Skip to content

Latest commit

 

History

History
305 lines (211 loc) · 9.5 KB

README.md

File metadata and controls

305 lines (211 loc) · 9.5 KB
Raw

Fpush

fpush is a scalable push server for XMPP implemetingXEP-0357. fpush can be connected to any XMPP server as a XMPP component using XEP-0114.

Table of contents

Features

  • Supported push platforms
    • Apple APNS
    • Google FCM
  • Multi app / platform support on a single XMPP domain/JID
  • Configurable token ratelimiting

Usage

./fpush settings.json

XMPP API

This appserver implements XEP-0357 commands for sending actual push notifications. fpush does not require devices to register for push before usage like other appserver implementations.

fpush expects each push IQ to include the push token of the device to be woken up, as well as the info to which push module the token applies. Hence, push messages can be enabled by a client at their XMPP server as follows:

<iq type='set' id='x43'>
  <enable xmlns='urn:xmpp:push:0' jid='###pushServerComponentJid###' node='###DevicePushToken###'>
    <x xmlns='jabber:x:data' type='submit'>
      <field var='FORM_TYPE'><value>http://jabber.org/protocol/pubsub#publish-options</value></field>
      <field var='pushModule'><value>##pushModuleName###</value></field>
    </x>
  </enable>
</iq>

If the pushModule identifier is missing in the publish-options, fpush will instead selected the default push module as configured.

Configuration

{
    "component": {
        "componentHostname": "<ComponentJid>",
        "componentKey": "ARandomComponentKeySetInsideTheXMPPServer",
        "serverHostname": "<XMPP-Server>",
        "serverPort": <XMPP-Server Component Port>
    },
    "pushModules": { // map of configured push modules
        "monalProdiOS": { // push module identifier that is later set inside the push iqs as "pushModule"
            "type": "apple", // push module type
            "is_default_module": true, // Use this push module in case no pushModule was defined in a push iq msg
            "apns": {
                "certFilePath": "<Path to p12 file>",
                "certPassword": "<cert password>",
                "topic": "<app bundle id>"
            },
            "ratelimit": {
                "ratelimitTime": "20s", // minimal duration between two pushes
                "ratelimitCleanupInterval": "300s", // time how long old and unseen tokens should be keept inside the ratelimit cache before removal
                "enabled": true // optionally disable ratelimit. Not advised for apple apns
            }
        },
        "someAndroidApp": {
            "type": "google",
            "is_default_module": false,
            "fcm": {
                "fcmSecretPath": "<Path to json from google>"
            }
        },
    },
    "timeout": {
        "xmppconnectionError": "20s" // time to wait after XMPP component connection failed before reconnecting
    }
}

The configuration file consists of three sections. XMPP component settings (component) the push module configurations (pushModules) and a timeout config for the xmpp connection (timeout).

component

This section describes all config parameters for the XMPP component connection to the XMPP server handling all S2S connections.

componentHostname

JID of the pushserver. Must match the component JID configured on the XMPP server.

componentKey

The component handshake element as configured on the XMPP server

serverHostname

Hostname or IP address of the XMPP component endpoint (Usually the XMPP server that handles all S2S connections)

serverPort

Port of the XMPP component endpoint configured on the XMPP server.

pushModules

Map of all push modules that should be loaded on start. Each push module can either be for apple APNS or for googles FCM. Each push module is identified by the key specified in the map. This identifier is later used by clients to specifiy which of the configured push modules should be selected when an XMPP IQ is received by fpush.

Each push module consists of a type element. Currently apple and google are supported.

is_default_module

If set to true, this push modules is used if an XMPP IQ was received that does not include any push module identifier. Only one push module can be configured as the default module.

ratelimit

Ratelimits for push tokens can be configured per push module.

enabled

Enable or disable ratelimiting for tokens It is not advised to disable the ratelimiting

ratelimitTime

Minimal time between pushes for each push token. If two push IQs are received for the same token within less time, the latter one is queued. If more push request arrive for a token, while one push request is already queued, all further requests are ignored and an wait IQ is replied until the configured ratelimitTime is over.

ratelimitCleanupInterval

fpush caches the last timestamp when an push messages was sent for an token per push module to implement the ratelimit. This cache is cleaned every 300 seconds. On each cleaning run, tokens that were send more than ratelimitCleanupInterval ago are removed to free up memory space.

apns

This section describes all apns related push options.

`certFilePath``

Path to the p12 certificate that should be used to connect to the APNS API.

certPassword

Passwort of the p12 certificate.

topic

Bundle ID of the main app.

environment

APNS environment to use. Supports production and sandbox. Default: production

fcm

This section describes all fcm related push options.

fcmSecretPath

Path to the fcm json file created by google.

timeout

xmppconnectionError

Time to wait after XMPP component connection failed before reconnecting

Structure

Fpush connects to a single XMPP server, that handles all S2S connections, as a XMPP component using an unencrypted connection. We thus recommend to either place fpush on the same system as the XMPP server or securing the connection between the systems using IPsec or wireguard.

If the XMPP server is unreachable fpush will automatically try to reconnect after the configured time.

Clustering

fpush can be clustered by simply running multiple servers on the same XMPP domain. Using SRV records S2S traffic can be steered between the servers.

fpush currently does not exchange ratelimit information betweeen cluster nodes. Instead each node manages its own independent ratelimit. Hence, devices that are registered on more than on XMPP server may, receive push notifications via more than one cluster more frequent than expected.

Compilation

fpush is written in Rust. (https://www.rust-lang.org/tools/install)

Debug build

cargo build

Release build

cargo build --release

Compilation Flags

fpush supports several features that can be activated while building using the --feature <Flag1>,<Flag2> flag.

Default features

Currently the following features are enabled by default.

  • random_delay_before_push
  • enable_apns_support
  • enable_fcm_support

The default features can be disabled using --no-default-features.

Logging

release_max_level_warn

Remove all log messages lower than "WARN" from binary to increase speed.

release_max_level_info

Remove all log messages lower than "INFO" from binary to increase speed.

Push module support

Push modules support for different push vendors can be enabled during compilation. For improved performance it is adviced to only enable/compile the needed push modules types (e.g. only apns).

enable_fcm_support

Enable google fcm support for android devices.

enable_apns_support

Enable apple apns support for iOS, iPadOS and macOS devices.

enable_demo_support

Enable a simple demo push endpoint used during development.

random_delay_before_push

Improve ratelimit acurracy by waiting a random delay before handling each push message.

For each incomming push event fpush spawns a new tokio thread. Within each thread fpush checks if the supplied token is blocked or if the token is ratelimited. After a push message was sent for a token, fpush ratelimits the token (if configured) for a configured time to reduce the battery consumption of the remote device. Due to the multi thread design, two directly consecutive push events for the same token may not be correctly ratelimited. Hence, adding a random async delay helps to improve the accuracy while keeping memory and cpu consumption low.

Expandability

Fpush can easily be expanded to support further push platforms by creating a new crate implementing the PushTrait.

Systemd

We recommend running fpush as a seperate user without root permissions.

[Unit]
Description=Fpush
After=network.target
StartLimitIntervalSec=0

[Service]
Type=simple
Restart=always
RestartSec=10
User=fpush
Group=fpush
LimitNOFILE=131072
WorkingDirectory=/opt/fpush/
Environment=RUST_LOG=info
ExecStart=/opt/fpush/fpush settings.json

[Install]
WantedBy=multi-user.target