everything-presence-one.yaml

substitutions:
  name: "everything-presence-one"
  friendly_name: "Everything Presence One"
  project_name: "Everything Smart Technology.Everything Presence One"
  project_version: "1.1.7"
  temperature_offset: "-3"
  humidity_offset: "5"
  temperature_update_interval: "60s"
  illuminance_update_interval: "30s"
  hidden_ssid: "false"
  factory_reset_disabled: "true"
  uart_target_output_disabled: "true"
  uart_presence_output_disabled: "true"

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: true
  project:
    name: ${project_name}
    version: ${project_version}

esp32:
  board: esp32dev

logger:

api:

ota:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

captive_portal:

improv_serial:

#esp32_improv:
#  authorizer: none

# Add Bluetooth Proxy Support
esp32_ble_tracker:
  scan_parameters:
    interval: 1100ms
    window: 1100ms
    active: true

bluetooth_proxy:
  active: true

dashboard_import:
  package_import_url: github://everythingsmarthome/everything-presence-one/everything-presence-one.yaml@main
  import_full_config: false

light:
  - platform: status_led
    name: ESP32 status LED
    pin: GPIO32
    entity_category: config
    disabled_by_default: True
  - platform: binary
    name: mmWave LED
    restore_mode: RESTORE_DEFAULT_OFF
    output: mmwave_led_output
    entity_category: config
    disabled_by_default: True

output:
  - platform: template
    id: mmwave_led_output
    type: binary
    write_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - if:
          condition:
            lambda: !lambda return state;
          then:
            - uart.write: "setLedMode 1 0"
          else:
            - uart.write: "setLedMode 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

i2c:
  sda: 26
  scl: 25
  scan: true

sensor:
  - platform: shtcx
    id: "shtc3_sensor"
    temperature:
      name: Temperature
      id: temperature_sensor
      filters:
        - offset: ${temperature_offset}
        - lambda: "return x + id(temperature_offset_ui).state;"
    humidity:
      name: Humidity
      id: humidity_sensor
      filters:
        - offset: ${humidity_offset}
        - lambda: "return x + id(humidity_offset_ui).state;"
    address: 0x70
    update_interval: ${temperature_update_interval}
  - platform: bh1750
    name: Illuminance
    id: illuminance_sensor
    address: 0x23
    update_interval: ${illuminance_update_interval}
    filters:
      - lambda: "return x + id(illuminance_offset_ui).state;"

binary_sensor:
  - platform: gpio
    name: mmWave
    id: mmwave
    device_class: occupancy
    pin:
      number: GPIO15
      mode: INPUT_PULLDOWN
  - platform: gpio
    pin:
      number: 33
      mode: INPUT_PULLDOWN
    name: PIR
    id: pir_motion_sensor
    device_class: motion
    filters:
      - delayed_off:  !lambda 'return id(pir_off_latency).state * 1000.0;'
  - platform: template
    name: Occupancy
    id: occupancy
    device_class: occupancy
    filters:
      - delayed_off: !lambda 'return id(occupancy_off_latency).state * 1000.0;'
    on_state:
      - lambda: 'id(illuminance_sensor).update();'
    lambda: |-
      if ( id(mmwave).state or id(pir_motion_sensor).state) {
        return true;
      } 
      else if (id(mmwave).state == 0 and id(pir_motion_sensor).state == 0) {
        return false;
      } 
      else {
        return id(occupancy).state;
      }
uart:
  id: uart_bus
  tx_pin: GPIO13
  rx_pin: GPIO14
  baud_rate: 115200
  debug:
    direction: BOTH
    dummy_receiver: true
    after:
      delimiter: "\n"
    sequence:
      - lambda: UARTDebug::log_string(direction, bytes);

switch:
  - platform: template
    name: mmWave sensor
    id: mmwave_sensor
    disabled_by_default: True
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_ON
    turn_on_action:
      - uart.write: "sensorStart"
      - delay: 1s
    turn_off_action:
      - uart.write: "sensorStop"
      - delay: 1s

