Configure WiFi settings using the Web UI

After first flash, or, when you alter your WiFi network, then you need to configure your wifi settings.

1. Wait for the ESP to go into the AP config mode.
2. Open your WiFi setting (smartphone or computer)
3. Then select OTGW-XX-XX-XX-XX-XX
4. A configuration screen should pop up. If this does not happen, just go to 192.168.4.1
5. Now simply configure your WiFi setup.
6. After the device is connected to WiFi, connect to the WebUI and goto http://otgw.local

In the Web UI you can go to the Setting by clicking the icon:

Read more on how to continue to setup the OTGW firmware on the ESP 8266.