Feature request; No way to remotely change filament

[Escrich]

Dear all, I'm starting to use Prusa Link and Prusa connect, but I'm used to control all my other printers form my desktop computer, in the case of my Prusa, I'm not able to load or unload filament in a single operation, and I need to do it.

Just referring the filament change, even remote or locally, we really don't need to heat up the bed to change filament, sometimes we only want to move the reel to a different printer, or to a storage bin, anyway we don't need to waste energy warming the bed.

[3d-gussner]

@Escrich Which Prusa printer are you using? This repository is for the MK2.5/S and MK3/S/+ 8-bit printers with PrusaLink running on a SBC or other Linux device.

In case you have an MINI, MK3.5/S, MK3.9/S, MK4/S or XL please close this issue ticket here and open a new one in the Buddy firmware repository https://github.com/prusa3d/Prusa-Firmware-Buddy

Just referring the filament change, even remote or locally, we really don't need to heat up the bed to change filament, sometimes we only want to move the reel to a different printer, or to a storage bin, anyway we don't need to waste energy warming the bed.

On MK3S you can set in LCD menu Settings -> HBed on load to [No] and load and unload will not heat up the bed. Hope that helps.

[Escrich]

@Escrich Which Prusa printer are you using? This repository is for the MK2.5/S and MK3/S/+ 8-bit printers with PrusaLink running on a SBC or other Linux device.

In case you have an MINI, MK3.5/S, MK3.9/S, MK4/S or XL please close this issue ticket here and open a new one in the Buddy firmware repository https://github.com/prusa3d/Prusa-Firmware-Buddy

Just referring the filament change, even remote or locally, we really don't need to heat up the bed to change filament, sometimes we only want to move the reel to a different printer, or to a storage bin, anyway we don't need to waste energy warming the bed.

On MK3S you can set in LCD menu Settings -> HBed on load to [No] and load and unload will not heat up the bed. Hope that helps.

My printer is an Original Prusa i3 Mk3s, running a Raspberry Pi Zero 2W, plugged on it

[Escrich]

--- On MK3S you can set in LCD menu Settings -> HBed on load to [No] and load and unload will not heat up the bed. Hope that helps.

Thanks for that, that's true, now has been done, thanks again.

[Escrich]

Still no way to change remotely filament, no way for load or unload it from the web interface