Getting DEPRECATION: python-prctl when installed DEPRECATION: python-prctl and ImportError: libopenblas.so.0: when ran ImportError: libopenblas.so.0:

[razibulislam]

Hello Sir I am getting some error: Logs are below:
System information: Raspberry Pi 4B 4 gb ram Bookworm 32 bit:

Please let me know if I am doing something wrong.

sumon@mmirror:~ $ python3 -m venv /python-facereco
sumon@mmirror: $ source /python-facereco/bin/activate
(python-facereco) sumon@mmirror: $ pip install face-recognition numpy dlib picamera2 opencv-python
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting face-recognition
Downloading https://www.piwheels.org/simple/face-recognition/face_recognition-1.3.0-py2.py3-none-any.whl (15 kB)
Collecting numpy
Downloading https://www.piwheels.org/simple/numpy/numpy-1.26.4-cp311-cp311-linux_armv7l.whl (5.6 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.6/5.6 MB 3.4 MB/s eta 0:00:00
Collecting dlib
Downloading https://www.piwheels.org/simple/dlib/dlib-19.24.4-cp311-cp311-linux_armv7l.whl (3.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 6.1 MB/s eta 0:00:00
Collecting picamera2
Downloading https://www.piwheels.org/simple/picamera2/picamera2-0.3.18-py3-none-any.whl (76 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 77.0/77.0 kB 25.1 kB/s eta 0:00:00
Collecting opencv-python
Downloading opencv-python-4.9.0.80.tar.gz (92.9 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 92.9/92.9 MB 1.0 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting face-recognition-models>=0.3.0
Downloading https://www.piwheels.org/simple/face-recognition-models/face_recognition_models-0.3.0-py2.py3-none-any.whl (100.6 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.6/100.6 MB 528.5 kB/s eta 0:00:00
Collecting Click>=6.0
Downloading https://www.piwheels.org/simple/click/click-8.1.7-py3-none-any.whl (97 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 97.9/97.9 kB 331.1 kB/s eta 0:00:00
Collecting Pillow
Downloading https://www.piwheels.org/simple/pillow/pillow-10.3.0-cp311-cp311-linux_armv7l.whl (1.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 1.4 MB/s eta 0:00:00
Collecting PiDNG
Downloading https://www.piwheels.org/simple/pidng/pidng-4.0.9-cp311-cp311-linux_armv7l.whl (52 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 52.3/52.3 kB 1.5 MB/s eta 0:00:00
Collecting piexif
Downloading https://www.piwheels.org/simple/piexif/piexif-1.1.3-py2.py3-none-any.whl (20 kB)
Collecting simplejpeg
Downloading https://www.piwheels.org/simple/simplejpeg/simplejpeg-1.7.2-cp311-cp311-linux_armv7l.whl (323 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 323.2/323.2 kB 2.1 MB/s eta 0:00:00
Collecting v4l2-python3
Downloading https://www.piwheels.org/simple/v4l2-python3/v4l2_python3-0.3.4-py3-none-any.whl (22 kB)
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))': /simple/python-prctl/
Collecting python-prctl
Downloading python-prctl-1.8.1.tar.gz (28 kB)
Preparing metadata (setup.py) ... done
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'ProtocolError('Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))': /simple/av/
Collecting av
Downloading https://www.piwheels.org/simple/av/av-12.0.0-cp311-cp311-linux_armv7l.whl (9.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.2/9.2 MB 1.6 MB/s eta 0:00:00
Building wheels for collected packages: opencv-python
Building wheel for opencv-python (pyproject.toml) ... done
Created wheel for opencv-python: filename=opencv_python-4.9.0.80-cp311-cp311-linux_armv7l.whl size=13264182 sha256=817a6e873e67398604ac68b86a77134892d5eb9654dd5c6736dc8274c4363a82
Stored in directory: /home/sumon/.cache/pip/wheels/66/42/68/6dcd57c4b931ac919ae69acfac8517255644f88c8c3ba4e14b
Successfully built opencv-python
Installing collected packages: v4l2-python3, python-prctl, face-recognition-models, dlib, Pillow, piexif, numpy, Click, av, simplejpeg, PiDNG, opencv-python, face-recognition, picamera2
DEPRECATION: python-prctl is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at pypa/pip#8559
Running setup.py install for python-prctl ... done
Successfully installed Click-8.1.7 PiDNG-4.0.9 Pillow-10.3.0 av-12.0.0 dlib-19.24.4 face-recognition-1.3.0 face-recognition-models-0.3.0 numpy-1.26.4 opencv-python-4.9.0.80 picamera2-0.3.18 piexif-1.1.3 python-prctl-1.8.1 simplejpeg-1.7.2 v4l2-python3-0.3.4
(python-facereco) sumon@mmirror:~ $ nano /python-facereco/pyvenv.cfg
(python-facereco) sumon@mmirror: $ cd /MagicMirror/modules/
(python-facereco) sumon@mmirror:/MagicMirror/modules $ git clone https://github.com/nischi/MMM-Face-Reco-DNN.git
Cloning into 'MMM-Face-Reco-DNN'...
remote: Enumerating objects: 680, done.
remote: Counting objects: 100% (323/323), done.
remote: Compressing objects: 100% (94/94), done.
remote: Total 680 (delta 250), reused 290 (delta 228), pack-reused 357
Receiving objects: 100% (680/680), 1.18 MiB | 3.79 MiB/s, done.
Resolving deltas: 100% (421/421), done.
(python-facereco) sumon@mmirror:/MagicMirror/modules $ cd MMM-Face-Reco-DNN
(python-facereco) sumon@mmirror:/MagicMirror/modules/MMM-Face-Reco-DNN $ npm install

