presentation.mplstyle

#### MATPLOTLIBRC FORMAT

## This is a sample matplotlib configuration file - you can find a copy
## of it on your system in site-packages/matplotlib/mpl-data/matplotlibrc
## (which related to your Python installation location).
##
## If you edit it there, please note that it will be overwritten in your
## next install.  If you want to keep a permanent local copy that will not
## be overwritten, place it in one of the following locations:
## unix/linux:
##     $HOME/.config/matplotlib/matplotlibrc OR
##     $XDG_CONFIG_HOME/matplotlib/matplotlibrc (if $XDG_CONFIG_HOME is set)
## other platforms:
##     $HOME/.matplotlib/matplotlibrc
##
## See https://matplotlib.org/users/customizing.html#the-matplotlibrc-file
## for more details on the paths which are checked for the configuration file.
##
## This file is best viewed in a editor which supports python mode syntax
## highlighting.  Blank lines, or lines starting with a comment symbol, are
## ignored, as are trailing comments.  Other lines must have the format:
##     key : val  ## optional comment
##
## Formatting and style conventions for this file:
##     - at least one whitesapce AROUND `:` to seperate key and val
##         * prefer one whitesapce except for block colon alignment
##     - at least two whitesapces BEFORE `##` to seperate the key-val pair and
##       the trailing comments
##         * prefer two whitesapces except for block `##` alignment
##     - at least one whitesapce AFTER `##` to seperate the `##` marker and
##       the comment text
##         * prefer one whitesapce except for indentation (listing, etc.), in
##           which case, four more whitespaces are preferred
##
## Colors: for the color values below, you can either use
##     - a matplotlib color string, such as r, k, or b
##     - an rgb tuple, such as (1.0, 0.5, 0.0)
##     - a hex string, such as ff00ff
##     - a scalar grayscale intensity such as 0.75
##     - a legal html color name, e.g., red, blue, darkslategray
##
## Matplotlib configuration are currently divided into following parts:
##     - BACKENDS
##     - LINES
##     - PATCHES
##     - HATCHES
##     - BOXPLOT
##     - FONT
##     - TEXT
##     - LaTeX
##     - AXES
##     - DATES
##     - TICKS
##     - GRIDS
##     - LEGEND
##     - FIGURE
##     - IMAGES
##     - CONTOUR PLOTS
##     - ERRORBAR PLOTS
##     - HISTOGRAM PLOTS
##     - SCATTER PLOTS
##     - AGG RENDERING
##     - PATHS
##     - SAVING FIGURES
##     - INTERACTIVE KEYMAPS
##     - ANIMATION

##### CONFIGURATION BEGINS HERE


## ***************************************************************************
## * BACKENDS                                                                *
## ***************************************************************************
## The default backend.  If you omit this parameter, the first working
## backend from the following list is used:
##     MacOSX Qt5Agg Qt4Agg Gtk3Agg TkAgg WxAgg Agg
## Other choices include:
##     Qt5Cairo Qt4Cairo GTK3Cairo TkCairo WxCairo Cairo Wx
##     PS PDF SVG Template
## You can also deploy your own backend outside of matplotlib by referring to
## the module name (which must be in the PYTHONPATH) as 'module://my_backend'.
#backend : Agg

## The port to use for the web server in the WebAgg backend.
#webagg.port : 8988

## The address on which the WebAgg web server should be reachable
#webagg.address : 127.0.0.1

## If webagg.port is unavailable, a number of other random ports will
## be tried until one that is available is found.
#webagg.port_retries : 50

## When True, open the webbrowser to the plot that is shown
#webagg.open_in_browser : True

## If you are running pyplot inside a GUI and your backend choice
## conflicts, we will automatically try to find a compatible one for
## you if backend_fallback is True
#backend_fallback : True

#interactive : False
#toolbar     : toolbar2  ## {None, toolbar2}
#timezone    : UTC       ## a pytz timezone string, e.g., US/Central or Europe/Paris


