Plotting multiple sets of grain boundaries on one map

[alexcaustin]

Hello,
I am trying to plot grain boundary traces calculated in two different way on top of each other on an ipf map. I have used OIM to calculate these segments but want to use MTex to make the plots. Is there a way of plotting reconstructed boundary segemnts exported from OIM (example file attached) on top of an ipf map?

Thanks!
recon_boundaries.txt

[kilir]

Hi,

Mtex does not currently have an interface for such kind of data. Probably easiest would be if you can export your segmented EBSD data from your software with a grain Id such that you can reconstruct grains in mtex based on that id.

Cheers,

Rüdiger

[alexcaustin]

Hi Rüdiger, Thanks for getting back to me, that's good to know. I will give this a try. I have another, unrelated question. I'm trying to plot a full GBCD on an equal angle plot. I know the default in MTex is equal area but I don't seem to be able to change this. I have tried 'plotGBPD(gbpd,cs,'projection','stereo')' and the 'eangle' command but haven't had any luck. Thanks for your help, Alex

…

________________________________ From: Rüdiger Kilian ***@***.***> Sent: 27 July 2024 2:11 PM To: mtex-toolbox/mtex ***@***.***> Cc: Austin, Alex ***@***.***>; Author ***@***.***> Subject: Re: [mtex-toolbox/mtex] Plotting multiple sets of grain boundaries on one map (Discussion #2175) This email from ***@***.*** originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list<https://spam.ic.ac.uk/SpamConsole/Senders.aspx> to disable email stamping for this address. Hi, Mtex does not currently have an interface for such kind of data. Probably easiest would be if you can export your segmented EBSD data from your software with a grain Id such that you can reconstruct grains in mtex based on that id. Cheers, Rüdiger — Reply to this email directly, view it on GitHub<#2175 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AUD2XPTZOQIHBPERLC57XMDZOOL6RAVCNFSM6AAAAABLKGXA5KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJWG4ZDOOI>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[ralfHielscher]

Hi Alex,

could you please post your question in a separate post?

Thank you very much,
Ralf.

[alexcaustin]

Hi Ralf,

Okay, will do!

Thanks,
Alex