diff --git a/docs/atxmega.md b/docs/atxmega.md
index 248ba300e..d1ebf61e6 100644
--- a/docs/atxmega.md
+++ b/docs/atxmega.md
@@ -40,12 +40,11 @@ ISR(TCE0_OVF_vect)
 ```
 Declare the rf24 radio with `RF24 radio(XMEGA_PORTC_PIN3, XMEGA_SPI_PORT_C);`
 
-First parameter is the CE pin which can be any available pin on the uC.
-
-Second parameter is the CS which can be on port C (**XMEGA_SPI_PORT_C**) or on port D (**XMEGA_SPI_PORT_D**).
+1. First parameter is the CE pin which can be any available pin on the microcontroller.
+2. Second parameter is the CS which can be on port C (**XMEGA_SPI_PORT_C**) or on port D (**XMEGA_SPI_PORT_D**).
 
 Call the `__start_timer()` to start the millisecond timer.
 
-@note Note about the millisecond functionality:<br>
+@note
 The millisecond functionality is based on the TCE0 so don't use these pins as IO.<br>
-The operating frequency of the uC is 32MHz. If you have other frequency change the TCE0 registers appropriatly in function `__start_timer()` in **compatibility.c** file for your frequency.
+The operating frequency of the uC is 32MHz. If you have a different frequency, change the TCE0 registers appropriatly in function `__start_timer()` in **compatibility.c** file for your frequency.
diff --git a/utility/ATXMegaD3/README.md b/utility/ATXMegaD3/README.md
deleted file mode 100644
index 6b704fa71..000000000
--- a/utility/ATXMegaD3/README.md
+++ /dev/null
@@ -1,54 +0,0 @@
-This is a fork from **http://nRF24.github.io/RF24** which can be build as a static library for Atmel Studio 7.
-
-Not all files are needed.
-
-Just copy the following structure into a GCC Static Library project in AS7:
-```
-utility\
-  ATXMega256D3\
-    compatibility.c
-    compatibility.h
-    gpio.cpp
-    gpio.h
-    gpio_helper.c
-    gpio_helper.h
-    includes.h
-    RF24_arch_config.h
-    spi.cpp
-    spi.h
-nRF24L01.h
-printf.h
-RF24.cpp
-RF24.h
-RF24_config.h
-```
-
-Only ATXMega256D3 is supported right now!
-
-## Notes
-The millisecond functionality is based on the TCE0 so don't use these pins as IO.
-
-The operating frequency of the uC is 32MHz. If else change the TCE0 registers appropriatly in function **__start_timer()** in **compatibility.c** file for your frequency.
-
-
-## Usage
-Add the library to your project!
-In the file where the **main()** is put the following in order to update the millisecond functionality:
-```
-ISR(TCE0_OVF_vect)
-{
-	update_milisec();
-}
-```
-
-Declare the rf24 radio with **RF24 radio(XMEGA_PORTC_PIN3, XMEGA_SPI_PORT_C);**
-
-First parameter is the CE pin which can be any available pin on the uC.
-
-Second parameter is the CS which can be on port C (**XMEGA_SPI_PORT_C**) or on port D (**XMEGA_SPI_PORT_D**).
-
-Call the **__start_timer()** to start the millisecond timer.
-
-
-
-** For further information please see http://nRF24.github.io/RF24 for all documentation**
diff --git a/utility/Due/RF24_arch_config.h b/utility/Due/RF24_arch_config.h
index 9a69eb155..a25670709 100644
--- a/utility/Due/RF24_arch_config.h
+++ b/utility/Due/RF24_arch_config.h
@@ -19,8 +19,7 @@
 #include <SPI.h>
 
 #define _BV(x) (1<<(x))
-#define _SPI SPIClass
-#define RF24_SPI_PTR
+#define _SPI SPI
 
 #ifdef SERIAL_DEBUG
     #define IF_SERIAL_DEBUG(x) ({x;})