## ***************************************************************************
## * LINES                                                                   *
## ***************************************************************************
## See https://matplotlib.org/api/artist_api.html#module-matplotlib.lines
## for more information on line properties.
lines.linewidth : 1 ## line width in points
#lines.linestyle : -    ## solid line
#lines.color     : C0   ## has no affect on plot(); see axes.prop_cycle
#lines.marker          : None  ## the default marker
#lines.markerfacecolor : auto  ## the default marker face color
#lines.markeredgecolor : auto  ## the default marker edge color
#lines.markeredgewidth : 1.0   ## the line width around the marker symbol
#lines.markersize      : 6     ## marker size, in points
#lines.dash_joinstyle  : round       ## {miter, round, bevel}
#lines.dash_capstyle   : butt        ## {butt, round, projecting}
#lines.solid_joinstyle : round       ## {miter, round, bevel}
#lines.solid_capstyle  : projecting  ## {butt, round, projecting}
#lines.antialiased : True  ## render lines in antialiased (no jaggies)

## The three standard dash patterns.  These are scaled by the linewidth.
#lines.dashed_pattern : 3.7, 1.6
#lines.dashdot_pattern : 6.4, 1.6, 1, 1.6
#lines.dotted_pattern : 1, 1.65
#lines.scale_dashes : True

#markers.fillstyle : full  ## {full, left, right, bottom, top, none}


## ***************************************************************************
## * PATCHES                                                                 *
## ***************************************************************************
## Patches are graphical objects that fill 2D space, like polygons or circles.
## See https://matplotlib.org/api/artist_api.html#module-matplotlib.patches
## for more information on patch properties.
#patch.linewidth       : 1      ## edge width in points.
#patch.facecolor       : C0
#patch.edgecolor       : black  ## if forced, or patch is not filled
#patch.force_edgecolor : False  ## True to always use edgecolor
#patch.antialiased     : True   ## render patches in antialiased (no jaggies)


## ***************************************************************************
## * HATCHES                                                                 *
## ***************************************************************************
#hatch.color     : black
#hatch.linewidth : 1.0


## ***************************************************************************
## * BOXPLOT                                                                 *
## ***************************************************************************
#boxplot.notch       : False
#boxplot.vertical    : True
#boxplot.whiskers    : 1.5
#boxplot.bootstrap   : None
#boxplot.patchartist : False
#boxplot.showmeans   : False
#boxplot.showcaps    : True
#boxplot.showbox     : True
#boxplot.showfliers  : True
#boxplot.meanline    : False

#boxplot.flierprops.color           : black
#boxplot.flierprops.marker          : o
#boxplot.flierprops.markerfacecolor : none
#boxplot.flierprops.markeredgecolor : black
#boxplot.flierprops.markeredgewidth : 1.0
#boxplot.flierprops.markersize      : 6
#boxplot.flierprops.linestyle       : none
#boxplot.flierprops.linewidth       : 1.0

#boxplot.boxprops.color     : black
#boxplot.boxprops.linewidth : 1.0
#boxplot.boxprops.linestyle : -

#boxplot.whiskerprops.color     : black
#boxplot.whiskerprops.linewidth : 1.0
#boxplot.whiskerprops.linestyle : -

#boxplot.capprops.color     : black
#boxplot.capprops.linewidth : 1.0
#boxplot.capprops.linestyle : -

#boxplot.medianprops.color     : C1
#boxplot.medianprops.linewidth : 1.0
#boxplot.medianprops.linestyle : -

#boxplot.meanprops.color           : C2
#boxplot.meanprops.marker          : ^
#boxplot.meanprops.markerfacecolor : C2
#boxplot.meanprops.markeredgecolor : C2
#boxplot.meanprops.markersize      :  6
#boxplot.meanprops.linestyle       : --
#boxplot.meanprops.linewidth       : 1.0


