before the cursor
```
Deleting a Word: Position the cursor at the beginning of the word and type dw
```
dw
```
Deleting a Line: Position the cursor anywhere on the line and type dd.
```
dd
```

Cut, Copy & Paste

Copy, Cut and Paste operations can be done in either Normal or visual Mode.

Normal mode: This mode appears on click of Esc key.

Copy There are various copy or yank commands based on amount of text to be copied. The y character is used to perform this operation.

i. Copy an entire line: Just place the cursor at the beginning of the line and type yy
```
yy
```
ii.Copy three lines: Just place the cursor from where to start copying and type 3yy
```
3yy
```
iii. Copy word with trailing whitespace: Place the cursor at the beginning of the word and type yaw
```
yaw
```
iv. Copy word without trailing whitespace: Place the cursor at the beginning of the word and type yiw.
```
yiw
```
v. Copy right of the cursor: Copy text right of the cursor to the end of line using y$ command
```
y$
```
vi.Copy left of the cursor: Copy text left of the cursor to the end of line using y^ command
```
y^
```
vii. Copy text between the cursor and character: Copy text between the cursor and specified character.
```
ytx(Copy until x and x is excluded)
yfx(Copy until x and x is included)
```
Cut There are various cutting or deleting commands based on amount of text to be deleted. The d character is used to perform this operation.

i. Cut entire line: Cut the entire line where the cursor is located
```
dd
```
ii.Cut three lines: Cut the three lines starting from the place where cursor is located
```
3dd
```
iii.Cut right of the cursor: Cut the text from the right of the cursor till the end of line
```
d$
```
iii.Cut left of the cursor: Cut the text from the left of the cursor till the beginning of line
```
d^
```
Paste This operation is performed using p command to paste the selected text
```
p
```
Visual Mode In this mode, first select the text using below keys
1. v (lowercase): To select individual characters
2. V (uppercase): To select the entire line
3. Ctrl+v: To select by block
and perform copy, cut and paste operations using y,d and p commands

Exiting

These commands are used to exit from the file.
```cmd
:w	    # Write (save) the file, but don't exit
:wq	    # Write (save) and quit
:wq!	# Force write (save) and quit
:q	    # Quit, but it fails if anything has changed
:q!	    # Quit and throw away for any changes
```

⬆ Back to Top

Name		Name	Last commit message	Last commit date
Latest commit History 2 Commits
images		images
tutorial		tutorial
.gitignore		.gitignore
README.md		README.md

No.	Topic
1	User information
2	File and directory commands
3	File permissions
4	Networking
5	Installing packages
6	Disk usage
7	System and Hardware information
8	Search Files
9	SSH
10	Vi/Vim-commands

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Linux-cheat-sheet

Table of Contents

User Information

File and directory commands

File permissions

Networking

Installing packages

Disk usage

System and Hardware information

Search Files

SSH

Vi/Vim-commands

1. Start with Vi Editor

2. Cursor movement

Move cursor

Jump one word

Jump to start or end of a line or next line

Move sides

Paging and Scrolling

Inserting Text

Insert

Append

Open a line

Editing Text

Deleting Text

Cut, Copy & Paste

Exiting

About

Releases

Packages

Operator	Description
+	Adds permission
-	Removes the permission
=	Assign the permission

srihernogo/cheat-sheet-linux

Folders and files

Latest commit

History

Repository files navigation

Linux-cheat-sheet

Table of Contents

User Information

File and directory commands

File permissions

Networking

Installing packages

Disk usage

System and Hardware information

Search Files

SSH

Vi/Vim-commands

1. Start with Vi Editor

2. Cursor movement

Move cursor

Jump one word

Jump to start or end of a line or next line

Move sides

Paging and Scrolling

Inserting Text

Insert

Append

Open a line

Editing Text

Deleting Text

Cut, Copy & Paste

Exiting

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Packages