From 40bc24a9667c6917bd946babe479699befb38321 Mon Sep 17 00:00:00 2001 From: Jim Perkins Date: Mon, 16 Oct 2023 14:05:01 -0500 Subject: [PATCH] Initial Debian bookworm Root on ZFS page (#444) * First update for Bookworm. Copeied Bullseye to Bookworm. s/Bookworm/Bullseye and added the 'Newer Release' to Bullseye. * not all changes made it last time * Most changes except timedatectl and mtab. want to verify with gnome iso install disk * mtab is already included in the chroot env * verification of timedatectl does not work in chroot env due to lack of systemd * there was no option to select disks when installing grub-pc for a bios install --- .../Debian/Debian Bookworm Root on ZFS.rst | 1220 +++++++++++++++++ .../Debian/Debian Bullseye Root on ZFS.rst | 8 + 2 files changed, 1228 insertions(+) create mode 100644 docs/Getting Started/Debian/Debian Bookworm Root on ZFS.rst diff --git a/docs/Getting Started/Debian/Debian Bookworm Root on ZFS.rst b/docs/Getting Started/Debian/Debian Bookworm Root on ZFS.rst new file mode 100644 index 000000000..fce58465f --- /dev/null +++ b/docs/Getting Started/Debian/Debian Bookworm Root on ZFS.rst @@ -0,0 +1,1220 @@ +.. highlight:: sh + +Debian Bookworm Root on ZFS +=========================== + +.. contents:: Table of Contents + :local: + +Overview +-------- + +Caution +~~~~~~~ + +- This HOWTO uses a whole physical disk. +- Do not use these instructions for dual-booting. +- Backup your data. Any existing data will be lost. + +System Requirements +~~~~~~~~~~~~~~~~~~~ + +- `64-bit Debian GNU/Linux Bookworm Live CD w/ GUI (e.g. gnome iso) + `__ +- `A 64-bit kernel is strongly encouraged. + `__ +- Installing on a drive which presents 4 KiB logical sectors (a “4Kn” drive) + only works with UEFI booting. This not unique to ZFS. `GRUB does not and + will not work on 4Kn with legacy (BIOS) booting. + `__ + +Computers that have less than 2 GiB of memory run ZFS slowly. 4 GiB of memory +is recommended for normal performance in basic workloads. If you wish to use +deduplication, you will need `massive amounts of RAM +`__. Enabling +deduplication is a permanent change that cannot be easily reverted. + +Support +~~~~~~~ + +If you need help, reach out to the community using the :ref:`mailing_lists` or IRC at +`#zfsonlinux `__ on `Libera Chat +`__. If you have a bug report or feature request +related to this HOWTO, please `file a new issue and mention @rlaager +`__. + +Contributing +~~~~~~~~~~~~ + +#. Fork and clone: https://github.com/openzfs/openzfs-docs + +#. Install the tools:: + + sudo apt install python3-pip + + pip3 install -r docs/requirements.txt + + # Add ~/.local/bin to your $PATH, e.g. by adding this to ~/.bashrc: + PATH=$HOME/.local/bin:$PATH + +#. Make your changes. + +#. Test:: + + cd docs + make html + sensible-browser _build/html/index.html + +#. ``git commit --signoff`` to a branch, ``git push``, and create a pull + request. Mention @rlaager. + +Encryption +~~~~~~~~~~ + +This guide supports three different encryption options: unencrypted, ZFS +native encryption, and LUKS. With any option, all ZFS features are fully +available. + +Unencrypted does not encrypt anything, of course. With no encryption +happening, this option naturally has the best performance. + +ZFS native encryption encrypts the data and most metadata in the root +pool. It does not encrypt dataset or snapshot names or properties. The +boot pool is not encrypted at all, but it only contains the bootloader, +kernel, and initrd. (Unless you put a password in ``/etc/fstab``, the +initrd is unlikely to contain sensitive data.) The system cannot boot +without the passphrase being entered at the console. Performance is +good. As the encryption happens in ZFS, even if multiple disks (mirror +or raidz topologies) are used, the data only has to be encrypted once. + +LUKS encrypts almost everything. The only unencrypted data is the bootloader, +kernel, and initrd. The system cannot boot without the passphrase being +entered at the console. Performance is good, but LUKS sits underneath ZFS, so +if multiple disks (mirror or raidz topologies) are used, the data has to be +encrypted once per disk. + +Step 1: Prepare The Install Environment +--------------------------------------- + +#. Boot the Debian GNU/Linux Live CD. If prompted, login with the username + ``user`` and password ``live``. Connect your system to the Internet as + appropriate (e.g. join your WiFi network). Open a terminal. + +#. Setup and update the repositories:: + + sudo vi /etc/apt/sources.list + + .. code-block:: sourceslist + + deb http://deb.debian.org/debian bookworm main contrib non-free-firmware + + :: + + sudo apt update + +#. Optional: Install and start the OpenSSH server in the Live CD environment: + + If you have a second system, using SSH to access the target system can be + convenient:: + + sudo apt install --yes openssh-server + + sudo systemctl restart ssh + + **Hint:** You can find your IP address with + ``ip addr show scope global | grep inet``. Then, from your main