Skip to content

Latest commit

 

History

History
567 lines (416 loc) · 38.7 KB

scikit-learn.md

File metadata and controls

567 lines (416 loc) · 38.7 KB
Raw

Machine Learning with scikit-learn

Table of Contents

Introduction

Supervised machine learning techniques make use of known samples to train a model, and then use this model to make predictions on new data. One of the best known machine learning libraries is scikit-learn, a package that provides efficient versions of a large number of well researched algorithms. A good introduction to machine learning and the scikit-learn API is available in this excerpt from the Python Data Science Handbook.

This SSE provides functions to train, test and evaluate models and then use these models to make predictions. The implementation includes classification and regression algorithms.

In addition this SSE also implements the unsupervised machine learning algorithms available in scikit-learn. These include techniques for inferring structure in unlablelled data such as clustering and dimensionality reduction.

Using pre-trained models in Qlik

This SSE also provides capability to get predictions from externally trained scikit-learn and Keras models. This capability is explained here.

Supervised Machine Learning

Machine learning problems can be broken down into general steps. In this SSE each step is carried out with the help of functions that provide a bridge between Qlik and the scikit-learn API. These functions are explained in the sections below.

At a high-level the steps are:

  1. Prepare the features in Qlik
  2. Prepare feature definitions in Qlik
  3. Setup the model with relevant parameters
    • PyTools.sklearn_Setup(model_name, estimator_args, scaler_args, execution_args)
    • PyTools.sklearn_Setup_Adv(model_name, estimator_args, scaler_args, metric_args, dim_reduction_args, execution_args)
  4. Optionally, setup a parameter grid to automate the optimization of hyperparameters
    • PyTools.sklearn_Set_Param_Grid(model_name, estimator_args, grid_search_args)
    • PyTools.sklearn_Get_Best_Params(model_name)
  5. Set feature definitions for the model
    • PyTools.sklearn_Set_Features(model_name, feature_name, variable_type, data_type, feature_strategy, strategy_args)
  6. Fit the model using the training data, and optionally evaluate it using test data
    • PyTools.sklearn_Fit(model_name, n_features)
    • PyTools.sklearn_Partial_Fit(model_name, n_features) (Work in progress)
  7. Optionally, calculate metrics on test data if this was not done together with training
    • PyTools.sklearn_Calculate_Metrics(model_name, n_features)
    • PyTools.sklearn_Get_Metrics(model_name)
    • PyTools.sklearn_Get_Confusion_Matrix(model_name) (Only applicable to classifiers)
  8. Optionally, calculate feature importances to gain a better understanding of the model
    • PyTools.sklearn_Explain_Importances(model_name)
  9. Get predictions from an existing model
    • PyTools.sklearn_Predict(model_name, n_features) (For use in chart expressions)
    • PyTools.sklearn_Bulk_Predict(model_name, key, n_features) (For use in the load script)
    • PyTools.sklearn_Predict_Proba(model_name, n_features) (For use in chart expressions. Only applicable to classifiers)
    • PyTools.sklearn_Bulk_Predict_Proba(model_name, key, n_features) (For use in the load script. Only applicable to classifiers)

Steps 1-8 are done through Qlik's data load processes, while the predictions can be made through either the load script or in real-time using chart expressions.

Preparing data

The first step is to gather the features (i.e. dimensions and measures in Qlik) that will help us predict the target. The target can be discrete labels for a classification problem, or a continuous variable for a regression problem.

This is something where Qlik natively works well; bringing together data from multiple sources, deriving new dimensions and measures and structuring the data into a single table. This table should provide us one row for each sample, with columns for the target and all the features being provided to predict the target.

The first input to our model is this training dataset. If testing and evaluation needs to be done on the same dataset, this SSE can automate the process of splitting the data into training and testing subsets.

training and testing data

Preparing feature definitions

Next, for this implementation, we need to provide feature definitions for our dataset. This metadata can be brought into Qlik from any source such as a file or an internal table.

