Controlling RGBW LED Strip lights from your browser with a Raspberry Pi Zero.
More info at https://www.easyprogramming.net/raspberrypi/rgbw_led_strip.php
Check out the demo on YouTube by clicking on the following gif:
This project contains the tutorial files for EasyProgramming.net.
If you've followed my other tutorials, browser control should be something that is familiar to you. The requirements below should also be very familiar:
In order to complete this project, you will need some of these hardware:
- Raspberry Pi - can use Zero, Zero W, 2, 3, 4
- (Optional) Wireless dongle - If you are using the basic Pi 0 v1.3. This is not necessary for the other versions of the Pi.
- RGBW LED Strip - These normally have 5 connections, One for each color and an additional for Ground.
- Pi Power Supply - need 5V to your Pi
- LED Strip Power Supply - 12V power adapter passing 1-2 Amps of current will be sufficient. This should also work with a 24V LED Strip.
- Logic Level MOSFET Transistor - I use MOSFETS for this project. They can be any logic-level transistor (most of them start with IRL - the L is for 'logic'). It just needs to be able to turn on with 5v or less of power. The models I've tested with are IRLU024 and IRL2203.
- Wiring - You need 5 wires to connect the LEDs and Ground. You can find adapters or you can use individual wires.
- (Optional) Aluminum Extrusion - although not necessary, an aluminum extrusion will help dissipate heat as well as make your installation more sturdy.
- (Optional) Pi Case - Something to house your Pi and Relay. You can make your own or if you want, you can just leave it as is but be careful of shorts and electric shocks!
- (Optional) Soldering Iron - if you are comfortable, it is best to solder the lights and connections in place so they don't disconnect easily.
- Tools - a wire cutter/stripper would be most helpful to you.
The prerequisites for this tutorial is the same as the last because everything in this tutorial is the end product of what we've learned so far about the Raspberry Pi and some things we learned with JavaScript and jQuery. If you get stuck anywhere, take a look at these tutorials:
- Headless Raspberry Pi
- Previously we needed RPi.GPIO library, for this, we need pigpiod - More info at http://abyz.me.uk/rpi/pigpio/pigpiod.html
- Run Apache on your Pi
- Running a Flask App on your Pi
- Run Flask behind Apache
- Simple AJAX with jQuery/JavaScript
For this project, you need 4 MOSFETs, one for each color. The MOSFETs then need to be connected to the following GPIO Pins:
| Color | GPIO Pin |
|---|---|
| Red | 24 |
| Green | 25 |
| Blue | 20 |
| White | 18 |
| Yellow | Power |
| Black | GND |
Note: I'm using n N-Channel MOSFET so mine are all common ground, if you use a P-Channel MOSFET, switch to common power. If you're not sure what you have, consult the datasheet for your transistor.
In my schematic, I'm using a Yellow wire to represent the 12v power coming from our adapter and it connects to the RGBW's power.
The mosfets used must be logic level so they can be turned on with the 5 volts of electricity that the Pi can provide. They should also be able to handle whatever voltage and current you pass through to the lights. The lights I use are 12v 5050 SMD LEDs. This project should also work with 24v LEDs.
The ground connects to the Raspberry Pi and a ground line goes from our Pi to each of the "Source" pins of the MOSFETs. As stated in the above note, my LED Strip shares common ground because I'm using an N-channel MOSFET. If you have a P-Channel mosfet, make sure they share common VCC. In my case, I connected them all to the different ground pins on the Pi or split one out into all 4.
The "Drain" pins on our MOSFETS are then connected to each of the colors on the RGBW LED. When the power is turned on for a mosfet, the drain and source pins get connected and power is providedto that color and that's controlled by the "Gate" pin on the MOSFET. This pin is connected to each of the above defined GPIO pins on our Pi. When we send an 'on' signal from the Pi to the Gate Pin, the Drain and Source gets connected. And the faster you do it (Pulse With Modulation) the brighter/more vibrant a color is (up to 255 times a second).
If you switch the pins, edit rgbw.py to reflect the new Pins.
Follow the tutorial here to learn how to run a Flask app behind Apache: https://www.easyprogramming.net/raspberrypi/pi_flask_apache.php
As stated in the above tutorial and in the Prerequisites, here's a very quick checklist for this project:
- Apache
- venv (virtual environment)
-
activate-this.pyinside your venv - you can fi nd this in theutils/directory - Mod-WSGI More info below
-
pigpiod
As stated in the last point above, we need to install pigpiod:
wget abyz.me.uk/rpi/pigpio/pigpio.zip
unzip pigpio.zip
cd PIGPIO
make
sudo make installI will also include a version of the zip in this repo as a backup.
After you install pigpiod, run it with:
sudo pigpiodTechnically, you can run this outside of venv and it'll still work, because it's running globally and our virtual environment will have access to the daemon. But we still
need the library in our venv, so while activated inside your virtual environment, install pigpio with:
pip install pigpioNow when we run our pigpio commands, we won't get an error.
The script.js has jQuery that calls the Flask app using simple AJAX calls. They assume that the path for the flask app is /api/lr -
if you use another path, change this in the JavaScript to avoid getting 404s on your AJAX calls. You can also modify the API endpoints in rgbw.py.
