The TAsK software implements several algorithms for solving the deterministic static traffic assignment problem with fixed demands, and the non-additive traffic assignment problem.
All code is implemented in the C++ programming language. This is open-source software distributed under the MIT license.
The software was tested only on the Ubuntu (12.10, 13.10 and 14.04) operating system.
Authors
- Olga Perederieieva
- Boshen Chen (A* star shortest path algorithm)
- Benoit Mulocher (bi-directional bi-objective label-setting algorithm)
Contributors
The style sheet for documentation comes from https://github.com/Velron/doxygen-bootstrapped.
Version 1.0
Copyright MIT license
In a paper, please, cite the following reference:
Olga Perederieieva, Matthias Ehrgott, Andrea Raith, Judith Y.T. Wang, A framework for and empirical study of algorithms for traffic assignment, Computers & Operations Research, Volume 54, February 2015, Pages 90-107, ISSN 0305-0548, http://dx.doi.org/10.1016/j.cor.2014.08.024.
In code documentation, include a reference to this website.
- 11 algorithms for additive traffic assignment that belong to link-, path- and bush-based methods.
- 2 algorithms for non-additive traffic assignment (path equilibration and gradient projection).
- 2 equilibration strategies.
- 3 algorithms for finding a step size (bisection, Armijo-like rule and quadratic approximation).
- Various options for direction of descent.
- 3 flow update strategies for path-based algorithms.
- Non-additive shortest path algorithm based on bi-objective label-setting with speed-up techniques that exploit the traffic assignment structure.
- Plain text and KML output of computation results.
Requirements:
- C++ compiler (the software was tested with gcc 4.8.2).
- Boost library that can be downloaded from http://www.boost.org/.
- To install Boost on linux, start the terminal and type: $ sudo apt-get install libboost-dev
Instructions:
- Download archive with source code.
- Unzip.
- Open terminal, go to the folder with source code and type: make.
By default extended floating point precision is used (long double type). In order to use double type, comment line CPPFLAGS += -DUSE_EXTENDED_PRECISION in Makefile and recompile code if necessary by typing in terminal: make clean; make.
Note: If double type is used instead of long double, algorithms might fail to find highly precise solutions.
API documentation can be found in vendor/Docs/index.html.
In order to run the TAsK software one should create a text file with various run parameters first.
The archive with source code includes the SiouxFalls data instance from https://github.com/bstabler/TransportationNetworks. This instance can be used for research purposes only.
After compiling the source code, one can run it with one of the two included parameter files.
Example parameter files are
input.params for conventional traffic assignment
and inputNonAdd.params
for non-additive traffic assignment. Please, use these files as templates for creating
other files with parameters.
Note: If some of the fields are missing or invalid values are used, the program will terminate with an error message or failed assertion.
Warning: All field names and possible values are case-sensitive.
In order to run code with input.params:
- Open terminal and go to the folder with source code.
- Type in terminal: ./ta input.params.
File input.params allows to solve the additive traffic assignment problem with the Algorithm B based on quadratic approximation for the SiouxFalls instance.
File inputNonAdd.params allows to solve the non-additive traffic assignment problem with the path equilibration algorithm based on Newton step for the SiouxFalls instance.
A parameter file must contain the following fields (supported comments \b/\b* for multiple line comments, \b/\b/ for one line comments):
<NETWORK>: {Data/SiouxFalls_tolls.txt}
Path to file with network data
<OD_MATRIX>: {Data/SiouxFalls_trips.txt}
Path to file with O-D matrix.
<WRITE_RND_TOLLS_TO_FILE>: {}
This field is used for the non-additive traffic assignment model. If this field is not empty, then instead of tolls specified in file with network, random ones will be used. This field is ignored if additive traffic assignment problem is solved.
<RND_TOLLS_PROBABILITY>: {}
Probability to assign tolls to links. This field is ignored if option <WRITE_RND_TOLLS_TO_FILE> has empty value.
<RND_TOLLS_MAX_TOLL>: {}
Maximum value of toll for randomly generated tolls. This field is ignored if option <WRITE_RND_TOLLS_TO_FILE> has empty value.
<INDIFF_CURVE_TYPE>: {PiecewiseLinear}
Type of scalarization function. This field is used for the non-additive traffic assignment model. This field is ignored if option <INDIFF_CURVE> has empty value.