For each feature, i.e. each column in the dataset, we need to define the following attributes:

Metadata field Description Valid values Remarks
Name A unique name for the feature Any string The feature name must be unique.
Variable Type Identify whether the variable is a feature or target feature, target, excluded, identifier Features marked as excluded or identifier will be ignored.
Data Type Used to covert the data to the correct type bool, int, float, str Specifying data types correctly is necessary due to how data will be exchanged between Qlik and this SSE.
Feature Strategy The feature preparation strategy one hot encoding, hashing, count_vectorizing, tf_idf, text_similarity, scaling, none Strings need to be converted to numerical values for machine learning. The strategies implemented in this SSE to do this are one hot encoding, hashing, count vectorizing, TF-IDF vectorizing and text_similarity. The latter is an approach developed in this SSE to convert strings to their unicode representation and then apply one hot encoding, creating one feature for each unique character in the column. This can be useful when similarity between strings is significant.

Numerical values need to be scaled to avoid bias towards larger numbers.

In general, for discrete values use OHE where the number of unique values is small, otherwise use hashing. For continuous values, use scaling.
Strategy Arguments For hashing: the number of derived features.

For count_vectorizing and tf_idf: the keyword arguments that will be passed to the scikit-learn class		 For hashing this should be an integer e.g. 4

For count_vectorizing and tf_idf this should follow the syntax described under Specifying keyword arguments for scikit-learn classes e.g. 'analyzer=char|str, ngram_range=2;2|tuple|int'		 For hashing the integer should be a power of 2 for the algorithm to work correctly.

The table should look like this:

feature definitions

Setting up the model

The model is set up through the Qlik load script. You should familiarize yourself with the LOAD...EXTENSION syntax.

To set up the model we need to provide a model name and parameters for the estimator, scaler and the SSE itself. The input to the function sklearn_Setup is a table with one row and four columns: Model_Name, EstimatorArgs, ScalerArgs, ExecutionArgs. In the example below the table MODEL_INIT provides the input.

The response is the model name, the result and a timestamp. If successful, this call will save the model to the path qlik-py-tools\qlik-py-env\models.

[Result-Setup]:
LOAD
   model_name,
   result,
   timestamp
EXTENSION PyTools.sklearn_Setup(MODEL_INIT{Model_Name, EstimatorArgs, ScalerArgs, ExecutionArgs});

We then send the feature definitions, i.e. the metadata on our features, to the model. In the sample script below the existing table FEATURES provides us the inputs: Model_Name, Name, Variable_Type, Data_Type, Feature_Strategy, Strategy_Arguments.

[Result-Setup]:
LOAD
   model_name,
   result,
   timestamp
EXTENSION PyTools.sklearn_Set_Features(FEATURES{Model_Name, Name, Variable_Type, Data_Type, Feature_Strategy, Strategy_Arguments});

For details on the format of inputs refer to the Input Specifications.

Training and testing the model

To train the model we need to prepare a temporary table that concatenates all features into a single string. This is due to Qlik currently requiring a fixed number of parameters for SSE function calls.

This table can be set up easily in the load script by concatenating fields using & and the delimiter |. Note that the delimiter must be |.

// Set up a temporary table for the training and test dataset
[TEMP_TRAIN_TEST]:
LOAD
    "Age" & '|' & 
    Attrition & '|' &
    ...
    YearsSinceLastPromotion & '|' &
    YearsWithCurrManager AS N_Features
RESIDENT [Train-Test];

Now we are ready to train the model. The inputs to sklearn_Fit is the table setup earlier with the addition of a field for the model name.

[TEMP_SAMPLES]:
LOAD
   '$(vModel)' as Model_Name,
   N_Features
RESIDENT [TEMP_TRAIN_TEST];

// Use the LOAD...EXTENSION syntax to call the Fit function
[Result-Fit]:
LOAD
   model_name,
   result as fit_result, 
   time_stamp as fit_timestamp, 
   score_result, 
   score
EXTENSION PyTools.sklearn_Fit(TEMP_SAMPLES{Model_Name, N_Features});

Testing strategy

This SSE allows the use of the hold-out method or k-fold cross validation for testing the model. A good explanation of these concepts is available here. You may also want to refer to the scikit-learn article on cross validation.

By default this SSE uses 0.33 of the dataset to test the model and provide a score. This can be controlled through the test_size parameter passed through the execution_args. In practice, this is a simplistic strategy and k-fold cross validation should be considered the preferred approach.

K-fold cross validation can be enabled by passing the cv parameter in execution_args. The value of the parameter should be an integer, e.g. 5 for 5-fold cross validation. For more information refer to the Execution Arguments.

For classification problems, the model score represents accuracy. For regression problems, the model score represents the r2 score.

Evaluation Metrics

Additional metrics are available for evaluating the model when using k-fold cross validation or hold-out testing.