machine, + connect with ``ssh user@IP``. + +#. Disable automounting: + + If the disk has been used before (with partitions at the same offsets), + previous filesystems (e.g. the ESP) will automount if not disabled:: + + gsettings set org.gnome.desktop.media-handling automount false + +#. Become root:: + + sudo -i + +#. Install ZFS in the Live CD environment:: + + apt install --yes debootstrap gdisk zfsutils-linux + +Step 2: Disk Formatting +----------------------- + +#. Set a variable with the disk name:: + + DISK=/dev/disk/by-id/scsi-SATA_disk1 + + Always use the long ``/dev/disk/by-id/*`` aliases with ZFS. Using the + ``/dev/sd*`` device nodes directly can cause sporadic import failures, + especially on systems that have more than one storage pool. + + **Hints:** + + - ``ls -la /dev/disk/by-id`` will list the aliases. + - Are you doing this in a virtual machine? If your virtual disk is missing + from ``/dev/disk/by-id``, use ``/dev/vda`` if you are using KVM with + virtio. Also when using /dev/vda, the partitions used later will be named + differently. Otherwise, read the `troubleshooting <#troubleshooting>`__ + section. + - For a mirror or raidz topology, use ``DISK1``, ``DISK2``, etc. + - When choosing a boot pool size, consider how you will use the space. A + kernel and initrd may consume around 100M. If you have multiple kernels + and take snapshots, you may find yourself low on boot pool space, + especially if you need to regenerate your initramfs images, which may be + around 85M each. Size your boot pool appropriately for your needs. + +#. If you are re-using a disk, clear it as necessary: + + Ensure swap partitions are not in use:: + + swapoff --all + + If the disk was previously used in an MD array:: + + apt install --yes mdadm + + # See if one or more MD arrays are active: + cat /proc/mdstat + # If so, stop them (replace ``md0`` as required): + mdadm --stop /dev/md0 + + # For an array using the whole disk: + mdadm --zero-superblock --force $DISK + # For an array using a partition: + mdadm --zero-superblock --force ${DISK}-part2 + + If the disk was previously used with zfs:: + + wipefs -a $DISK + + For flash-based storage, if the disk was previously used, you may wish to + do a full-disk discard (TRIM/UNMAP), which can improve performance:: + + blkdiscard -f $DISK + + Clear the partition table:: + + sgdisk --zap-all $DISK + + If you get a message about the kernel still using the old partition table, + reboot and start over (except that you can skip this step). + +#. Partition your disk(s): + + Run this if you need legacy (BIOS) booting:: + + sgdisk -a1 -n1:24K:+1000K -t1:EF02 $DISK + + Run this for UEFI booting (for use now or in the future):: + + sgdisk -n2:1M:+512M -t2:EF00 $DISK + + Run this for the boot pool:: + + sgdisk -n3:0:+1G -t3:BF01 $DISK + + Choose one of the following options: + + - Unencrypted or ZFS native encryption:: + + sgdisk -n4:0:0 -t4:BF00 $DISK + + - LUKS:: + + sgdisk -n4:0:0 -t4:8309 $DISK + + If you are creating a mirror or raidz topology, repeat the partitioning + commands for all the disks which will be part of the pool. + +#. Create the boot pool:: + + zpool create \ + -o ashift=12 \ + -o autotrim=on -d \ + -o cachefile=/etc/zfs/zpool.cache \ + -o feature@async_destroy=enabled \ + -o feature@bookmarks=enabled \ + -o feature@embedded_data=enabled \ + -o feature@empty_bpobj=enabled \ + -o feature@enabled_txg=enabled \ + -o feature@extensible_dataset=enabled \ + -o feature@filesystem_limits=enabled \ + -o feature@hole_birth=enabled \ + -o feature@large_blocks=enabled \ + -o feature@livelist=enabled \ + -o feature@lz4_compress=enabled \ + -o feature@spacemap_histogram=enabled \ + -o feature@zpool_checkpoint=enabled \ + -O devices=off \ + -O acltype=posixacl -O xattr=sa \ + -O compression=lz4 \ + -O normalization=formD \ + -O relatime=on \ + -O canmount=off -O mountpoint=/boot -R /mnt \ + bpool ${DISK}-part3 + + You should not need to customize any of the options for the boot pool. + + GRUB does not support all of the zpool features. See ``spa_feature_names`` + in `grub-core/fs/zfs/zfs.c + `__. + This step creates a separate boot pool for ``/boot`` with the features + limited to only those that GRUB supports, allowing the root pool to use + any/all features. Note that GRUB opens the pool read-only, so all + read-only compatible features are “supported” by GRUB. + + **Hints:** + + - If you are creating a mirror topology, create the pool using:: + + zpool create \ + ... \ + bpool mirror \ + /dev/disk/by-id/scsi-SATA_disk1-part3 \ + /dev/disk/by-id/scsi-SATA_disk2-part3 + + - For raidz topologies, replace ``mirror`` in the above command with + ``raidz``, ``raidz2``, or ``raidz3`` and list the partitions from + the additional disks. + - The pool name is arbitrary. If changed, the new name must be used + consistently. The ``bpool`` convention originated in this HOWTO. + + **Feature Notes:** + + - The ``allocation_classes`` feature should be safe to use. However, unless + one is using it (i.e. a ``special`` vdev), there