added 228 packages, and audited 229 packages in 9s

105 packages are looking for funding
run npm fund for details

found 0 vulnerabilities
(python-facereco) sumon@mmirror:/MagicMirror/modules/MMM-Face-Reco-DNN $ cd tools
(python-facereco) sumon@mmirror:/MagicMirror/modules/MMM-Face-Reco-DNN/tools $ npm run encode

[email protected] encode
python tools/encode.py -i dataset -e model/encodings.pickle

Traceback (most recent call last):
File "/home/sumon/MagicMirror/modules/MMM-Face-Reco-DNN/tools/encode.py", line 2, in
import face_recognition
File "/home/sumon/python-facereco/lib/python3.11/site-packages/face_recognition/init.py", line 7, in
from .api import load_image_file, face_locations, batch_face_locations, face_landmarks, face_encodings, compare_faces, face_distance
File "/home/sumon/python-facereco/lib/python3.11/site-packages/face_recognition/api.py", line 4, in
import dlib
File "/home/sumon/python-facereco/lib/python3.11/site-packages/dlib/init.py", line 19, in
from _dlib_pybind11 import *
ImportError: libopenblas.so.0: cannot open shared object file: No such file or d(py((p(python-(python-facerec((p(python-facerec(pyth((py(py(((python-facereco) sumon@mmirror:~/MagicMirror/modules/MMM-Face-Reco-DNN/tools $ ^C

Also tried to run the encode deactivating the virtual environment:
sumon@mmirror:~/MagicMirror/modules/MMM-Face-Reco-DNN/tools $ npm run encode

[email protected] encode
python tools/encode.py -i dataset -e model/encodings.pickle

Traceback (most recent call last):
File "/home/sumon/MagicMirror/modules/MMM-Face-Reco-DNN/tools/encode.py", line 2, in
import face_recognition
ModuleNotFoundError: No module named 'face_recognition'

Kind regards,

Razibul

[nischi]

Hi @razibulislam
This sounds more like an error withing face_recognition module which was installed with pip.
Properbly justadudewhohacks/face-recognition.js#43

Which version of node do you use?

[razibulislam]

Hi @razibulislam This sounds more like an error withing face_recognition module which was installed with pip. Properbly justadudewhohacks/face-recognition.js#43

Which version of node do you use?
sumon@mmirror:~ $ node -v
v22.1.0

[nischi]

I use the LTS version. can you try version 20? Not sure if this helps.

[razibulislam]

I use the LTS version. can you try version 20? Not sure if this helps.

I have tried with LTS v 20. Here is what I am getting:
error message:

    File "setup.py", line 267, in main
      setup(
    File "/tmp/pip-build-env-d4atuz_c/overlay/lib/python3.11/site-packages/skbuild/setuptools_wrap.py", line 706, in setup
      _classify_installed_files(
    File "setup.py", line 411, in _classify_installed_files_override
      with open(config_py, 'w') as opencv_init_config:
           ^^^^^^^^^^^^^^^^^^^^

### **FileNotFoundError: [Errno 2] No such file or directory: '_skbuild/linux-aarch64-3.11/cmake-install/python/cv2/config-3.py'

  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for opencv-python
Failed to build opencv-python
ERROR: Could not build wheels for opencv-python, which is required to install pyproject.toml-based projects**

[razibulislam]

I have tried with LTS v 20. Here is what I am getting:
error message:
File "/tmp/pip-build-env-d4atuz_c/overlay/lib/python3.11/site-packages/skbuild/setuptools_wrap.py", line 706, in setup
_classify_installed_files(
File "setup.py", line 411, in _classify_installed_files_override
with open(config_py, 'w') as opencv_init_config:
^^^^^^^^^^^^^^^^^^^^
FileNotFoundError: [Errno 2] No such file or directory: '_skbuild/linux-aarch64-3.11/cmake-install/python/cv2/config-3.py'
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for opencv-python
Failed to build opencv-python
ERROR: Could not build wheels for opencv-python, which is required to install pyproject.toml-based projects