The sklearn_Get_Metrics function can be used if the model was evaluated during the call to sklearn_Fit. This happens by default unless the cv parameter was not passed and test_size is set to zero in the execution arguments.

The sklearn_Get_Metrics function only requires the model name as the input. Arguments to the scikit-learn functions used in calculating the metrics can be provided using the PyTools.sklearn_Setup_Adv function. For more details refer to the section on Metrics Arguments.

The sample below shows the how the metrics can be obtained from the SSE:

[Result-Metrics]:
LOAD *
EXTENSION PyTools.sklearn_Get_Metrics(TEMP_SAMPLES{Model_Name});

The output of the function will depend on the testing method and whether the model is performing classification or regression. Refer to the table below for the output metrics.

Model Type Testing Method Metrics Remarks
Classification Hold-out accuracy, precision, recall, fscore, support
Classification K-fold cross validation accuracy, precision, precision_std, recall, recall_std, fscore, fscore_std With k-fold cross validation, the metrics represent an average taken over subsets of data. The standard deviation helps indicate how actual performance of the model may vary on unseen data.
Regression Hold-out r2_score, mean_squared_error, mean_absolute_error, median_absolute_error, explained_variance_score
Regression K-fold cross validation r2_score, r2_score_std, mean_squared_error, mean_squared_error_std, mean_absolute_error, mean_absolute_error_std, median_absolute_error, median_absolute_error_std, explained_variance_score, explained_variance_score_std With k-fold cross validation, the metrics represent an average taken over subsets of data. The standard deviation helps indicate how actual performance of the model may vary on unseen data.

The sklearn_Calculate_Metrics function takes in a new test dataset, with exactly the same features as the training data, and calculates the metrics. The output fields are the same as the ones described above for sklearn_Get_Metrics for the hold-out method.

[Result-Metrics]:
LOAD *
EXTENSION PyTools.sklearn_Calculate_Metrics(TEMP_SAMPLES{Model_Name, N_Features});

For classifiers you can also obtain a confusion matrix with the function sklearn_Get_Confusion_Matrix. For hold-out testing the matrix is calculated on the test dataset, while for k-fold cross validation the matrices are calculated for the test data in each fold and added up to give results across the entire training data.

[Result-ConfusionMatrix]:
LOAD
   model_name,
   true_label,
   pred_label,
   count
EXTENSION PyTools.sklearn_Get_Confusion_Matrix(TEMP_SAMPLES{Model_Name});

Interpreting the Model

An understanding of the the model can be gained using the sklearn_Explain_Importances function. This function makes use of the Skater library to provide a degree of transparency into the model.

Model interpretability is a developing area in Machine learning, and explaining the results from more complex algorithms is a challenging prospect. For an introduction to the concepts in model interpretability refer to the Skater documentation.

We can call the sklearn_Explain_Importances function in the load script to understand the importance assigned to each feature by the estimator. This can help guide further exploration of the data with Qlik; analyzing how the target changes with selections made to the most influential features.

This function is only valid if calculate_importances=true is passed in the execution arguments. In addition, cv or test_size should be greater than zero in the execution arguments or the sklearn_Calculate_Metrics function should have been called explicitly with a test dataset.

// Remember to pass calculate_importances=true in the execution arguments
LET vExecutionArgs = 'overwrite=true,cv=5,calculate_importances=true';
...

// Use the LOAD...EXTENSION syntax to call the sklearn_Explain_Importances function
[Result-Importances]:
LOAD
    model_name,
    feature_name,
    importance
EXTENSION PyTools.sklearn_Explain_Importances(TEMP_SAMPLES{Model_Name});

This function is valid for all sklearn classifiers and regressors.

For more information on the Execution Arguments refer to the section on Input Specifications.

Making predictions using the model

To make predictions you need to use a trained model. Trained models are found in the SSE under ../qlik-py-tools/qlik-py-env/models.

A list of models can be obtained using the sklearn_List_Models function. The input to this function is a string to search for within the directory. You can also provide an empty string to get a list of all files.

This function is meant to be used in chart expressions, for example it can be used a measure in a text object with the following expression.

'$(=PyTools.sklearn_List_Models(''))'

To make predictions you must provide exactly the same features in exactly the same order as the training data. And as explained in the section above, all features need to be concatenated into a single string. To help with this the function sklearn_Get_Features_Expression provides the expression that can be added to a variable in the load script.

