A Node-RED node to control a PiBorg LedBorg baord for a Raspberry Pi.
Run the following command in the root directory of your Node-RED install
npm install node-red-node-ledborg
A PiBorg LedBorg LED output node that expects a msg.payload with a three digit rgb triple, from 000 to 222. I.E. there are only 27 possible colours.
See the PiBorg site for more information.
You can also now use a msg.payload in the standard hex format "#rrggbb". The clip levels are :
0x00 - 0x57 = off
0x58 - 0xA7 = 50%
0xA8 - 0xFF = fully on
You can also use the @cheerlight colour names - red, amber, green, blue, cyan, magenta, yellow, orange, pink, purple, white, warmwhite, black