## ***************************************************************************
## * FONT                                                                    *
## ***************************************************************************
## The font properties used by `text.Text`.
## See https://matplotlib.org/api/font_manager_api.html for more information
## on font properties.  The 6 font properties used for font matching are
## given below with their default values.
##
## The font.family property has five values:
##     - 'serif' (e.g., Times),
##     - 'sans-serif' (e.g., Helvetica),
##     - 'cursive' (e.g., Zapf-Chancery),
##     - 'fantasy' (e.g., Western), and
##     - 'monospace' (e.g., Courier).
## Each of these font families has a default list of font names in decreasing
## order of priority associated with them.  When text.usetex is False,
## font.family may also be one or more concrete font names.
##
## The font.style property has three values: normal (or roman), italic
## or oblique.  The oblique style will be used for italic, if it is not
## present.
##
## The font.variant property has two values: normal or small-caps.  For
## TrueType fonts, which are scalable fonts, small-caps is equivalent
## to using a font size of 'smaller', or about 83%% of the current font
## size.
##
## The font.weight property has effectively 13 values: normal, bold,
## bolder, lighter, 100, 200, 300, ..., 900.  Normal is the same as
## 400, and bold is 700.  bolder and lighter are relative values with
## respect to the current weight.
##
## The font.stretch property has 11 values: ultra-condensed,
## extra-condensed, condensed, semi-condensed, normal, semi-expanded,
## expanded, extra-expanded, ultra-expanded, wider, and narrower.  This
## property is not currently implemented.
##
## The font.size property is the default font size for text, given in pts.
## 10 pt is the standard value.
##
## Note that font.size controls default text sizes.  To configure
## special text sizes tick labels, axes, labels, title, etc, see the rc
## settings for axes and ticks.  Special text sizes can be defined
## relative to font.size, using the following values: xx-small, x-small,
## small, medium, large, x-large, xx-large, larger, or smaller

font.family  : sans-serif
#font.style   : normal
#font.variant : normal
#font.weight  : normal
#font.stretch : normal
#font.size    : 10.0

#font.serif : Times
#font.serif      : DejaVu Serif, Bitstream Vera Serif, Computer Modern Roman, New Century Schoolbook, Century Schoolbook L, Utopia, ITC Bookman, Bookman, Nimbus Roman No9 L, Times New Roman, Times, Palatino, Charter, serif
#font.sans-serif : DejaVu Sans, Bitstream Vera Sans, Computer Modern Sans Serif, Lucida Grande, Verdana, Geneva, Lucid, Arial, Helvetica, Avant Garde, sans-serif
#font.cursive    : Apple Chancery, Textile, Zapf Chancery, Sand, Script MT, Felipa, cursive
#font.fantasy    : Comic Neue, Comic Sans MS, Chicago, Charcoal, ImpactWestern, Humor Sans, xkcd, fantasy
#font.monospace  : DejaVu Sans Mono, Bitstream Vera Sans Mono, Computer Modern Typewriter, Andale Mono, Nimbus Mono L, Courier New, Courier, Fixed, Terminal, monospace


## ***************************************************************************
## * TEXT                                                                    *
## ***************************************************************************
## The text properties used by `text.Text`.
## See https://matplotlib.org/api/artist_api.html#module-matplotlib.text
## for more information on text properties
#text.color : black


## ***************************************************************************
## * LaTeX                                                                   *
## ***************************************************************************
## See following links for more information on LaTex properties:
## https://matplotlib.org/tutorials/text/usetex.html
## https://scipy-cookbook.readthedocs.io/items/idx_matplotlib_typesetting.html
#text.usetex : True  ## use latex for all text handling. The following fonts
                      ## are supported through the usual rc parameter settings:
                      ## new century schoolbook, bookman, times, palatino,
                      ## zapf chancery, charter, serif, sans-serif, helvetica,
                      ## avant garde, courier, monospace, computer modern roman,
                      ## computer modern sans serif, computer modern typewriter
                      ## If another font is desired which can loaded using the
                      ## LaTeX \usepackage command, please inquire at the
                      ## matplotlib mailing list
#text.latex.preamble :      ## IMPROPER USE OF THIS FEATURE WILL LEAD TO LATEX FAILURES
                            ## AND IS THEREFORE UNSUPPORTED. PLEASE DO NOT ASK FOR HELP
                            ## IF THIS FEATURE DOES NOT DO WHAT YOU EXPECT IT TO.
                            ## text.latex.preamble is a single line of LaTeX code that
                            ## will be passed on to the LaTeX system. It may contain
                            ## any code that is valid for the LaTeX "preamble", i.e.
                            ## between the "\documentclass" and "\begin{document}"
                            ## statements.
                            ## Note that it has to be put on a single line, which may
                            ## become quite long.
                            ## The following packages are always loaded with usetex, so
                            ## beware of package collisions: color, geometry, graphicx,
                            ## type1cm, textcomp.
                            ## Adobe Postscript (PSSNFS) font packages may also be
                            ## loaded, depending on your font settings.
#text.latex.preview : False