TEMP_MODEL:
LOAD * INLINE [
    'Model_Name'
    'HR-Attrition-LR'
];

[FEATURES_EXPRESSION]:
LOAD
	result as features_expression
EXTENSION PyTools.sklearn_Get_Features_Expression(TEMP_MODEL{Model_Name});

vFeaturesExpression = peek('features_expression', 0, 'FEATURES_EXPRESSION');

Drop tables TEMP_MODEL;

Predictions can be made in a chart expression using the sklearn_Predict function. For classifiers you can use the sklearn_Predict_Proba function to get the predicted class probabilities.

PyTools.sklearn_Predict('HR-Attrition-LR', $(vFeaturesExpression))

Note: As of the June 2018 release, the expression above can be used as a dimension in the table object, allowing you to make selections on the prediction results. However, the prediction expression should not be stored as a master item dimension as this can lead to unstable behavior.

Predictions can also be made in the load script using the sklearn_Bulk_Predict method. For classifiers you can also use the sklearn_Bulk_Predict_Proba function to get the predicted class probabilities.

The input to the bulk prediction functions must include a key, which is simply returned back and can be used to link the predictions in the Qlik data model.

[TEMP_SAMPLES_WITH_KEYS]:
LOAD
   Model_Name,
   EmployeeNumber as Key,
   N_Features
RESIDENT [TEMP_SAMPLES];

[Predictions]:
LOAD
   model_name,
   key,
   prediction
EXTENSION PyTools.sklearn_Bulk_Predict(TEMP_SAMPLES_WITH_KEYS{Model_Name, Key, N_Features});

Unsupervised Machine Learning

This SSE also provides capabilities for dimensionality reduction and clustering. These are implemented using the Matrix Decomposition and Clustering classes available in scikit-learn. The basic flow for unsupervised machine learning is described below:

  1. Prepare the features in Qlik
  2. Prepare feature definitions in Qlik
  3. Setup the model with relevant parameters
    • PyTools.sklearn_Setup(model_name, estimator_args, scaler_args, execution_args)
    • PyTools.sklearn_Setup_Adv(model_name, estimator_args, scaler_args, metric_args, dim_reduction_args, execution_args)
  4. Set feature definitions for the model
    • PyTools.sklearn_Set_Features(model_name, feature_name, variable_type, data_type, feature_strategy, strategy_args)
  5. Fit the model and get the results
    • PyTools.sklearn_Fit_Transform(model_name, key, n_features) (For use in the load script. Only applicable for dimensionality reduction)
    • PyTools.sklearn_Fit_Predict(model_name, n_features) (For use in chart expressions. Only applicable for clustering)
    • PyTools.sklearn_Bulk_Fit_Predict(model_name, key, n_features) (For use in the load script. Only applicable for clustering)

Steps 1 to 4 are described in detail under Supervised Machine Learning.

Matrix Decomposition

Matrix decomposition algorithms such as Principal Component Analysis (PCA) allow data to be reduced to a smaller number of dimensions. While these algorithms are often used as part of a supervised machine learning pipeline, they can also be used on their own.

Dimensionality reduction can be called in the Qlik load script with the function PyTools.sklearn_Fit_Transform. The function returns the model name, the key field and a number of dimensions based on the estimator arguments, usually based on the n_components parameter.

// Call to PCA estimator that was setup with 'estimator=PCA, n_components=2|int'
[PCA]:
LOAD 
    key as PCA_Key,
    dim_1 as PCA_Dim1,
    dim_2 as PCA_Dim2
EXTENSION PyTools.sklearn_Fit_Transform(TEMP_SAMPLES{Model_Name, Key, N_Features});

Clustering

Clustering algorithms available in scikit-learn can be used using the PyTools.sklearn_Fit_Predict and PyTools.sklearn_Bulk_Fit_Predict functions for chart expressions and the load script respectively. These functions return the cluster label for each sample in the data.

// Call to the SpectralClustering estimator
[Clusters]:
LOAD 
    key as PCA_Key,
    label as [Spectral Cluster Label]
EXTENSION PyTools.sklearn_Bulk_Fit_Predict(TEMP_SAMPLES{Model_Name, Key, N_Features});

Additional Functionality

The basic machine learning flow described above can be enhanced with additional functionality provided by this SSE.