is no point to enabling + it. It is extremely unlikely that someone would use this feature for a + boot pool. If one cares about speeding up the boot pool, it would make + more sense to put the whole pool on the faster disk rather than using it + as a ``special`` vdev. + - The ``device_rebuild`` feature should be safe to use (except on raidz, + which it is incompatible with), but the boot pool is small, so this does + not matter in practice. + - The ``log_spacemap`` and ``spacemap_v2`` features have been tested and + are safe to use. The boot pool is small, so these do not matter in + practice. + - The ``project_quota`` feature has been tested and is safe to use. This + feature is extremely unlikely to matter for the boot pool. + - The ``resilver_defer`` should be safe but the boot pool is small enough + that it is unlikely to be necessary. + - As a read-only compatible feature, the ``userobj_accounting`` feature + should be compatible in theory, but in practice, GRUB can fail with an + “invalid dnode type” error. This feature does not matter for ``/boot`` + anyway. + +#. Create the root pool: + + Choose one of the following options: + + - Unencrypted:: + + zpool create \ + -o ashift=12 \ + -o autotrim=on \ + -O acltype=posixacl -O xattr=sa -O dnodesize=auto \ + -O compression=lz4 \ + -O normalization=formD \ + -O relatime=on \ + -O canmount=off -O mountpoint=/ -R /mnt \ + rpool ${DISK}-part4 + + - ZFS native encryption:: + + zpool create \ + -o ashift=12 \ + -o autotrim=on \ + -O encryption=on -O keylocation=prompt -O keyformat=passphrase \ + -O acltype=posixacl -O xattr=sa -O dnodesize=auto \ + -O compression=lz4 \ + -O normalization=formD \ + -O relatime=on \ + -O canmount=off -O mountpoint=/ -R /mnt \ + rpool ${DISK}-part4 + + - LUKS:: + + apt install --yes cryptsetup + + cryptsetup luksFormat -c aes-xts-plain64 -s 512 -h sha256 ${DISK}-part4 + cryptsetup luksOpen ${DISK}-part4 luks1 + zpool create \ + -o ashift=12 \ + -o autotrim=on \ + -O acltype=posixacl -O xattr=sa -O dnodesize=auto \ + -O compression=lz4 \ + -O normalization=formD \ + -O relatime=on \ + -O canmount=off -O mountpoint=/ -R /mnt \ + rpool /dev/mapper/luks1 + + **Notes:** + + - The use of ``ashift=12`` is recommended here because many drives + today have 4 KiB (or larger) physical sectors, even though they + present 512 B logical sectors. Also, a future replacement drive may + have 4 KiB physical sectors (in which case ``ashift=12`` is desirable) + or 4 KiB logical sectors (in which case ``ashift=12`` is required). + - Setting ``-O acltype=posixacl`` enables POSIX ACLs globally. If you + do not want this, remove that option, but later add + ``-o acltype=posixacl`` (note: lowercase “o”) to the ``zfs create`` + for ``/var/log``, as `journald requires ACLs + `__ + - Setting ``xattr=sa`` `vastly improves the performance of extended + attributes + `__. + Inside ZFS, extended attributes are used to implement POSIX ACLs. + Extended attributes can also be used by user-space applications. + `They are used by some desktop GUI applications. + `__ + `They can be used by Samba to store Windows ACLs and DOS attributes; + they are required for a Samba Active Directory domain controller. + `__ + Note that ``xattr=sa`` is `Linux-specific + `__. If you move your + ``xattr=sa`` pool to another OpenZFS implementation besides ZFS-on-Linux, + extended attributes will not be readable (though your data will be). If + portability of extended attributes is important to you, omit the + ``-O xattr=sa`` above. Even if you do not want ``xattr=sa`` for the whole + pool, it is probably fine to use it for ``/var/log``. + - Setting ``normalization=formD`` eliminates some corner cases relating + to UTF-8 filename normalization. It also implies ``utf8only=on``, + which means that only UTF-8 filenames are allowed. If you care to + support non-UTF-8 filenames, do not use this option. For a discussion + of why requiring UTF-8 filenames may be a bad idea, see `The problems + with enforced UTF-8 only filenames + `__. + - ``recordsize`` is unset (leaving it at the default of 128 KiB). If you + want to tune it (e.g. ``-O recordsize=1M``), see `these + `__ `various + `__ `blog + `__ + `posts + `__. + - Setting ``relatime=on`` is a middle ground between classic POSIX + ``atime`` behavior (with its significant performance impact) and + ``atime=off`` (which provides the best performance by completely + disabling atime updates). Since Linux 2.6.30, ``relatime`` has been + the default for other filesystems. See `RedHat’s documentation + `__ + for further information. + - Make sure to include the ``-part4`` portion of the drive path. If you + forget that, you are specifying the whole disk, which ZFS will then + re-partition, and you will lose the bootloader partition(s). + - ZFS native encryption `now + `__ + defaults to ``aes-256-gcm``. + - For LUKS, the key size chosen is 512 bits. However, XTS mode requires two + keys, so the LUKS key is split in half. Thus, ``-s 512`` means AES-256. + - Your passphrase will likely be the weakest link. Choose wisely. See + `section 5 of the cryptsetup FAQ + `__ + for guidance. + + **Hints:** + + - If you are creating a mirror topology, create the pool using:: + + zpool create \ + ... \ + rpool mirror \ + /dev/disk/by-id/scsi-SATA_disk1-part4 \ + /dev/disk/by-id/scsi-SATA_disk2-part4 + + - For raidz topologies, replace ``mirror`` in the above command with + ``raidz``, ``raidz2``, or ``raidz3`` and list the partitions from + the additional disks. + - When using LUKS with mirror or raidz topologies, use + ``/dev/mapper/luks1``, ``/dev/mapper/luks2``, etc., which you will have + to create using ``cryptsetup``. + - The pool name is arbitrary. If changed, the new name must be used + consistently. On systems that can automatically install to ZFS, the root + pool is named ``rpool`` by default. + +Step 3: System Installation +--------------------------- + +#. Create filesystem datasets to act as containers:: + + zfs create -o canmount=off -o mountpoint=none rpool/ROOT + zfs create -o canmount=off -o mountpoint=none bpool/BOOT + + On Solaris systems, the root filesystem is cloned and the suffix is + incremented for major system changes through ``pkg image-update`` or + ``beadm``. Similar functionality was implemented in Ubuntu with the + ``zsys`` tool, though its dataset layout is more complicated, and ``zsys`` + `is on life support + `__. Even + without such a tool, the `rpool/ROOT` and `bpool/BOOT` containers can still + be used for manually created clones. That said, this HOWTO assumes a single + filesystem for ``/boot`` for simplicity. + +#. Create filesystem datasets for the root and boot filesystems:: + + zfs create -o canmount=noauto -o mountpoint=/ rpool/ROOT/debian + zfs mount rpool/ROOT/debian + + zfs create -o mountpoint=/boot bpool/BOOT/debian + + With ZFS, it is not normally necessary to use a mount command (either + ``mount`` or ``zfs mount``). This situation is an exception because of + ``canmount=noauto``. + +#. Create datasets:: + + zfs create rpool/home + zfs create -o mountpoint=/root rpool/home/root + chmod 700 /mnt/root + zfs create -o canmount=off rpool/var + zfs create -o canmount=off rpool/var/lib + zfs create rpool/var/log + zfs create rpool/var/spool + + The datasets below are optional, depending on your preferences and/or + software choices. + + If you wish to separate these to exclude them from snapshots:: + + zfs create -o com.sun:auto-snapshot=false rpool/var/cache + zfs create -o com.sun:auto-snapshot=false rpool/var/lib/nfs + zfs create -o com.sun:auto-snapshot=false rpool/var/tmp + chmod 1777 /mnt/var/tmp + + If you use /srv on this system:: + + zfs create rpool/srv + + If you use /usr/local on this system:: + + zfs create -o canmount=off rpool/usr + zfs create rpool/usr/local + + If this system will have games installed:: + + zfs create rpool/var/games + + If this system will have a GUI:: + + zfs create rpool/var/lib/AccountsService + zfs create rpool/var/lib/NetworkManager + + If this system will use Docker (which manages its own datasets & + snapshots):: + + zfs create -o com.sun:auto-snapshot=false rpool/var/lib/docker + + If this system will store local email in /var/mail:: + + zfs create rpool/var/mail + + If this system will use Snap packages:: + + zfs create rpool/var/snap + + If you use /var/www on this system:: + + zfs create rpool/var/www + + A tmpfs is recommended later, but if you want a separate dataset for + ``/tmp``:: + + zfs create -o com.sun:auto-snapshot=false rpool/tmp + chmod 1777 /mnt/tmp + + The primary goal of this dataset layout is to separate the OS from user + data. This allows the root filesystem to be rolled back without rolling + back user data. + + If you do nothing extra, ``/tmp`` will be stored as part of the root + filesystem. Alternatively, you can create a separate dataset for ``/tmp``, + as shown above. This keeps the ``/tmp`` data out of snapshots of your root + filesystem. It also allows you to set a quota on ``rpool/tmp``, if you want + to limit the maximum space used. Otherwise, you can use a tmpfs (RAM + filesystem) later. + + **Note:** If you separate a directory required for booting (e.g. ``/etc``) + into its own dataset, you must add it to + ``ZFS_INITRD_ADDITIONAL_DATASETS`` in ``/etc/default/zfs``. Datasets + with ``canmount=off`` (like ``rpool/usr`` above) do not matter for this. + +#. Mount a tmpfs at /run:: + + mkdir /mnt/run + mount -t tmpfs tmpfs /mnt/run + mkdir /mnt/run/lock + +#. Install the minimal system:: + + debootstrap bookworm /mnt + + The ``debootstrap`` command leaves the new system in an unconfigured state. + An alternative to using ``debootstrap`` is to copy the entirety of a + working system into the new ZFS root. + +#. Copy in zpool.cache:: + + mkdir /mnt/etc/zfs + cp /etc/zfs/zpool.cache /mnt/etc/zfs/ + +Step 4: System Configuration +---------------------------- + +#. Configure the hostname: + + Replace ``HOSTNAME`` with the desired hostname:: + + hostname HOSTNAME + hostname > /mnt/etc/hostname + vi /mnt/etc/hosts + + .. code-block:: text + + Add a line: + 127.0.1.1 HOSTNAME + or if the system has a real name in DNS: + 127.0.1.1 FQDN HOSTNAME + + **Hint:** Use ``nano`` if you find ``vi`` confusing. + +#. Configure the network interface: + + Find the interface name:: + + ip addr show + + Adjust ``NAME`` below to match your interface name:: + + vi /mnt/etc/network/interfaces.d/NAME + + .. code-block:: text + + auto NAME + iface NAME inet dhcp + + Customize this file if the system is not a DHCP client. + +#. Configure the package sources:: + + vi /mnt/etc/apt/sources.list + + .. code-block:: sourceslist + + deb http://deb.debian.org/debian bookworm main contrib non-free-firmware + deb-src http://deb.debian.org/debian bookworm main contrib non-free-firmware + + deb http://deb.debian.org/debian-security bookworm-security main contrib non-free-firmware + deb-src http://deb.debian.org/debian-security bookworm-security main contrib non-free-firmware + + deb http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware + deb-src http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware + +#. Bind the virtual filesystems from the LiveCD environment to the new + system and ``chroot`` into it:: + + mount --make-private --rbind /dev /mnt/dev + mount --make-private --rbind /proc /mnt/proc + mount --make-private --rbind /sys /mnt/sys + chroot /mnt /usr/bin/env DISK=$DISK bash --login + + **Note:** This is using ``--rbind``, not ``--bind``. + +#. Configure a basic system environment:: + + apt update + + apt install --yes console-setup locales + + Even if you prefer a non-English system language, always ensure that + ``en_US.UTF-8`` is available:: + + dpkg-reconfigure locales tzdata keyboard-configuration console-setup + +#. Install ZFS in the chroot environment for the new system:: + + apt install --yes dpkg-dev linux-headers-generic linux-image-generic + + apt install --yes zfs-initramfs + + echo REMAKE_INITRD=yes > /etc/dkms/zfs.conf + + **Note:** Ignore any error messages saying ``ERROR: Couldn't resolve + device`` and ``WARNING: Couldn't determine root device``. `cryptsetup does + not support ZFS + `__. + +#. For LUKS installs only, setup ``/etc/crypttab``:: + + apt install --yes cryptsetup cryptsetup-initramfs + + echo luks1 /dev/disk/by-uuid/$(blkid -s UUID -o value ${DISK}-part4) \ + none luks,discard,initramfs > /etc/crypttab + + The use of ``initramfs`` is a work-around for `cryptsetup does not support + ZFS `__. + + **Hint:** If you are creating a mirror or raidz topology, repeat the + ``/etc/crypttab`` entries for ``luks2``, etc. adjusting for each disk. + +#. Install an NTP service to synchronize time. + This step is specific to Bookworm which does not install the package during + bootstrap. + Although this step is not necessary for ZFS, it is useful for internet + browsing where local clock drift can cause login failures:: + + apt install systemd-timesyncd + +#. Install GRUB + + Choose one of the following options: + + - Install GRUB for legacy (BIOS) booting:: + + apt install --yes grub-pc + + + - Install GRUB for UEFI booting:: + + apt install dosfstools + + mkdosfs -F 32 -s 1 -n EFI ${DISK}-part2 + mkdir /boot/efi + echo /dev/disk/by-uuid/$(blkid -s UUID -o value ${DISK}-part2) \ + /boot/efi vfat defaults 0 0 >> /etc/fstab + mount /boot/efi + apt install --yes grub-efi-amd64 shim-signed + + **Notes:** + + - The ``-s 1`` for ``mkdosfs`` is only necessary for drives which present + 4 KiB logical sectors (“4Kn” drives) to meet the minimum cluster size + (given the partition size of 512 MiB) for FAT32. It also works fine on + drives which present 512 B sectors. + - For a mirror or raidz topology, this step only installs GRUB on the + first disk. The other disk(s) will be handled later. + +#. Optional: Remove os-prober:: + + apt purge --yes os-prober + + This avoids error messages from `update-grub`. `os-prober` is only + necessary in dual-boot configurations. + +#. Set a root password:: + + passwd + +#. Enable importing bpool + + This ensures that ``bpool`` is always imported, regardless of whether + ``/etc/zfs/zpool.cache`` exists, whether it is in the cachefile or not, + or whether ``zfs-import-scan.service`` is enabled. + + :: + + vi /etc/systemd/system/zfs-import-bpool.service + + .. code-block:: ini + + [Unit] + DefaultDependencies=no + Before=zfs-import-scan.service + Before=zfs-import-cache.service + + [Service] + Type=oneshot + RemainAfterExit=yes + ExecStart=/sbin/zpool import -N -o cachefile=none bpool + # Work-around to preserve zpool cache: + ExecStartPre=-/bin/mv /etc/zfs/zpool.cache /etc/zfs/preboot_zpool.cache + ExecStartPost=-/bin/mv /etc/zfs/preboot_zpool.cache /etc/zfs/zpool.cache + + [Install] + WantedBy=zfs-import.target + + :: + + systemctl enable zfs-import-bpool.service + + **Note:** For some disk configurations (NVMe?), this service `may fail + `__ with an error + indicating that the ``bpool`` cannot be found. If this happens, add + ``-d DISK-part3`` (replace ``DISK`` with the correct device path) to the + ``zpool import`` command. + +#. Optional (but recommended): Mount a tmpfs to ``/tmp`` + + If you chose to create a ``/tmp`` dataset above, skip this step, as they + are mutually exclusive choices. Otherwise, you can put ``/tmp`` on a + tmpfs (RAM filesystem) by enabling the ``tmp.mount`` unit. + + :: + + cp /usr/share/systemd/tmp.mount /etc/systemd/system/ + systemctl enable tmp.mount + +#. Optional: Install SSH:: + + apt install --yes openssh-server + + vi /etc/ssh/sshd_config + # Set: PermitRootLogin yes + +#. Optional: For ZFS native encryption or LUKS, configure Dropbear for remote + unlocking:: + + apt install --yes --no-install-recommends dropbear-initramfs + mkdir -p /etc/dropbear/initramfs + + # Optional: Convert OpenSSH server keys for Dropbear + for type in ecdsa ed25519 rsa ; do + cp /etc/ssh/ssh_host_${type}_key /tmp/openssh.key + ssh-keygen -p -N "" -m PEM -f /tmp/openssh.key + dropbearconvert openssh dropbear \ + /tmp/openssh.key \ + /etc/dropbear/initramfs/dropbear_${type}_host_key + done + rm /tmp/openssh.key + + # Add user keys in the same format as ~/.ssh/authorized_keys + vi /etc/dropbear/initramfs/authorized_keys + + # If using a static IP, set it for the initramfs environment: + vi /etc/initramfs-tools/initramfs.conf + # The syntax is: IP=ADDRESS::GATEWAY:MASK:HOSTNAME:NIC + # For example: + # IP=192.168.1.100::192.168.1.1:255.255.255.0:myhostname:ens3 + # HOSTNAME and NIC are optional. + + # Rebuild the initramfs (required when changing any of the above): + update-initramfs -u -k all + + **Notes:** + + - Converting the server keys makes Dropbear use the same keys as OpenSSH, + avoiding host key mismatch warnings. Currently, `dropbearconvert doesn't + understand the new OpenSSH private key format + `__, so the + keys need to be converted to the old PEM format first using + ``ssh-keygen``. The downside of using the same keys for both OpenSSH and + Dropbear is that the OpenSSH keys are then available on-disk, unencrypted + in the initramfs. + - Later, to use this functionality, SSH to the system (as root) while it is + prompting for the passphrase during the boot process. For ZFS native + encryption, run ``zfsunlock``. For LUKS, run ``cryptroot-unlock``. + - You can optionally add ``command="/usr/bin/zfsunlock"`` or + ``command="/bin/cryptroot-unlock"`` in front of the ``authorized_keys`` + line to force the unlock command. This way, the unlock command runs + automatically and is all that can be run. + +#. Optional (but kindly requested): Install popcon + + The ``popularity-contest`` package reports the list of packages install + on your system. Showing that ZFS is popular may be helpful in terms of + long-term attention from the distro. + + :: + + apt install --yes popularity-contest + + Choose Yes at the prompt. + +Step 5: GRUB Installation +------------------------- + +#. Verify that the ZFS boot filesystem is recognized:: + + grub-probe /boot + +#. Refresh the initrd files:: + + update-initramfs -c -k all + + **Note:** Ignore any error messages saying ``ERROR: Couldn't resolve + device`` and ``WARNING: Couldn't determine root device``. `cryptsetup + does not support ZFS + `__. + +#. Workaround GRUB's missing zpool-features support:: + + vi /etc/default/grub + # Set: GRUB_CMDLINE_LINUX="root=ZFS=rpool/ROOT/debian" + +#. Optional (but highly recommended): Make debugging GRUB easier:: + + vi /etc/default/grub + # Remove quiet from: GRUB_CMDLINE_LINUX_DEFAULT + # Uncomment: GRUB_TERMINAL=console + # Save and quit. + + Later, once the system has rebooted twice and you are sure everything is + working, you can undo these changes, if desired. + +#. Update the boot configuration:: + + update-grub + + **Note:** Ignore errors from ``osprober``, if present. + +#. Install the boot loader: + + #. For legacy (BIOS) booting, install GRUB to the MBR:: + + grub-install $DISK + + Note that you are installing GRUB to the whole disk, not a partition. + + If you are creating a mirror or raidz topology, repeat the ``grub-install`` + command for each disk in the pool. + + #. For UEFI booting, install GRUB to the ESP:: + + grub-install --target=x86_64-efi --efi-directory=/boot/efi \ + --bootloader-id=debian --recheck --no-floppy + + It is not necessary to specify the disk here. If you are creating a + mirror or raidz topology, the additional disks will be handled later. + +#. Fix filesystem mount ordering: + + We need to activate ``zfs-mount-generator``. This makes systemd aware of + the separate mountpoints, which is important for things like ``/var/log`` + and ``/var/tmp``. In turn, ``rsyslog.service`` depends on ``var-log.mount`` + by way of ``local-fs.target`` and services using the ``PrivateTmp`` feature + of systemd automatically use ``After=var-tmp.mount``. + + :: + + mkdir /etc/zfs/zfs-list.cache + touch /etc/zfs/zfs-list.cache/bpool + touch /etc/zfs/zfs-list.cache/rpool + zed -F & + + Verify that ``zed`` updated the cache by making sure these are not empty:: + + cat /etc/zfs/zfs-list.cache/bpool + cat /etc/zfs/zfs-list.cache/rpool + + If either is empty, force a cache update and check again:: + + zfs set canmount=on bpool/BOOT/debian + zfs set canmount=noauto rpool/ROOT/debian + + If they are still empty, stop zed (as below), start zed (as above) and try + again. + + Once the files have data, stop ``zed``:: + + fg + Press Ctrl-C. + + Fix the paths to eliminate ``/mnt``:: + + sed -Ei "s|/mnt/?