#text.hinting : auto  ## May be one of the following:
                      ##     - none: Perform no hinting
                      ##     - auto: Use FreeType's autohinter
                      ##     - native: Use the hinting information in the
                      ##               font file, if available, and if your
                      ##               FreeType library supports it
                      ##     - either: Use the native hinting information,
                      ##               or the autohinter if none is available.
#text.hinting_factor : 8  ## Specifies the amount of softness for hinting in the
                          ## horizontal direction.  A value of 1 will hint to full
                          ## pixels.  A value of 2 will hint to half pixels etc.
#text.kerning_factor : 0  ## Specifies the scaling factor for kerning values. This
                          ## is provided solely to allow old test images to remain
                          ## unchanged. Set to 6 to obtain previous behavior. Values
                          ## other than 0 or 6 have no defined meaning.
#text.antialiased : True  ## If True (default), the text will be antialiased.
                          ## This only affects the Agg backend.

## The following settings allow you to select the fonts in math mode.
## They map from a TeX font name to a fontconfig font pattern.
## These settings are only used if mathtext.fontset is 'custom'.
## Note that this "custom" mode is unsupported and may go away in the future.
#mathtext.cal : cursive
#mathtext.rm  : sans
#mathtext.tt  : monospace
#mathtext.it  : sans:italic
#mathtext.bf  : sans:bold
#mathtext.sf  : sans
#mathtext.fontset : dejavusans  ## Should be 'dejavusans' (default),
                                ## 'dejavuserif', 'cm' (Computer Modern), 'stix',
                                ## 'stixsans' or 'custom'
#mathtext.fallback_to_cm : True  ## When True, use symbols from the Computer Modern
                                 ## fonts when a symbol can not be found in one of
                                 ## the custom math fonts.
#mathtext.default : it  ## The default font to use for math.
                        ## Can be any of the LaTeX font names, including
                        ## the special name "regular" for the same font
                        ## used in regular text.


## ***************************************************************************
## * AXES                                                                    *
## ***************************************************************************
## Following are default face and edge colors, default tick sizes,
## default fontsizes for ticklabels, and so on.  See
## https://matplotlib.org/api/axes_api.html#module-matplotlib.axes
#axes.facecolor     : white   ## axes background color
#axes.edgecolor     : black   ## axes edge color
#axes.linewidth     : 0.8     ## edge linewidth
#axes.grid          : False   ## display grid or not
#axes.grid.axis     : both    ## which axis the grid should apply to
#axes.grid.which    : major   ## gridlines at {major, minor, both} ticks
axes.titlelocation : center  ## alignment of the title: {left, right, center}
axes.titlesize     : medium   ## fontsize of the axes title
axes.titleweight   : bold  ## font weight of title
#axes.titlecolor    : auto    ## color of the axes title, auto falls back to text.color
                              ## as default value
#axes.titlepad      : 6.0     ## pad between axes and title in points
axes.labelsize     : medium  ## fontsize of the x any y labels
#axes.labelpad      : 4.0     ## space between label and axis
#axes.labelweight   : normal  ## weight of the x and y labels
#axes.labelcolor    : black
#axes.axisbelow     : line    ## draw axis gridlines and ticks:
                              ##     - below patches (True)
                              ##     - above patches but below lines ('line')
                              ##     - above all (False)

#axes.formatter.limits : -5, 6  ## use scientific notation if log10
                                ## of the axis range is smaller than the
                                ## first or larger than the second
#axes.formatter.use_locale : False  ## When True, format tick labels
                                    ## according to the user's locale.
                                    ## For example, use ',' as a decimal
                                    ## separator in the fr_FR locale.
#axes.formatter.use_mathtext : False  ## When True, use mathtext for scientific
                                      ## notation.
#axes.formatter.min_exponent : 0  ## minimum exponent to format in scientific notation
#axes.formatter.useoffset : True  ## If True, the tick label formatter
                                  ## will default to labeling ticks relative
                                  ## to an offset when the data range is
                                  ## small compared to the minimum absolute
                                  ## value of the data.
#axes.formatter.offset_threshold : 4  ## When useoffset is True, the offset
                                      ## will be used when it can remove
                                      ## at least this number of significant
                                      ## digits from tick labels.

axes.spines.left   : True  ## display axis spines
axes.spines.bottom : True
axes.spines.top    : False
axes.spines.right  : False