Optimizing hyperparameters for an estimator

A key step in building a good model is determining the best hyperparameters for the estimator. This process can be automated given a parameter grid and performing a search across combinations of the specified parameter values for the estimator. For more information see the scikit-learn documentation on tuning the hyper-parameters of an estimator

To provide a parameter grid we use the PyTools.sklearn_Set_Param_Grid function. This will automatically result in hyperparameter optimization being performed using the sklearn model_selection.GridSearchCV class. If the parameter grid is set up, the optimization will be performed as part of the fit method.

Generally, we would set up the grid after the initial call to PyTools.sklearn_Setup. We do this by calling the PyTools.sklearn_Set_Param_Grid function with the model name, the hyperparameter combinations to be evaluated as well as arguments for the grid search itself.

// Set up a variable for grid search parameters
LET vGridSearch = 'scoring=f1_micro|str';

[PARAM_GRID]:
LOAD
    [Model Name] as Model_Name,
    [Hyperparameters],
    '$(vGridSearch)' as GridSearchArgs  
RESIDENT Optimization
WHERE [Model Name] = '$(vModel)';

// Use the LOAD...EXTENSION syntax to call the Setup function
[Result-Setup]:
LOAD
    model_name,
    result,
    timestamp
EXTENSION PyTools.sklearn_Set_Param_Grid(PARAM_GRID{Model_Name, Hyperparameters, GridSearchArgs});

For a working example refer to the Parameter Tuning sample app. For details on the format of inputs refer to the Input Specifications.

Training multiple estimators

Multiple estimators can be trained with the same dataset by using Qlik's FOR EACH...NEXT load script syntax.

This is demonstrated in the Train & Test sample app.

Out-of-core learning

Some of the scikit-learn algorithms allow for out-of-core learning, i.e. training a model in batches where the dataset is too large to fit into memory. For more information refer to the scikit-learn documentation.

This capability is currently a work in progress.

Dimensionality reduction

A very large number of features can have a negative impact on the model. This is called the curse of dimensionality.

This problem can be addressed by using dimensionality reduction before the estimator is fit to the data. You can add dimensionality reduction to the model by specifying it during the setup using the sklearn_Setup_Adv function.

LET DimReductionArgs = 'reduction=PCA';
...

[Result-Setup]:
LOAD
   model_name,
   result,
   timestamp
EXTENSION PyTools.sklearn_Setup_Adv(MODEL_INIT{Model_Name, EstimatorArgs, ScalerArgs, MetricArgs, DimReductionArgs, ExecutionArgs});

For details on the format of inputs refer to the Input Specifications.

What-if analysis

When making predictions, you can use Qlik expressions for input features. This gives you the flexibility to control certain features using variables in Qlik and assess the change to the predictions. This is demonstrated in the What-if Analysis sheet in the Predict sample app.

Note that the expression must retain the data type defined in the model's feature definitions.

Input Specifications

This sections provides the specific syntax required for arguments to the PyTools.sklearn functions.

In general, arguments are passed as strings to this SSE using the syntax argument=value. Multiple arguments within a string have to be separated by a comma, with single quotes around the entire string. For example:

// Set up a variable for execution parameters
LET vExecutionArgs = 'overwrite=true,test_size=0.3,debug=true';

Specifying keyword arguments for scikit-learn classes

Many of the functions defined in this SSE accept additional keyword arguments for the relevant scikit-learn class. You should refer to the scikit-learn API for documentation on the parameters available for each class.

For the simple data types bool, int, float, and str, the format for such keyword arguments must take the form arg=value|type. Such arguments can be combined into a single string with the named parameters described in the sections below. For example:

'scaler=StandardScaler, with_mean=true|bool, with_std=true|bool'

In addition this SSE accepts lists, arrays and tuples with the syntax arg=item1;item2;item3|object_type|value_type. For example:

'arg=1;2;3|list|int'
'arg=x;y;z|array|str'
'arg=0;1|tuple|int'

Finally dictionaries are accepted with the syntax arg=x:1;y:2|dict|key_type|value_type. For example:

'arg=x:1;y:2|dict|str|int'

Execution Arguments

These arguments define the flow for the model. These settings are made once during the model setup and apply to subsequent calls to the model where relevant.

If you want to use default values you can simply pass an empty string for ExecutionArgs when setting up the model.

Keyword Description Sample Values Remarks
overwrite Specify whether any existing model with the same name should be overwritten true, false Defaults to true.
test_size Set the ratio that will be used to split the samples into training and testing data sets 0.3 Defaults to 0.33.
cv Enable k-fold cross validation 5 Defaults to 0 in which case the hold-out testing strategy is used as per test_size.

The value represents the cross validation splitting strategy as defined in the scikit-learn cross_validate method.

Refer to the Testing strategy section for further explanation.
random_state Seed used by the random number generator when generating the training testing split 42 Default to 42.

Must be an integer.
compress Compression level between 1-9 used by joblib when saving the model 1 Defaults to 3.
retain_data Flag to determine if the training and test data should be saved in the model true, false Defaults to false as this adds to the size of the model on disk.
calculate_importances Flag to determine if feature importances should be calculated during model evaluation true, false Defaults to false as this adds to the processing time.
debug Flag to output additional information to the terminal and logs true, false Defaults to false.

Information will be printed to the terminal as well to a log file: qlik-py-tools\qlik-py-env\core\logs\SKLearn Log <n>.txt.

Scaler Arguments

These arguments specify how numerical data will be standardized before being sent to the machine learning algorithm. Standardization of the data is a common requirement for machine learning algorithmns and helps avoid bias towards certain features. If you want to use default values you can simply pass an empty string for ScalerArgs when setting up the model.

In this implementation we use the sklearn.preprocessing package for scaling data.

Keyword Description Sample Values Remarks
scaler scikit-learn class that will be used for scaling numeric data StandardScaler, MinMaxScaler, MaxAbsScaler, RobustScaler, QuantileTransformer Defaults to StandardScaler.

Mandatory argument if the scaler arguments are not an empty string.
missing Strategy to use for missing/null values mean, median, mode, zeros, none Defaults to zeros.

This setting only applies to numerical features. If you want Null values to be taken into consideration for text features, replace them with an appropriate string in Qlik.
scale_hashed Whether to scale hashed features true, false Defaults to true.

At times machine learning requires trial and error. You may want to control this setting and see the impact on the results.
scale_vectors Whether to scale count vectorized and TF-IDF vectorized features true, false Defaults to true.

Same as above. You may want to control this setting and see the impact on the results.

In addition to the standard parameters above, you can provide any valid key word arguments accepted by the scikit-learn preprocesing class specified under the scaler argument above. Refer to the specifictions under Specifying keyword arguments for scikit-learn classes

For more information on available parameters refer to the scikit-learn API.

Estimator Arguments

Any of the classification and regression algorithms in scikit-learn can be used with this SSE. For more information refer to scikit-learn.org.

Keyword Description Sample Values Remarks
estimator The chosen estimator for the model Classifiers: AdaBoostClassifier, BaggingClassifier, DummyClassifier, ExtraTreesClassifier, GradientBoostingClassifier, RandomForestClassifier, VotingClassifier, GaussianProcessClassifier, LogisticRegression, LogisticRegressionCV, PassiveAggressiveClassifier, Perceptron, RidgeClassifier, RidgeClassifierCV, SGDClassifier, BernoulliNB, GaussianNB, MultinomialNB, KNeighborsClassifier, RadiusNeighborsClassifier, MLPClassifier, LinearSVC, NuSVC, SVC, DecisionTreeClassifier, ExtraTreeClassifier

Regressors: AdaBoostRegressor, BaggingRegressor, DummyRegressor, ExtraTreesRegressor, GradientBoostingRegressor, RandomForestRegressor, GaussianProcessRegressor, LinearRegression, PassiveAggressiveRegressor, RANSACRegressor, Ridge, RidgeCV SGDRegressor, TheilSenRegressor, KNeighborsRegressor, RadiusNeighborsRegressor, MLPRegressor, LinearSVR, NuSVR, SVR, DecisionTreeRegressor, ExtraTreeRegressor, ARDRegression, BayesianRidge, ElasticNet, ElasticNetCV, HuberRegressor, Lars, LarsCV, Lasso, LassoCV, LassoLars, LassoLarsCV, LassoLarsIC, MultiTaskLasso, MultiTaskElasticNet, MultiTaskLassoCV, MultiTaskElasticNetCV, OrthogonalMatchingPursuit, OrthogonalMatchingPursuitCV

Matrix Decomposition:PCA, KernelPCA, IncrementalPCA, TruncatedSVD, FactorAnalysis, FastICA, NMF, SparsePCA, DictionaryLearning, LatentDirichletAllocation, MiniBatchDictionaryLearning, MiniBatchSparsePCA

Clustering: AffinityPropagation, AgglomerativeClustering, Birch, DBSCAN, FeatureAgglomeration, KMeans, MiniBatchKMeans, MeanShift, SpectralClustering		 Mandatory when supplying estimator arguments.