|/|" /etc/zfs/zfs-list.cache/* + +Step 6: First Boot +------------------ + +#. Optional: Snapshot the initial installation:: + + zfs snapshot bpool/BOOT/debian@install + zfs snapshot rpool/ROOT/debian@install + + In the future, you will likely want to take snapshots before each + upgrade, and remove old snapshots (including this one) at some point to + save space. + +#. Exit from the ``chroot`` environment back to the LiveCD environment:: + + exit + +#. Run these commands in the LiveCD environment to unmount all + filesystems:: + + mount | grep -v zfs | tac | awk '/\/mnt/ {print $3}' | \ + xargs -i{} umount -lf {} + zpool export -a + +#. If this fails for rpool, mounting it on boot will fail and you will need to + ``zpool import -f rpool``, then ``exit`` in the initamfs prompt. + +#. Reboot:: + + reboot + + Wait for the newly installed system to boot normally. Login as root. + +#. Create a user account: + + Replace ``YOUR_USERNAME`` with your desired username:: + + username=YOUR_USERNAME + + zfs create rpool/home/$username + adduser $username + + cp -a /etc/skel/. /home/$username + chown -R $username:$username /home/$username + usermod -a -G audio,cdrom,dip,floppy,netdev,plugdev,sudo,video $username + +#. Mirror GRUB + + If you installed to multiple disks, install GRUB on the additional + disks. + + - For legacy (BIOS) booting:: + + dpkg-reconfigure grub-pc + + Hit enter until you get to the device selection screen. + Select (using the space bar) all of the disks (not partitions) in your pool. + + - For UEFI booting:: + + umount /boot/efi + + For the second and subsequent disks (increment debian-2 to -3, etc.):: + + dd if=/dev/disk/by-id/scsi-SATA_disk1-part2 \ + of=/dev/disk/by-id/scsi-SATA_disk2-part2 + efibootmgr -c -g -d /dev/disk/by-id/scsi-SATA_disk2 \ + -p 2 -L "debian-2" -l '\EFI\debian\grubx64.efi' + + mount /boot/efi + +Step 7: Optional: Configure Swap +--------------------------------- + +**Caution**: On systems with extremely high memory pressure, using a +zvol for swap can result in lockup, regardless of how much swap is still +available. There is `a bug report upstream +`__. + +#. Create a volume dataset (zvol) for use as a swap device:: + + zfs create -V 4G -b $(getconf PAGESIZE) -o compression=zle \ + -o logbias=throughput -o sync=always \ + -o primarycache=metadata -o secondarycache=none \ + -o com.sun:auto-snapshot=false rpool/swap + + You can adjust the size (the ``4G`` part) to your needs. + + The compression algorithm is set to ``zle`` because it is the cheapest + available algorithm. As this guide recommends ``ashift=12`` (4 kiB + blocks on disk), the common case of a 4 kiB page size means that no + compression algorithm can reduce I/O. The exception is all-zero pages, + which are dropped by ZFS; but some form of compression has to be enabled + to get this behavior. + +#. Configure the swap device: + + **Caution**: Always use long ``/dev/zvol`` aliases in configuration + files. Never use a short ``/dev/zdX`` device name. + + :: + + mkswap -f /dev/zvol/rpool/swap + echo /dev/zvol/rpool/swap none swap discard 0 0 >> /etc/fstab + echo RESUME=none > /etc/initramfs-tools/conf.d/resume + + The ``RESUME=none`` is necessary to disable resuming from hibernation. + This does not work, as the zvol is not present (because the pool has not + yet been imported) at the time the resume script runs. If it is not + disabled, the boot process hangs for 30 seconds waiting for the swap + zvol to appear. + +#. Enable the swap device:: + + swapon -av + +Step 8: Full Software Installation +---------------------------------- + +#. Upgrade the minimal system:: + + apt dist-upgrade --yes + +#. Install a regular set of software:: + + tasksel --new-install + + **Note:** This will check "Debian desktop environment" and "print server" + by default. If you want a server installation, unselect those. + +#. Optional: Disable log compression: + + As ``/var/log`` is already compressed by ZFS, logrotate’s compression is + going to burn CPU and disk I/O for (in most cases) very little gain. Also, + if you are making snapshots of ``/var/log``, logrotate’s compression will + actually waste space, as the uncompressed data will live on in the + snapshot. You can edit the files in ``/etc/logrotate.d`` by hand to comment + out ``compress``, or use this loop (copy-and-paste highly recommended):: + + for file in /etc/logrotate.d/* ; do + if grep -Eq "(^|[^#y])compress" "$file" ; then + sed -i -r "s/(^|[^#y])(compress)/\1#\2/" "$file" + fi + done + +#. Reboot:: + + reboot + +Step 9: Final Cleanup +--------------------- + +#. Wait for the system to boot normally. Login using the account you + created. Ensure the system (including