#axes.unicode_minus : True  ## use Unicode for the minus symbol
                            ## rather than hyphen.  See
                            ## https://en.wikipedia.org/wiki/Plus_and_minus_signs#Character_codes
#axes.prop_cycle : cycler('color', ['1f77b4', 'ff7f0e', '2ca02c', 'd62728', '9467bd', '8c564b', 'e377c2', '7f7f7f', 'bcbd22', '17becf'])
                   ## color cycle for plot lines as list of string colorspecs:
                   ##     single letter, long name, or web-style hex
				   ## As opposed to all other paramters in this file, the color
				   ## values must be enclosed in quotes for this parameter,
				   #  e.g. '1f77b4', instead of 1f77b4.
                   ## See also https://matplotlib.org/tutorials/intermediate/color_cycle.html
                   ## for more details on prop_cycle usage.
#axes.autolimit_mode : data  ## How to scale axes limits to the data.  By using:
                             ##     - "data" to use data limits, plus some margin
                             ##     - "round_numbers" move to the nearest "round" number
#axes.xmargin   : .05   ## x margin.  See `axes.Axes.margins`
#axes.ymargin   : .05   ## y margin.  See `axes.Axes.margins`
#polaraxes.grid : True  ## display grid on polar axes
#axes3d.grid    : True  ## display grid on 3d axes


## ***************************************************************************
## * DATES                                                                   *
## ***************************************************************************
## These control the default format strings used in AutoDateFormatter.
## Any valid format datetime format string can be used (see the python
## `datetime` for details).  For example, by using:
##     - '%%x' will use the locale date representation
##     - '%%X' will use the locale time representation
##     - '%%c' will use the full locale datetime representation
## These values map to the scales:
##     {'year': 365, 'month': 30, 'day': 1, 'hour': 1/24, 'minute': 1 / (24 * 60)}

#date.autoformatter.year        : %Y
#date.autoformatter.month       : %Y-%m
#date.autoformatter.day         : %Y-%m-%d
#date.autoformatter.hour        : %m-%d %H
#date.autoformatter.minute      : %d %H:%M
#date.autoformatter.second      : %H:%M:%S
#date.autoformatter.microsecond : %M:%S.%f


## ***************************************************************************
## * TICKS                                                                   *
## ***************************************************************************
## See https://matplotlib.org/api/axis_api.html#matplotlib.axis.Tick
#xtick.top           : False   ## draw ticks on the top side
#xtick.bottom        : True    ## draw ticks on the bottom side
#xtick.labeltop      : False   ## draw label on the top
#xtick.labelbottom   : True    ## draw label on the bottom
#xtick.major.size    : 3.5     ## major tick size in points
#xtick.minor.size    : 2       ## minor tick size in points
#xtick.major.width   : 0.8     ## major tick width in points
#xtick.minor.width   : 0.6     ## minor tick width in points
#xtick.major.pad     : 3.5     ## distance to major tick label in points
#xtick.minor.pad     : 3.4     ## distance to the minor tick label in points
#xtick.color         : black   ## color of the tick labels
xtick.labelsize     : medium  ## fontsize of the tick labels
#xtick.direction     : out     ## direction: {in, out, inout}
#xtick.minor.visible : False   ## visibility of minor ticks on x-axis
#xtick.major.top     : True    ## draw x axis top major ticks
#xtick.major.bottom  : True    ## draw x axis bottom major ticks
#xtick.minor.top     : True    ## draw x axis top minor ticks
#xtick.minor.bottom  : True    ## draw x axis bottom minor ticks
#xtick.alignment     : center  ## alignment of xticks

#ytick.left          : True    ## draw ticks on the left side
#ytick.right         : False   ## draw ticks on the right side
#ytick.labelleft     : True    ## draw tick labels on the left side
#ytick.labelright    : False   ## draw tick labels on the right side
#ytick.major.size    : 3.5     ## major tick size in points
#ytick.minor.size    : 2       ## minor tick size in points
#ytick.major.width   : 0.8     ## major tick width in points
#ytick.minor.width   : 0.6     ## minor tick width in points
#ytick.major.pad     : 3.5     ## distance to major tick label in points
#ytick.minor.pad     : 3.4     ## distance to the minor tick label in points
#ytick.color         : black   ## color of the tick labels
ytick.labelsize     : medium  ## fontsize of the tick labels
#ytick.direction     : out     ## direction: {in, out, inout}
#ytick.minor.visible : False   ## visibility of minor ticks on y-axis
#ytick.major.left    : True    ## draw y axis left major ticks
#ytick.major.right   : True    ## draw y axis right major ticks
#ytick.minor.left    : True    ## draw y axis left minor ticks
#ytick.minor.right   : True    ## draw y axis right minor ticks
#ytick.alignment     : center_baseline  ## alignment of yticks