  - platform: template
    name: UART presence output
    id: uart_presence_output
    entity_category: config
    internal: ${uart_presence_output_disabled}
    optimistic: true
    turn_on_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor
    turn_off_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 1 0"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: UART target output
    id: uart_target_output
    entity_category: config
    internal: ${uart_target_output_disabled}
    optimistic: true
    assumed_state: false
    turn_on_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 2 1 1 1"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor
    turn_off_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "setUartOutput 2 0"
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 3s
      - switch.turn_on: mmwave_sensor

number:
  - platform: template
    id: mmwave_distance
    name: mmWave distance
    icon: mdi:arrow-left-right
    entity_category: config
    min_value: 0
    max_value: 800
    initial_value: 315
    optimistic: true
    step: 15
    restore_value: true
    unit_of_measurement: cm
    mode: slider
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda int cm = (int)ceil(x / 15.0);
          std::string cms = "detRangeCfg -1 0 " + to_string(cm);
          return std::vector<unsigned char>(cms.begin(), cms.end());
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: mmWave off latency
    icon: mdi:clock-end
    entity_category: config
    id: mmwave_off_latency
    min_value: 1
    max_value: 600
    initial_value: 15
    optimistic: true
    step: 5
    restore_value: true
    unit_of_measurement: seconds
    mode: slider
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda |-
          std::string mss = "setLatency " + to_string(id(mmwave_on_latency).state) + " " + to_string(id(mmwave_off_latency).state);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: mmWave on latency
    icon: mdi:clock-start
    id: mmwave_on_latency
    entity_category: config
    min_value: 0
    max_value: 2
    initial_value: 0
    optimistic: true
    step: 0.25
    restore_value: true
    unit_of_measurement: seconds
    mode: slider
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: !lambda |-
          std::string mss = "setLatency " + to_string(id(mmwave_on_latency).state) + " " + to_string(id(mmwave_off_latency).state);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveCfg 0x45670123 0xCDEF89AB 0x956128C6 0xDF54AC89"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: mmWave sensitivity
    icon: mdi:target-variant
    id: mmwave_sensitivity
    entity_category: config
    min_value: 0
    max_value: 9
    initial_value: 7
    optimistic: true
    step: 1
    restore_value: true
    set_action:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write:
          !lambda std::string mss = "setSensitivity " + to_string((int)x);
          return std::vector<unsigned char>(mss.begin(), mss.end());
      - delay: 1s
      - uart.write: "saveConfig"
      - delay: 1s
      - switch.turn_on: mmwave_sensor

  - platform: template
    name: Occupancy off latency
    icon: mdi:clock-end
    entity_category: config
    id: occupancy_off_latency
    min_value: 1
    max_value: 600
    initial_value: 15
    optimistic: true
    step: 5
    restore_value: true
    unit_of_measurement: seconds
    mode: slider

  - platform: template
    name: PIR off latency
    icon: mdi:clock-end
    entity_category: config
    id: pir_off_latency
    min_value: 1
    max_value: 120
    initial_value: 10
    optimistic: true
    step: 1
    restore_value: true
    unit_of_measurement: seconds
    mode: slider

  - platform: template
    name: "Temperature Offset"
    id: temperature_offset_ui
    unit_of_measurement: "°C"
    min_value: -20
    max_value: 20
    step: 0.1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:thermometer"
    entity_category: config
    on_value:
      - lambda: 'id(shtc3_sensor).update();'
  - platform: template
    name: "Humidity Offset"
    id: humidity_offset_ui
    unit_of_measurement: "%"
    min_value: -50
    max_value: 50
    step: 0.1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:water-percent"
    entity_category: config
    on_value:
      - lambda: 'id(shtc3_sensor).update();'
  - platform: template
    name: "Illuminance Offset"
    id: illuminance_offset_ui
    unit_of_measurement: "lx"
    min_value: -50
    max_value: 50
    step: 1
    mode: box
    update_interval: never
    optimistic: true
    restore_value: true
    initial_value: 0
    icon: "mdi:brightness-5"
    entity_category: config
    on_value:
      - lambda: 'id(illuminance_sensor).update();'

button:
  - platform: restart
    id: restart_internal
    entity_category: config
    internal: true
  - platform: template
    name: Restart mmWave sensor
    id: restart_mmwave
    entity_category: config
    internal: true
    on_press:
      - uart.write: "resetSystem"
  - platform: template
    name: Restart
    icon: mdi:restart
    entity_category: config
    disabled_by_default: True
    on_press:
      - button.press: restart_mmwave
      - button.press: restart_internal
  - platform: safe_mode
    internal: false
    name: Safe mode
    entity_category: config
    disabled_by_default: True
  - platform: template
    name: Factory reset mmWave
    icon: mdi:cog-counterclockwise
    id: factory_reset_mmwave
    internal: ${factory_reset_disabled}
    entity_category: config
    on_press:
      - switch.turn_off: mmwave_sensor
      - delay: 1s
      - uart.write: "resetCfg"
      - delay: 3s
      - switch.turn_on: mmwave_sensor