spec of the front LEDs?

[KeLaiFu]

I'm working through getting the boards made and just noticed there's no spec for the LEDs on the front panel. I'm going to try and get PCBway to do the hard work soldering them, so the model number would be very useful!

also, just to confirm, the front panel to use is the one with LPZW in the file name?

Thanks

[ijnekenamay]

Hi,KeLaiFU.
I don't know if this will help, but I stared at footprint and decided to buy generic 0603 blue and white chip LEDs from Aliexpress.
It probably won't be a problem, but I will let you know here if any discrepancies arise!
https://ja.aliexpress.com/item/1005003836509392.html

[KeLaiFu]

I just found out these are the ones used in the original module:
https://www.digikey.co.uk/en/products/detail/inolux/IN-S124ARB/7604658

[mmalex]

people have used all sorts of leds and it pretty much always works! the leds are the same ones as in the expander which has a bom listing the parts. its 1105 or 1106 size but you can get about anything to work, ive seen purples reds oranges… rainbows… sorry i need to add a bom to this repo too for the thruhole parts

…

On Wed, 19 Jul 2023 at 10:23, KeLaiFu ***@***.***> wrote: I just found out these are the ones used in the original module: https://www.digikey.co.uk/en/products/detail/inolux/IN-S124ARB/7604658 — Reply to this email directly, view it on GitHub <#2 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFOYTYM7U2SY45RG6JW3O3XQ6RSHANCNFSM6AAAAAA2OJ2UPM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>