networking) works normally. + +#. Optional: Delete the snapshots of the initial installation:: + + sudo zfs destroy bpool/BOOT/debian@install + sudo zfs destroy rpool/ROOT/debian@install + +#. Optional: Disable the root password:: + + sudo usermod -p '*' root + +#. Optional (but highly recommended): Disable root SSH logins: + + If you installed SSH earlier, revert the temporary change:: + + sudo vi /etc/ssh/sshd_config + # Remove: PermitRootLogin yes + + sudo systemctl restart ssh + +#. Optional: Re-enable the graphical boot process: + + If you prefer the graphical boot process, you can re-enable it now. If + you are using LUKS, it makes the prompt look nicer. + + :: + + sudo vi /etc/default/grub + # Add quiet to GRUB_CMDLINE_LINUX_DEFAULT + # Comment out GRUB_TERMINAL=console + # Save and quit. + + sudo update-grub + + **Note:** Ignore errors from ``osprober``, if present. + +#. Optional: For LUKS installs only, backup the LUKS header:: + + sudo cryptsetup luksHeaderBackup /dev/disk/by-id/scsi-SATA_disk1-part4 \ + --header-backup-file luks1-header.dat + + Store that backup somewhere safe (e.g. cloud storage). It is protected by + your LUKS passphrase, but you may wish to use additional encryption. + + **Hint:** If you created a mirror or raidz topology, repeat this for each + LUKS volume (``luks2``, etc.). + +Troubleshooting +--------------- + +Rescuing using a Live CD +~~~~~~~~~~~~~~~~~~~~~~~~ + +Go through `Step 1: Prepare The Install Environment +<#step-1-prepare-the-install-environment>`__. + +For LUKS, first unlock the disk(s):: + + apt install --yes cryptsetup + + cryptsetup luksOpen /dev/disk/by-id/scsi-SATA_disk1-part4 luks1 + # Repeat for additional disks, if this is a mirror or raidz topology. + +Mount everything correctly:: + + zpool export -a + zpool import -N -R /mnt rpool + zpool import -N -R /mnt bpool + zfs load-key -a + zfs mount rpool/ROOT/debian + zfs mount -a + +If needed, you can chroot into your installed environment:: + + mount --make-private --rbind /dev /mnt/dev + mount --make-private --rbind /proc /mnt/proc + mount --make-private --rbind /sys /mnt/sys + mount -t tmpfs tmpfs /mnt/run + mkdir /mnt/run/lock + chroot /mnt /bin/bash --login + mount /boot + mount -a + +Do whatever you need to do to fix your system. + +When done, cleanup:: + + exit + mount | grep -v zfs | tac | awk '/\/mnt/ {print $3}' | \ + xargs -i{} umount -lf {} + zpool export -a + reboot + +Areca +~~~~~ + +Systems that require the ``arcsas`` blob driver should add it to the +``/etc/initramfs-tools/modules`` file and run ``update-initramfs -c -k all``. + +Upgrade or downgrade the Areca driver if something like +``RIP: 0010:[] [] native_read_tsc+0x6/0x20`` +appears anywhere in kernel log. ZoL is unstable on systems that emit this +error message. + +MPT2SAS +~~~~~~~ + +Most problem reports for this tutorial involve ``mpt2sas`` hardware that does +slow asynchronous drive initialization, like some IBM M1015 or OEM-branded +cards that have been flashed to the reference LSI firmware. + +The basic problem is that disks on these controllers are not visible to the +Linux kernel until after the regular system is started, and ZoL does not +hotplug pool members. See `https://github.com/zfsonlinux/zfs/issues/330 +`__. + +Most LSI cards are perfectly compatible with ZoL. If your card has this +glitch, try setting ``ZFS_INITRD_PRE_MOUNTROOT_SLEEP=X`` in +``/etc/default/zfs``. The system will wait ``X`` seconds for all drives to +appear before importing the pool. + +QEMU/KVM/XEN +~~~~~~~~~~~~ + +Set a unique serial number on each virtual disk using libvirt or qemu +(e.g. ``-drive if=none,id=disk1,file=disk1.qcow2,serial=1234567890``). + +To be able to use UEFI in guests (instead of only BIOS booting), run +this on the host:: + + sudo apt install ovmf + sudo vi /etc/libvirt/qemu.conf + +Uncomment these lines: + +.. code-block:: text + + nvram = [ + "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd", + "/usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/OVMF/OVMF_VARS.fd", + "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd", + "/usr/share/AAVMF/AAVMF32_CODE.fd:/usr/share/AAVMF/AAVMF32_VARS.fd" + ] + +:: + + sudo systemctl restart libvirtd.service + +VMware +~~~~~~ + +- Set ``disk.EnableUUID = "TRUE"`` in the vmx file or vsphere configuration. + Doing this ensures that ``/dev/disk`` aliases are created in the guest. diff --git a/docs/Getting Started/Debian/Debian Bullseye Root on ZFS.rst b/docs/Getting Started/Debian/Debian Bullseye Root on ZFS.rst index 4091116be..973c1af36 100644 --- a/docs/Getting Started/Debian/Debian Bullseye Root on ZFS.rst +++ b/docs/Getting Started/Debian/Debian Bullseye Root on ZFS.rst @@ -9,6 +9,14 @@ Debian Bullseye Root on ZFS Overview -------- +Newer release available +~~~~~~~~~~~~~~~~~~~~~~~ + +- See :doc:`Debian Bookworm Root on ZFS <./Debian Bookworm Root on ZFS>` for + new installs. This guide is no longer receiving most updates. It continues + to exist for reference for existing installs that followed it. + + Caution ~~~~~~~