This config object in script.js allows you to configure the URL for your Pi. The default is an ip address but if you can access your Pi via a hostname or domain name,
just change the url properly to reflect the address:
let config = {
url: 'http://{{ip_addr}'
};I use a basic cache busting system in the JavaScript by looking at the current time for the request and appending it to the AJAX request looking for status.txt because
I've noticed that browsers love to store this in memory, especially mobile browsers. This ensures that we don't have to worry about caching.
I'm using a bunch of libraries to help with various things such as AJAX calls, the brightness slider, color picker, etc. Here is a list of all external dependencies:
- jQuery v3.3.1 - https://github.com/jquery/jquery
- Pickr 1.4.5 - https://github.com/Simonwep/pickr
- Including its css: classic.min.css
- noUiSlider 14.0.3 - https://github.com/leongersen/noUiSlider
- Including its CSS
- wNumb.js (dependency of noUiSlider) - https://github.com/rudza/meteor-wnumb/blob/master/wNumb.js
- Bootstrap v4.3.1 - https://github.com/twbs/bootstrap
- CSS only
- Fonts
- obitron.css
- sourcecodepro.css
Note: All of these dependencies have been localized and included in the static/* directories. This allows you to use this app without needing to connect to the internet.
A simple LAN connection with an internal IP will do.
The rgbw.wsgi file should be placed in the same directory as rgbw.py which contains your Flask controllers. Make sure the paths for activate_this.py and rgbw.py match
your installation. If you rename the flask controller, you have edit the wsgi file to reflect the changes.
Take the utils/apache-led.conf configuration file and place it in the appropriate Apache/sites-available directory and enable it with with:
sudo a2ensite apache-led.confFeel free to use your own configuration and name it anything you want! This should be used as a template.
Once that's done, restart Apache with:
sudo service apache2 restartIf you get a WSGI error, your Pi may not have Mod-WSGI installed. Run the following and restart apache:
sudo apt install libapache2-mod-wsgi-py3 -yNote the apache configuration enables CORS from all origins. If you don't want to enable CORS and want to handle these requests another way,
remove this line in apache-led.conf:
Header set Access-Control-Allow-Origin "*"
IF you have this enable, you must enable mod_headers on your Pi with the following command for this to work:
sudo a2enmod headersAs long as you don't open your Pi to the outside world, you should be fine. You can also specify which origins are allowed to make requests.
If everything is set up correctly, the AJAX call will happen with the following url: http://{{ip_addr}}/api/kitchen?status=on
Only a status of on or off are accepted. Anything else will return a simple error message. Open up the JavaScript console for more info.
Once everything is done, your app should look something like this:
This endpoint is defined in the apache configuration. If you don't want this to be the end point, change the following in the config:
WSGIScriptAlias /api/lr I used "lr" for Living Room because that's where these lights are. All endpoints are using simple GET requests, they can be changed in rgbw.py if you prefer POST.
You can pass in 4 different query string parameters of red, green, and bluewith values of 0 to 255. A value of 0 means off (or no power) and 255 means on (or full power). Different combinations will cause different colors and brightnesses. The Frontend should allow you to send these using a color picker.
These parameters are optional. If they are not sent, they will automatically be given a value of 0. For example, the following request:
/api/lr?red=255&blue=150
Will return this:
{
"blue": 150,
"green": 0,
"red": "255",
}Sending no values will turn the lights off.
The white lights were separated for simplicity. Since the frontend color picker only produces Red, Green, and Blue color codes, the white was left out. For simplicity, The white LED is controlled by a separate slider above the RGB one. You can control the brightness from 0% to 100%. 0% is off and 100% is technically a value of 255.
The states of the lights are held in two different JSON files. rgb.json which houses the Red, Green, and blue Color statuses. And white.json which houses the
frequency/brightness of the White LED. You can pass in the query parameter colors and either rgb or white as a value to get the different states as follow:
For RGB:
/api/lr/getStatus?colors=rgb
For White:
/api/lr/getStatus?colors=white
This data is used when the page is refreshed or loaded for the first time, then you know what color your lights are on.
Note: rgbw.py needs to state the full path to the JSON files. It is currently set to /var/www/html/rgbw/*.json - if you need to host this elsewhere, change this.
The user Pi needs to be able to write to these files as well.
I include these files in the repo because if they don't exist, the app throws a 500 Internal Server Error. By default, all values are 0.
When the Pi first boots, pigpiod is not automatically started. To ensure that it starts properly, I'd recommend entering this into your crontab. First edit crontab with this:
crontab -eThen enter this in the file and save:
@reboot sudo pigpiod
If you don't do this, the next time your Pi reboots, pigpiod won't be running and your lights won't work until you turn it on.
If you are getting a permissions issue, the repo may have been copied as root instead of pi. Run the following to change ownership:
sudo chown pi:pi *
If for some reason you can't download activate_this.py, you can find a copy of it in the utils/ directory. Run this to copy it over:
sudo cp utils/activate_this.py venv/bin/
- Nazmus Nasir - Nazm.us - Owner of EasyProgramming.net
This project is licensed under the MIT License - see the LICENSE.md file for details
Have questions? You can reach me through several different channels. You can ask a question in the issues forum, on EasyProgramming.net, or on the video comments on YouTube.
I will accept Pull requests fixing bugs or adding new features after I've vetted them. Feel free to create pull requests!