UBSAN: Undefined behaviour cgroup_mkdir #164
Comments
shenki
pushed a commit
that referenced
this issue
Aug 31, 2020
[ Upstream commit bad8e64 ] On commit 6ac9311 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac9311 ("blktrace: use existing disk debugfs directory") Reported-by: [email protected] Signed-off-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Bart Van Assche <[email protected]> Cc: Omar Sandoval <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Nicolai Stange <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: yu kuai <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this issue
Sep 3, 2020
[ Upstream commit bad8e64 ] On commit 6ac9311 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac9311 ("blktrace: use existing disk debugfs directory") Reported-by: [email protected] Signed-off-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Bart Van Assche <[email protected]> Cc: Omar Sandoval <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Nicolai Stange <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: yu kuai <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jmbills
pushed a commit
to Intel-BMC/linux
that referenced
this issue
Dec 7, 2020
On commit 6ac9311 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [openbmc#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ openbmc#164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [openbmc#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ openbmc#164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac9311 ("blktrace: use existing disk debugfs directory") Reported-by: [email protected] Signed-off-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Bart Van Assche <[email protected]> Cc: Omar Sandoval <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Nicolai Stange <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: yu kuai <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Jae Hyun Yoo <[email protected]>
jmbills
pushed a commit
to Intel-BMC/linux
that referenced
this issue
Dec 7, 2020
On commit 6ac9311 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [openbmc#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ openbmc#164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [openbmc#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ openbmc#164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac9311 ("blktrace: use existing disk debugfs directory") Reported-by: [email protected] Signed-off-by: Luis Chamberlain <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Bart Van Assche <[email protected]> Cc: Omar Sandoval <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Nicolai Stange <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: yu kuai <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Jae Hyun Yoo <[email protected]>
shenki
pushed a commit
that referenced
this issue
Jul 16, 2021
commit ab4a0b8 upstream. In ems_usb_disconnect() dev pointer, which is netdev private data, is used after free_candev() call: | if (dev) { | unregister_netdev(dev->netdev); | free_candev(dev->netdev); | | unlink_all_urbs(dev); | | usb_free_urb(dev->intr_urb); | | kfree(dev->intr_in_buffer); | kfree(dev->tx_msg_buffer); | } Fix it by simply moving free_candev() at the end of the block. Fail log: | BUG: KASAN: use-after-free in ems_usb_disconnect | Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895 | | CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4 | Workqueue: usb_hub_wq hub_event | Call Trace: | dump_stack (lib/dump_stack.c:122) | print_address_description.constprop.0.cold (mm/kasan/report.c:234) | kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436) | ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058) Fixes: 702171a ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/[email protected] Cc: linux-stable <[email protected]> Signed-off-by: Pavel Skripkin <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this issue
Jan 31, 2022
[ Upstream commit 5e22dd1 ] The tc_redirect umounts /sys in the new namespace, which can be mounted as shared and cause global umount. The lazy umount also takes down mounted trees under /sys like debugfs, which won't be available after sysfs mounts again and could cause fails in other tests. # cat /proc/self/mountinfo | grep debugfs 34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw # cat /proc/self/mountinfo | grep sysfs 23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw # mount | grep debugfs debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime) # ./test_progs -t tc_redirect #164 tc_redirect:OK Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED # mount | grep debugfs # cat /proc/self/mountinfo | grep debugfs # cat /proc/self/mountinfo | grep sysfs 25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw Making the sysfs private under the new namespace so the umount won't trigger the global sysfs umount. Reported-by: Hangbin Liu <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Cc: Jussi Maki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4.18.8-00344-gbb5e0c8 with UBSAN enabled on ast2400
The text was updated successfully, but these errors were encountered: