Support this project on Ko-fi!
This integration allows you to control and monitor your Mammotion Luba, Luba 2 & Yuka robot mowers using Home Assistant.
- Bluetooth (BLE) support
- Wi-Fi support
- Scheduling
- Mapping and zone management
- Firmware updates
- Automations
- More...
- Start and stop the mower
- Monitor the mower's status (e.g., mowing, charging, idle)
- View the mower's battery level
- More features being added all the time!
- Home Assistant installed and running
- Mower connected to your home network
- Bluetooth proxy for Home Assistant
Here's a cleaned-up version of the installation instructions for your GitHub repo README:
Once the integration is set up, you can control and monitor your Mammotion mower using Home Assistant. 🎉
If you encounter any issues with the Mammotion integration, please check the Home Assistant logs for error messages. You can also try the following troubleshooting steps:
- Verify that you have Bluetooth proxy setup with Home Assistant.
- Ensure that your mower is connected to your home network and accessible from Home Assistant.
- Restart Home Assistant and check if the issue persists.
This integration uses the PyMammotion library to communicate with Mammotion mowers. PyMammotion provides a Python API for controlling and monitoring Mammotion robot mowers via MQTT, Cloud, and Bluetooth.
If the problem continues, please file an issue on the GitHub repository for further assistance. 🙏
Thank you so much!