## ***************************************************************************
## * GRIDS                                                                   *
## ***************************************************************************
#grid.color     : b0b0b0  ## grid color
#grid.linestyle : -       ## solid
#grid.linewidth : 0.8     ## in points
#grid.alpha     : 1.0     ## transparency, between 0.0 and 1.0


## ***************************************************************************
## * LEGEND                                                                  *
## ***************************************************************************
#legend.loc           : best
#legend.frameon       : True     ## if True, draw the legend on a background patch
#legend.framealpha    : 0.8      ## legend patch transparency
#legend.facecolor     : inherit  ## inherit from axes.facecolor; or color spec
#legend.edgecolor     : 0.8      ## background patch boundary color
#legend.fancybox      : True     ## if True, use a rounded box for the
                                 ## legend background, else a rectangle
#legend.shadow        : False    ## if True, give background a shadow effect
#legend.numpoints     : 1        ## the number of marker points in the legend line
#legend.scatterpoints : 1        ## number of scatter points
#legend.markerscale   : 1.0      ## the relative size of legend markers vs. original
legend.fontsize      : small
legend.title_fontsize : small    ## None sets to the same as the default axes.

## Dimensions as fraction of fontsize:
#legend.borderpad     : 0.4  ## border whitespace
#legend.labelspacing  : 0.5  ## the vertical space between the legend entries
#legend.handlelength  : 2.0  ## the length of the legend lines
#legend.handleheight  : 0.7  ## the height of the legend handle
#legend.handletextpad : 0.8  ## the space between the legend line and legend text
#legend.borderaxespad : 0.5  ## the border between the axes and legend edge
#legend.columnspacing : 2.0  ## column separation


## ***************************************************************************
## * FIGURE                                                                  *
## ***************************************************************************
## See https://matplotlib.org/api/figure_api.html#matplotlib.figure.Figure
figure.titlesize   : large     ## size of the figure title (``Figure.suptitle()``)
#figure.titleweight : normal    ## weight of the figure title
#figure.figsize     : 6.4, 4.8  ## figure size in inches
figure.dpi         : 600       ## figure dots per inch
#figure.facecolor   : white     ## figure facecolor
#figure.edgecolor   : white     ## figure edgecolor
#figure.frameon     : True      ## enable figure frame
#figure.max_open_warning : 20   ## The maximum number of figures to open through
                                ## the pyplot interface before emitting a warning.
                                ## If less than one this feature is disabled.

## The figure subplot parameters.  All dimensions are a fraction of the figure width and height.
#figure.subplot.left   : 0.125  ## the left side of the subplots of the figure
#figure.subplot.right  : 0.9    ## the right side of the subplots of the figure
#figure.subplot.bottom : 0.11   ## the bottom of the subplots of the figure
#figure.subplot.top    : 0.88   ## the top of the subplots of the figure
#figure.subplot.wspace : 0.2    ## the amount of width reserved for space between subplots,
                                ## expressed as a fraction of the average axis width
#figure.subplot.hspace : 0.2    ## the amount of height reserved for space between subplots,
                                ## expressed as a fraction of the average axis height

## Figure layout
#figure.autolayout : False  ## When True, automatically adjust subplot
                            ## parameters to make the plot fit the figure
                            ## using `tight_layout`
figure.constrained_layout.use : True  ## When True, automatically make plot
                                        ## elements fit on the figure. (Not
                                        ## compatible with `autolayout`, above).
#figure.constrained_layout.h_pad  : 0.04167  ## Padding around axes objects. Float representing
#figure.constrained_layout.w_pad  : 0.04167  ## inches. Default is 3./72. inches (3 pts)
#figure.constrained_layout.hspace : 0.02     ## Space between subplot groups. Float representing
#figure.constrained_layout.wspace : 0.02     ## a fraction of the subplot widths being separated.