Additional arguments for the estimator should be included in the estimator_args string when calling the PyTools.sklearn_Setup or PyTools.sklearn_Setup_Adv functions. The syntax for this is described under Specifying keyword arguments for scikit-learn classes. However, if performing hyperparameter optimisation using a grid search, these additional arguments will be ignored.

Grid Search Arguments

A grid search can be used to optimize hyperparameters for an estimator. This functionality makes use of the model_selection.GridSearchCV class. For details on the available parameters refer to the scikit-learn API.

Note that the parameter refit is fixed to True for this implementation.

For setting up the parameter grid, we need to supply a string that contains a list for each hyperparameter to be optimized. As an example refer to the sample data set below used in the Parameter Tuning sample app. Note how the combinations to be tried for every parameter need to be specied as a list with the appropriate data type.

The syntax for the hyperparameters is based on the specifictions under Specifying keyword arguments for scikit-learn classes.

[PARAMETER_GRID]:
LOAD * INLINE [
    'Model Name' 'Hyperparameters'
    'HR-Attrition-RF' 'n_estimators=5;10;15|list|int, criterion=gini;entropy|list|str, max_depth=None;2;5|list|int'
    'HR-Attrition-LR' 'penalty=l1|list|str, C=0.25;0.5;1;2;5;10|list|float, solver=liblinear;saga|list|str'
    'HR-Attrition-LR' 'penalty=l2|list|str, C=0.25;0.5;1;2;5;10|list|float, solver=newton-cg;lbfgs;sag|list|str'
    'HR-Attrition-SGD' 'loss=hinge;log;perceptron;modified_huber|list|str, penalty=l1;l2|list|str, alpha=0.0001;0.0002;0.0005;0.001|list|float'
    'HR-Attrition-SVC'	'C=0.25;0.5;1;2;5|list|float, kernel=rbf;linear;poly;sigmoid|list|str'
    'HR-Attrition-MLP'	'activation=relu;identity;logistic;tanh|list|str, solver=lbfgs;sgd;adam|list|str, learning_rate=constant;invscaling;adaptive|list|str'
];

Metrics Arguments

Model evaluation metrics are calculated by the PyTools.sklearn_Fit and PyTools.sklearn_Calculate_Metrics functions.

For classification, metrics are calculated using the scikit-learn class metrics.precision_recall_fscore_support. The accuracy is available from the estimator's score method. When using k-fold cross validation the metrics are calculated using the methods precision_score, recall_score, f1_score.

For regression, metrics are calculated using metrics.mean_squared_error, metrics.mean_absolute_error, metrics.median_absolute_error, metrics.explained_variance_score. The r2 score is available from the estimator's score method.

Arguments for the metrics other than those coming from the estimator's score method can be provided by using the PyTools.sklearn_Setup_Adv function instead of the standard PyTools.sklearn_Setup function.

[Result-Setup]:
LOAD
   model_name,
   result,
   timestamp
EXTENSION PyTools.sklearn_Setup_Adv(MODEL_INIT{Model_Name, EstimatorArgs, ScalerArgs, MetricArgs, DimReductionArgs, ExecutionArgs});

Metric arguments should be specified as a string using the syntax described under Specifying keyword arguments for scikit-learn classes.

Dimensionality Reduction Arguments

You can include dimensionality reduction in the machine learning flow by using any valid class from sklearn-decomposition.

Add this step by using the PyTools.sklearn_Setup_Adv function instead of the standard PyTools.sklearn_Setup function.

[Result-Setup]:
LOAD
   model_name,
   result,
   timestamp
EXTENSION PyTools.sklearn_Setup_Adv(MODEL_INIT{Model_Name, EstimatorArgs, ScalerArgs, MetricArgs, DimReductionArgs, ExecutionArgs});
Keyword Description Sample Values Remarks
reduction The chosen matrix decomposition algorithm for the model PCA, KernelPCA, IncrementalPCA Mandatory argument if using PyTools.sklearn_Setup_Adv and the dimensionality reduction arguments are not an empty string.

The arguments for the algorithm should be included in the argument string using the syntax described under Specifying keyword arguments for scikit-learn classes.

Attribution

The data used in the sample apps was obtained from https://www.kaggle.com: