NEWS

Version 1.2.9a fixes a bug in the 1.2.9 release that causes a build failure when
pdnsd is configured with --enable-strict-rfc2181. Unless you use this option to
compile pdnsd, there is no need to upgrade from 1.2.9 to 1.2.9a.

Version 1.2.9 has support for many additional RR types, in particular those
needed for DNSSEC (though no support for the DNSSEC protocol itself yet in
pdnsd). Caching data structures are now more efficient when they only store the
most commonly used RR types. Fine-grained configurability over which RR-types
are cache-able. Pdnsd now has support for EDNS (Extension mechanisms for DNS),
although its usefulness is currently limited to enabling UDP messages larger
than 512 bytes. Defining local TXT records in the configuration file is now
supported.  A new configuration option provides a fix in case the query uptest
fails due to remote servers ignoring empty queries. Several bugs have been fixed
including a UDP socket descriptor leak that affected the FreeBSD platform, and
an IPv6 port binding bug.

Version 1.2.8 implements support for automatic discovery of root servers.
There are also some improvements in the resolver and a new default setting for
the neg_rrs_pol configuration option.

Version 1.2.7-par fixes some security problems. It contains a fix for a
"dangling pointer" bug that could cause pdnsd to crash when it received a long
reply. It also addresses some of the issues raised in the CERT vulnerability
note VU#800113 by making the default of query_port_start equal to 1024, thereby
ensuring that source ports are randomly selected by the pdnsd resolver in the
range 1024-65535. This release also fixes problems with compiling pdnsd for the
ARM architecture and for the Darwin platform (Max OS X).  There are a number of
(minor) new features. pdnsd now supports "include" files, essentially
configuration files that only contain definitions for local records. It is now
possible to define interactively, using pdnsd-ctl, any local record that can be
defined in a configuration file.

Version 1.2.6-par has an upgraded license: GPL version 3.
A bug has been fixed which which caused pdnsd to handle NXDOMAIN replies
inefficiently when configured with neg_domain_pol=on.  Also the code for the
ping test has been fixed, which was broken for 64-bit systems.  A new option
randomize_servers can be used to give each server in a section of the
configuration file an equal chance of being queried.  The new options reject,
reject_policy and reject_recursively make it possible to check for the presence
of certain IP addresses in the replies of name servers and to correct some types
of unwanted replies or to censor these IP addresses.
The pdnsd-ctl 'add a' and 'add aaaa' commands now allow multiple IP addresses to
be specified for the same name. There are some further improvements to pdnsd's
recursive resolver.

Version 1.2.5-par introduces a new query method: udp_tcp. With this method a UDP
query is tried first and, if the UDP answer is truncated, the query is repeated
using TCP, which is the behaviour that seems to be recommended by the DNS
standards. There is a new configuration option use_nss, which can be turned off
to prevent lengthy timeouts and stalls in certain situations. A bug has been
fixed which could cause pdnsd to crash if debug output was generated before the
debug output stream was properly initialized.

In version 1.2.4-par a memory leak and a minor buffer-overflow problem have been
fixed. There is now a fix for some situations that would previously cause pdnsd
to exit prematurely (such as ACPI S3 sleep or trying to attach strace to pdnsd).
Time intervals specified in the configuration file can now be expressed in
minutes, hours, days and weeks as well as seconds. Support for Apple Mac OS X
v10.4 Tiger has been improved. The "pdnsd-ctl status" command now also provides
some information about the status of the running threads. There are some further
improvements in the debugging information provided by pdnsd.
TCP-query support is now compiled in by default (but can still be disabled using
the configure option --disable-tcp-queries).

In version 1.2.3-par the "pdnsd-ctl empty-cache" command can be provided with an
include/exclude list, allowing the user to specify a selection of names to be
removed, instead of emptying the cache completely.
Additional improvements: pdnsd should now remain responsive while executing the
"pdnsd-ctl empty-cache" command. With the query_method=tcp_udp option pdnsd will
now also try a UDP query after a TCP connection times out, which should allow
pdnsd to resolve the same names with query_method=tcp_udp as with
query_method=udp_only, although perhaps with an occasional delay.
"pdnsd-ctl config" or "pdnsd-ctl server" commands should now run without delays,
even if pdnsd is performing ping or query uptests at the time. A problem with
resolving certain names using root servers has been fixed.

