| title | description | addedAt | pageClass |
|---|---|---|---|
Vimar 14594 control via MQTT |
Integrate your Vimar 14594 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. |
2021-02-28 13:58:01 UTC |
device-page |
| Model | 14594 |
| Vendor | Vimar |
| Description | Roller shutter with slat orientation and change-over relay |
| Exposes | cover (state, position), linkquality |
| Picture |  |
How to use device type specific configuration
invert_cover: Inverts the cover position, false: open=100,close=0, true: open=0,close=100 (default false). The value must betrueorfalse
The current state of this cover is in the published state under the state property (value is OPEN or CLOSE).
To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}.
It's not possible to read (/get) this value.
To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.