Possible values:
- PiecewiseLinear.
- Linear.
- Convex.
- Concave.
<INDIFF_CURVE>: {Curves/SiouxFalls_tolls.curves}
Path to file with scalarization functions. This field is used for the non-additive traffic assignment model. If this field is empty, then the problem is considered to be additive. If this field is set to RND_GEN, then piecewise-linear scalarization functions will be generated randomly.
<MAX_NB_POINTS_PER_CURVE>: {3}
Maximum number of breakpoints per piecewise-linear function. This field is ignored if option <INDIFF_CURVE> has any value except {RND_GEN}.
<NODES>: {}
Path to file with node coordinates. Specify this field if LaTeX output is necessary.
<TIME_LIMIT> : {20000}
Time limit of algorithm execution in seconds.
<ShPathAlgo> : {LC}
Shortest path algorithm. Possible values: - LC - single-source label-setting algorithm. If this option is chosen along with a path-based algorithm, then single-source label-setting will be used for point-to-point shortest path calculations which is much slower than A*. Works only for additive traffic assignment. If one tries to choose this option for non-additive traffic assignment, then the program will terminate with failed assertion.
-
Astar - A* point-to-point algorithm. If this option is specified, A* will be used for path-based algorithms, and one-source Dijkstra's algorithm for convergence measure. If this option is specified along with a link- or bush-based algorithm, then for all one-source shortest path calculations Dijkstra's algorithm will be used. Works only for additive traffic assignment. If one tries to choose this option for non-additive traffic assignment, then the program will terminate with failed assertion.
Warning: Astar option does not work with TAPAS. Never use them together.
-
NonAdd - non-additive shortest path. Works only for non-additive traffic assignment. If one tries to choose this option for additive traffic assignment, then the program will terminate with failed assertion.
-
LazyNonAdd - lazy non-additive shortest path. Works only for non-additive traffic assignment. If one tries to choose this option for additive traffic assignment, then the program will terminate with failed assertion.
-
LazySP - lazy additive shortest path. Works only for additive traffic assignment. If one tries to choose this option for non-additive traffic assignment, then the program will terminate with failed assertion. .
<UseP2PShPathWithRandomReturn>: {}
If any non-empty value is specified, then the randomised flow update strategy is used where probability of calculating a point-to-point shortest path depends on the iteration number. This option works only with path-based algorithms and is ignored if an algorithm from a different group is used.
<FIXED_PROBABILITY>: {}
Probability of calculating a point-to-point shortest path. Possible values: any real number in the interval (0, 1]. This option is ignored if field has empty value.
<CONV_MEASURE>: {MAX_DIFF}
Convergence measure. Possible values:
- RGAP - relative gap. This option works for additive traffic assignment only.
- MAX_DIFF - max-min cost difference bound. This option works for path-based algorithms only (for both additive and non-additive problems).
<PRECISION>: {1e-5}
Algorithm precision. For example, if : {1e-5}, then the algorithm will terminate when convergence measure reaches any value strictly smaller than 1e-5. Possible values: any positive number.
<ZERO_FLOW>: {1e-10}
Link flow tolerance. For example, if <ZERO_FLOW>: {1e-10}, then link flow will be reset to zero if its value is less than or equal to 1e-10. Possible values: any positive number.
<DIR_TOLERANCE>: {1e-10}
Tolerance of descent direction of path- and bush-based algorithms. For example, if <DIR_TOLERANCE>: {1e-10}, then a component of the direction of descent is set to zero if its value is less than 1e-10. Possible values: any positive number.
<ALGORITHM>: {PE}
Algorithm. Possible values:
- FW - Frank-Wolfe.
- CFW - conjugate Frank-Wolfe.
- BFW - bi-conjugate Frank-Wolfe.
- PE - path equilibration.
- GP - gradient projection.
- PG - projected gradient.
- ISP - improved social pressure.
- B - Algorithm B based on Newton step.
- Bstep - Algorithm B based on a line search.
- LUCE - linear user cost equilibrium.
- TAPAS - traffic assignment by paired alternative segments based on Newton step.
- TAPASstep - traffic assignment by paired alternative segments based on a line search. .
Warning: In the case of non-additive traffic assignment only PE and GP options are available with the set to {APP3}.
<LINE_SEARCH>: {BISEC}.