Version 1.2.2-par has a number of important portability improvements. A bug has
been fixed that prevented pdnsd from compiling successfully on some 64 bit
architectures. The code for determining endianness (most significant or least
significant byte first) should now be more portable. This release has
(experimental) support for the Darwin (Apple Mac OS X) platform. On Linux
systems, the configure script will now try to detect automatically whether the
system implements the Native POSIX Thread Library, but the method used may not
necessarily be foolproof. In addition, the debug features have been improved and
should make it easier to find out why pdnsd considers some queries or replies
malformed.

Version 1.2.1-par has improved support for non-Linux platforms. This release has
(experimental) support for the Cygwin platform, and should also fix some
compilation glitches that have been reported by FreeBSD users.

Version 1.2-par is a new and improved version of pdnsd! Most of the changes
effect the internal workings of pdnsd, but there are also a number of
interesting new features (well, I think they are interesting). Among the bugs
fixed are two rather nasty ones which involve the handling of NXT and NAPTR
records and which can cause pdnsd to crash or abort. The new features include a
new server availability test which can be specified with uptest=query, support
for reading the DNS configuration from resolv.conf files, a new option for
optimizing the use of root servers, a new option that makes defining local
records for reverse resolving easier, support for defining wildcard records, a
new pdnsd-ctl command for reloading the config file without restarting pdnsd,
and a new pdnsd-ctl command for dumping information about the names stored in
the cache.
The documentation has also been updated: there is now a pdnsd.conf man page. For
a more complete list of the changes I'll have to refer you to README.par and the
ChangeLog.

Version 1.1.11a-par contains a fix for FreeBSD users that bypasses a problem
with the macro ENONET, which can cause a compilation failure when it is
undefined. Linux users will notice no difference between 1.1.11a-par and
1.1.11-par.

Version 1.1.11-par has a rather large number of small changes, which are rather
difficult to summarize. Among the bugs fixed are a race condition in the cache
lookup code, a flaw in the code that caused a busy spin when a remote server
answered with "Not Implemented", and problems with the -4 and -6 command-line
options. Among the improvements are an alternative sorting algorithm which
should allow pdnsd to start up faster when reading a large cache file from disk,
automatic mapping of IPv4 to IPv6 addresses when running in IPv6 mode, somewhat
more efficient memory use, better compression of the replies and changes in the
parallel querying algorithm that should improve the chances of catching a reply
from a remote server.  For a more complete list of the changes I'll have to
refer you to README.par and the ChangeLog.

Version 1.1.10-par has a new parser for configuration files, completely
rewritten from scratch in C. The main advantages are: (f)lex and yacc/bison are
no longer needed to build pdnsd, more informative error messages instead of
merely "parse error", and string literals no longer need to be enclosed in
quotes in most cases.  Furthermore, a bug has been fixed that caused incorrect
IPV6-type PTR records to be generated when sourcing /etc/hosts like files.
There have been other small changes, more details can be found in the ChangeLog.

Version 1.1.9-par adds some missing pieces to the documentation (the pdnsd
manual and the man page for pdnsd-ctl). The changes to the code consist mostly
of optimizations, removal of some size limits due to fixed-size buffers, and
some cleaning up. I've also tried to make the error responses of pdnsd-ctl more
helpful.  More details can be found in the ChangeLog.

Version 1.1.8b1-par8 introduces a "delegation-only" feature that may be useful
for blocking Verisign's Sitefinder. The parser for the configuration file now
tolerates domain names missing a dot at the end. I have provided alternative
implementations for some GNU extensions that I used in an effort to make the
code more portable. In particular, the code should build on FreeBSD again. More
details can be found in the README.par file.

Version 1.1.8b1-par7 fixing a number of bugs. I have also reworked some of the
code for adding and removing entries in the cache in an effort to improve
efficiency and stability. More details can be found in the ChangeLog.

Version 1.1.8b1-par6 introduces some further code cleanup. In addition the
documentation has been revised.

Version 1.1.8b1-par5 fixes a troublesome allocation size error that has been
discovered in Thomas Moestl's code. In practice this bug only wastes memory but
it could also potentially lead to memory corruption. Upgrading is
recommended. More details can be found in the ChangeLog.

Version 1.1.8b1-par4 has been released.  Due to incompatibilities between
various implementations of the pthread library on Linux systems, problems can
occur with signal handling in pdnsd. The usual symptom is failure by pdnsd to
save the cache to disk, and /var/cache/pdnsd/pdnsd.cache remaining empty. If you
experience this kind of trouble, try reconfiguring with different values for the
new --with-thread-lib option. The allowable values are described in the
documentation.

pdnsd is no longer maintained by Thomas Moestl: I have not had time to maintain
pdnsd for quite a while now, and have been very slow to respond to issues, or
did not respond at all. It is time that I officially announce that pdnsd is no
longer actively maintained; I apologize to all those who reported bugs or asked
questions without receiving any reply. However, Paul A. Rombouts has published a
patch set against the last released version at
http://www.phys.uu.nl/~rombouts/pdnsd.html, which cleans up a lot of code fixes
many bugs.

Version 1.1.7a fixes a reversed assertion that would cause pdnsd to terminate
if used with the ping uptest. No other changes were made.

Version 1.1.7 fixes some problems that might be remotely exploitable to
gain access as the user pdnsd runs as (an unprivileged user by default). To do
this, an attacker needs to control a name server that is queried by pdnsd, and
send a malicious reply to such a query. Upgrading is strongly recommended!
There are also minor bug fixes and stability improvements.

Version 1.1.6 adds the query_port_start and query_port_end options (contributed
by Andreas Steinmetz), that allow confining the ports pdnsd uses for outgoing
queries to a certain range. It also fixes numerous bugs, one of which could
cause pdnsd to hang; update is therefore recommended.

Version 1.1.5 contains a fix for a security bug that would allow local users
that are allowed to use pdnsd-ctl on a running pdnsd server to execute
arbitrary code as the user that pdnsd runs as (or on Linux, when strict_setuid
is not enabled, as the user that started pdnsd). The danger of this is usually
quite limited; the status socket is not enabled by default, it's default
permissions do only allow the user pdnsd runs as to use the socket,
strict_setuid is enabled by default and pdnsd runs as an unprivileged user.
There is also a new configure option, --enable-underscores, that will make
pdnsd allow underscores in domain names. Furthermore, the SRV record handling
has been fixed to allow underscores in any case (this was not allowed
previously, but is required by the RFC). SOA records are not put in the
answer section any more if no answers are found (this violates the RFC's).
It may be put in the authority section in a later version.
There are also various bugfixes in this release.
Upgrade is recommended.

Version 1.1.4 fixes various smaller bugs, and should also improve the cache
write performance especially for larger caches.	There are also two new
features: servers can now be given a label (using the label server option)
which can be used to identify them for the pdnsd-ctl server command
(contributed by Andrew M. Bishop), and local records can be marked to make
the domain record authoritative in pdnsd's cache (which means that pdnsd will
assume that records that are not present in the cache for that domain are
non-existent); this is on by default now, and can be controlled using the new
authrec server option).

Version 1.1.3 added contrib/ and had a lot of robustness fixes.
This release addresses a security hole that affects only Linux systems. Due to
a bug in glibc, pdnsd could crash during a port scan. This release contains
a workaround for this, as well as a fix for a deadlock under heavy load 
conditions. It also fixes a possible problem that could be triggered by 
malicious servers, and contains numerous bug fixes.
A script, contributed by Marko Stolle, makes pdnsd useful in a DHCP setup.
pdnsd also preservers the case of names in the cache, and should work much
better on alpha machines (thanks for the contributions by Bjoern Fischer 
and P.J. Bostley that made this possible). New types were dded for rr 
sections and pdnsd-ctl.
Upgrade is recommended.