## ***************************************************************************
## * IMAGES                                                                  *
## ***************************************************************************
#image.aspect : equal            ## {equal, auto} or a number
#image.interpolation  : antialiased  ## see help(imshow) for options
#image.cmap   : viridis          ## A colormap name, gray etc...
#image.lut    : 256              ## the size of the colormap lookup table
#image.origin : upper            ## {lower, upper}
#image.resample  : True
#image.composite_image : True  ## When True, all the images on a set of axes are
                               ## combined into a single composite image before
                               ## saving a figure as a vector graphics file,
                               ## such as a PDF.


## ***************************************************************************
## * CONTOUR PLOTS                                                           *
## ***************************************************************************
#contour.negative_linestyle : dashed  ## string or on-off ink sequence
#contour.corner_mask        : True    ## {True, False, legacy}


## ***************************************************************************
## * ERRORBAR PLOTS                                                          *
## ***************************************************************************
#errorbar.capsize : 0  ## length of end cap on error bars in pixels


## ***************************************************************************
## * HISTOGRAM PLOTS                                                         *
## ***************************************************************************
#hist.bins : 10  ## The default number of histogram bins or 'auto'.


## ***************************************************************************
## * SCATTER PLOTS                                                           *
## ***************************************************************************
#scatter.marker : o         ## The default marker type for scatter plots.
#scatter.edgecolors : face  ## The default edge colors for scatter plots.


## ***************************************************************************
## * AGG RENDERING                                                           *
## ***************************************************************************
## Warning: experimental, 2008/10/10
#agg.path.chunksize : 0  ## 0 to disable; values in the range
                         ## 10000 to 100000 can improve speed slightly
                         ## and prevent an Agg rendering failure
                         ## when plotting very large data sets,
                         ## especially if they are very gappy.
                         ## It may cause minor artifacts, though.
                         ## A value of 20000 is probably a good
                         ## starting point.


## ***************************************************************************
## * PATHS                                                                   *
## ***************************************************************************
#path.simplify : True  ## When True, simplify paths by removing "invisible"
                       ## points to reduce file size and increase rendering
                       ## speed
#path.simplify_threshold : 0.111111111111  ## The threshold of similarity below
                                           ## which vertices will be removed in
                                           ## the simplification process.
#path.snap : True  ## When True, rectilinear axis-aligned paths will be snapped
                   ## to the nearest pixel when certain criteria are met.
                   ## When False, paths will never be snapped.
#path.sketch : None  ## May be None, or a 3-tuple of the form:
                     ## (scale, length, randomness).
                     ##     - *scale* is the amplitude of the wiggle
                     ##         perpendicular to the line (in pixels).
                     ##     - *length* is the length of the wiggle along the
                     ##         line (in pixels).
                     ##     - *randomness* is the factor by which the length is
                     ##         randomly scaled.
#path.effects : []   ##


## ***************************************************************************
## * SAVING FIGURES                                                          *
## ***************************************************************************
## The default savefig params can be different from the display params
## e.g., you may want a higher resolution, or to make the figure
## background white
#savefig.dpi       : figure      ## figure dots per inch or 'figure'
#savefig.facecolor : white       ## figure facecolor when saving
#savefig.edgecolor : white       ## figure edgecolor when saving
#savefig.format    : png         ## {png, ps, pdf, svg}
savefig.bbox      : tight    ## {tight, standard}
                                 ## 'tight' is incompatible with pipe-based animation
                                 ## backends but will workd with temporary file based ones:
                                 ## e.g. setting animation.writer to ffmpeg will not work,
                                 ## use ffmpeg_file instead
#savefig.pad_inches   : 0.1      ## Padding to be used when bbox is set to 'tight'
#savefig.jpeg_quality : 95       ## when a jpeg is saved, the default quality parameter.
#savefig.directory    : ~        ## default directory in savefig dialog box,
                                 ## leave empty to always use current working directory
#savefig.transparent : False     ## setting that controls whether figures are saved with a
                                 ## transparent background by default
#savefig.orientation : portrait  ## Orientation of saved figure

### tk backend params
#tk.window_focus   : False  ## Maintain shell focus for TkAgg

### ps backend params
#ps.papersize      : letter  ## {auto, letter, legal, ledger, A0-A10, B0-B10}
#ps.useafm         : False   ## use of afm fonts, results in small files
#ps.usedistiller   : False   ## {ghostscript, xpdf, None}
                             ## Experimental: may produce smaller files.
                             ## xpdf intended for production of publication quality files,
                             ## but requires ghostscript, xpdf and ps2eps
#ps.distiller.res  : 6000    ## dpi
#ps.fonttype       : 3       ## Output Type 3 (Type3) or Type 42 (TrueType)

### PDF backend params
#pdf.compression    : 6  ## integer from 0 to 9
                         ## 0 disables compression (good for debugging)
#pdf.fonttype       : 3  ## Output Type 3 (Type3) or Type 42 (TrueType)
#pdf.use14corefonts : False
#pdf.inheritcolor   : False

### SVG backend params
#svg.image_inline : True  ## Write raster image data directly into the SVG file
#svg.fonttype : path      ## How to handle SVG fonts:
                          ##     path: Embed characters as paths -- supported
                          ##           by most SVG renderers
                          ##     None: Assume fonts are installed on the
                          ##           machine where the SVG will be viewed.
#svg.hashsalt : None      ## If not None, use this string as hash salt instead of uuid4

### pgf parameter
## See https://matplotlib.org/tutorials/text/pgf.html for more information.
#pgf.rcfonts : True
#pgf.preamble :          ## See text.latex.preamble for documentation
#pgf.texsystem : xelatex

### docstring params
##docstring.hardcopy = False  ## set this when you want to generate hardcopy docstring


## ***************************************************************************
## * INTERACTIVE KEYMAPS                                                     *
## ***************************************************************************
## Event keys to interact with figures/plots via keyboard.
## See https://matplotlib.org/users/navigation_toolbar.html for more details on
## interactive navigation.  Customize these settings according to your needs.
## Leave the field(s) empty if you don't need a key-map. (i.e., fullscreen : '')
#keymap.fullscreen : f, ctrl+f   ## toggling
#keymap.home : h, r, home        ## home or reset mnemonic
#keymap.back : left, c, backspace, MouseButton.BACK  ## forward / backward keys
#keymap.forward : right, v, MouseButton.FORWARD      ## for quick navigation
#keymap.pan : p                  ## pan mnemonic
#keymap.zoom : o                 ## zoom mnemonic
#keymap.save : s, ctrl+s         ## saving current figure
#keymap.help : f1                ## display help about active tools
#keymap.quit : ctrl+w, cmd+w, q  ## close the current figure
#keymap.quit_all : W, cmd+W, Q   ## close all figures
#keymap.grid : g                 ## switching on/off major grids in current axes
#keymap.grid_minor : G           ## switching on/off minor grids in current axes
#keymap.yscale : l               ## toggle scaling of y-axes ('log'/'linear')
#keymap.xscale : k, L            ## toggle scaling of x-axes ('log'/'linear')
#keymap.all_axes : a             ## enable all axes
#keymap.copy : ctrl+c, cmd+c     ## Copy figure to clipboard


## ***************************************************************************
## * ANIMATION                                                               *
## ***************************************************************************
#animation.html : none  ## How to display the animation as HTML in
                        ## the IPython notebook:
                        ##     - 'html5' uses HTML5 video tag
                        ##     - 'jshtml' creates a Javascript animation
#animation.writer  : ffmpeg  ## MovieWriter 'backend' to use
#animation.codec   : h264    ## Codec to use for writing movie
#animation.bitrate : -1      ## Controls size/quality tradeoff for movie.
                             ## -1 implies let utility auto-determine
#animation.frame_format : png      ## Controls frame format used by temp files
#animation.html_args    :          ## Additional arguments to pass to html writer
#animation.ffmpeg_path  : ffmpeg   ## Path to ffmpeg binary. Without full path
                                   ## $PATH is searched
#animation.ffmpeg_args  :          ## Additional arguments to pass to ffmpeg
#animation.avconv_path  : avconv   ## Path to avconv binary. Without full path
                                   ## $PATH is searched
#animation.avconv_args  :          ## Additional arguments to pass to avconv
#animation.convert_path : convert  ## Path to ImageMagick's convert binary.
                                   ## On Windows use the full path since convert
                                   ## is also the name of a system tool.
#animation.convert_args :          ## Additional arguments to pass to convert
#animation.embed_limit  : 20.0     ## Limit, in MB, of size of base64 encoded
                                   ## animation in HTML (i.e. IPython notebook)

#mpl_toolkits.legacy_colorbar: True