Line search. This field is used only for algorithms based on line search. If a different algorithm is specified, this field is ignored. Possible values:
- BISEC - bisection.
- ARMIJO - Armijo-like rule.
- QUAD_APP - quadratic approximation.
<LS_PRECISION>: {1e-15}
Line search tolerance. This field is used only if one of the line searcher is used.
<ARMIJO_DEC>: {2}
Decrement in Armijo-like rule. This option is applicable only if <LINE_SEARCH>: {ARMIJO}.
<EQUILIBRATION>: {EQI}
Type of equilibration. Possible values:
- EQI - Equilibration I.
- EQII - Equilibration II.
<MAX_ITER>: {10}
Maximum number of iterations for Equilibration II.
<APPROACH>: {APP3}
Type of the direction of descent for path-based algorithms. Possible values depend on the algorithm.
-
For PE:
- APP1 - path equilibration based on a line search.
- APP3 - path equilibration based on Newton step.
-
For GP:
- APP1 - gradient projection based on a line search.
- APP2 - gradient projection based on a line search with scaled direction of descent.
- APP3 - gradient projection without a line search.
-
For PG:
- APP1 - projected gradient based on a line search.
-
For ISP:
- APP1 - improved social pressure based on a line search. . .
<ALPHA>: {0.25}
Constant that is used in gradient projection without a line search. Valid values: any positive real number. This value must be set to a positive number even if gradient projection is not used.
<SLOPE>: {1e-15}
Minimum slope of the derivative of link cost function used in improved social pressure. This value must be set to a positive number even if improved social pressure is not used.
<ISP_SCALE>: {0.15}
The parameter of the improved social pressure algorithm that is used to divide all paths into two sets. This value must be set to a positive number even if improved social pressure is not used.
<NEWTON_STEPS>: {SINGLE}
Type of Newton step for Algorithm B and TAPAS. Possible values:
- SINGLE - performs one Newton step.
- MULTI - performs several Newton steps.
<MU>: {0.5}
Constant used in TAPAS for determining cost-effective PAS.
<V>: {0.25}
Constant used in TAPAS for determining flow-effective PAS.
<BIOBJ_SHPATH_P2P>: {BiLabelSetting}
Bi-objective point-to-point shortest path algorithm. This field is used on for non-additive traffic assignment. Possible values:
- BiLabelSetting - bi-objective label-setting.
- BiLabelSetting_bidirectional - bi-directional bi-objective label-setting.
<BLS_BOUNDS> : {zeroFlow}
Travel time lower bound. This field is used only for non-additive traffic assignment. If empty, then no bounds are used, otherwise possible values:
- zeroFlow - travel time bounds based on zero flows.
- currentFlow - travel time bounds based on current flows.
<USE_EXISTING_PATHS> : {onePath}
Addition of known paths technique. This field is used only for non-additive traffic assignment. If empty no paths are added, otherwise possible values are:
- onePath - only shortest path is added.
- currentPaths - all existing paths are added.
<USE_PATH_COST_DOMINATION> : {yes}
Path cost domination rule. This field is used only for non-additive traffic assignment.
If empty usual domination rule is used, otherwise domination by path cost is used.
<SHOW_CONVERGENCE>: {yes}
If the value of this field is not empty, prints convergence on the screen.
<LINK_FLOWS>: {}
Path to file where link flows must be written. If the field is empty, no file will be created. If the field is set to AUTO, an automatically generated name will be used.
<CONVERGENCE>: {}
Path to file where convergence must be written. If the field is empty, no file will be created. If the field is set to AUTO, an automatically generated name will be used.
<PATH_SET>: {}
Path to file where path sets must be written. Applicable only to path-based algorithms. If the field is empty, no file will be created. If the field is set to AUTO, an automatically generated name will be used.
<LATEX_OUTPUT>: {net.tex}
Path to file where latex output must be written. If this field is specified, then field must be specified too. If the field is empty, no file will be created. If the field is set to AUTO, an automatically generated name will be used.
Note: For KML output one has to modify main.cpp and use classes KMLNetOutput, KMLSelectLink, KMLPlotTolls and DiffKMLNetOutput.
- Excessive usage of pointers where references are more appropriate.
- In a few places arrays are used where vectors would be better.
- ObjectManager is responsible for creation of ALL objects.
- StarNetwork and PathBasedFlowMove iterator-like methods are not safe to use in nested loops.