Version 1.1.2 has a fix for a bug that could cause SERVFAIL to be 
returned when NXDOMAIN would be appropriate. The bug surfaced only when
pdnsd queried name servers with a behaviour different from BIND's in the
NXDOMAIN case, e.g. pdnsd querying another pdnsd or e.g. djbdns. 

Version 1.1.1 fixes a possible race condition in status socket creation.
This race might be used by a local attacker to change the access 
permissions of a certain file in /tmp. The risk of this is probably 
negligible. The default setup uses a non-privileged user, default mode 
0600, and the status socket is disabled normally, so this should be 
relatively safe. I don't see any possibility to exploit this, it is
more of a paranoia fix.
There are also some other minor fixes and documentation improvements. 
Upgrade is recommended. 

Version 1.1.0 introduces negative cacheing, pdnsd-ctl enhancements and
a much improved FreeBSD support. The cache file format has changed from
prior releases. Some configuration defaults have changed, too.

Version 1.0.15 is mostly a bugfix release. It also has a new option:
randomize_recs in the global section.

Version 1.0.14 has a fix in icmp.c that will make it build properly
on FreeBSD and older Linux systems.

Version 1.0.13 has some code cleanup, a fix for the Debian rc install,
and a security fix (contributed by Olaf Kirch): when changing
user and group id, pdnsd did not drop supplementary group IDs that
the original user was member of.

Version 1.0.12 is a bugfix release and contains some security
enhancements. There are also inclusion/exclusion lists for servers
(new options include=, exclude=, policy= in the server
section).

Version 1.0.11 fixes two bugs that might be used for denial-of-service
attacks, upgrading is recommended.

Versions 1.0.9 and 1.0.10 are bugfix releases.

Version 1.0.8 introduces special linux ppp device support contributed
by Ron Yorston, and has some bugfixes.

Version 1.0.7 introduces autoconf support, many new config file options and
the new pdnsd-ctl run-time configuration program.

Version 1.0.6 has another set of bugfixes, in addition to higher compile-
time configurability and UDP query support. It also contains Debian rc
scripts contributed by Markus Mohr.

Version 1.0.5 has some bugfixes and the new "server_ip" option 
contributed by Wolfgang Ocker.

Version 1.0.4 introduces the new options run_as, strict_setuid and
paranoid. These new options are optional security enhancements.

Versions 1.0.1, 1.0.2 and 1.0.3 are bugfix releases.

Version 1.0.0 has a lot of changes compared to the 0.9.x tree, but much of 
them "under the hood":
- IPv6 support (experimental; compile- and run-time configurable)
- FreeBSD (and such hopefully *BSD) support
- better rfc2181 compatability
- new options:
  - serve_aliases in source section
  - linkdown_kluge in global section 
  - max_ttl in global section 
- cache-code reorganization, only one unified hash (of variable depth)
- Optimizations & cleanups
- Automatic deps (only interesting for developers ;-)

Version 0.9.11 fixes a locally exploitable security hole (the cache file was
world writeable by default). Please see ChangeLog.old for details.

Version 0.9.10 fixes some bugs and improves build on Red Hat.

Version 0.9.9 contains the rc scripts for Red Hat Linux contributed by Torben 
Janssen, in addition to code cleanups and bugfixes.
The meaning of the option -v has changed in this release.
There is also a new config file option "lean_query" that is on by default. It 
is an optimization, so please look in the docs when updating whether you want 
it switched on or not.

When compiling versions after 0.9.8, you will probably get more
compiler warningsthan before. This is because the C compiler settings
have been made stricter.

Version 0.9.8 fixes a minor bug some build problems with glibc2.0 systems.

The versions 0.9.6 and 0.9.7 are bugfix releases.

Version 0.9.5 introduces uptest=exec, and a modified config file syntax (cache
sizes are now specified in kB).

Version 0.9.4 was the first to be released to the public. For information on 
changes, see ChangeLog.