diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34331.rst b/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34331.rst deleted file mode 100644 index f44ef6218d7b..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34331.rst +++ /dev/null @@ -1,2 +0,0 @@ -- Correct the tabbing order between widgets on the Engineering Diffraction interface. -- Add a scrollbar to the GSASII tab to allow a smaller interface height, like the fitting tab. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34763.rst b/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34763.rst deleted file mode 100644 index 099b13dfdf55..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34763.rst +++ /dev/null @@ -1 +0,0 @@ -- SaveVulcanGSS algorithm marked as deprecated as of 2022-11-30 \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34875.rst b/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34875.rst deleted file mode 100644 index 59092e98b1bf..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Engineering/Bugfixes/Used/34875.rst +++ /dev/null @@ -1 +0,0 @@ -- Check that there is enough data points before attempting to fit a diffraction peak in :ref:`FitPeaks ` diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34776.rst b/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34776.rst deleted file mode 100644 index b6c9762bca4f..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34776.rst +++ /dev/null @@ -1 +0,0 @@ -- An indeterminate progress bar has been added below the FitPropertyBrowser on the Engineering Diffraction Fitting tab. This will display when the fit is in progress and whether the recent fit status was success or fail. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34790.rst b/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34790.rst deleted file mode 100644 index d8c3a2cf02ba..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Engineering/New_features/Used/34790.rst +++ /dev/null @@ -1 +0,0 @@ -- On the GSASII tab, when a successful refinement is run, the output table workspace for the lattice parameters now includes the Microstrain value and the column title is marked when this parameter has been refined. A similar instrument parameter table workspace is now also generated which includes Sigma-1 and Gamma(Y), with a refined flag, and the fitting range. The Pawley reflections are output to a separate table workspace if they are available. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34702.rst b/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34702.rst deleted file mode 100644 index fe3cdb8d8a8f..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34702.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed an issue with :ref:`HB2AReduce ` when 'colltrans' column is not available in the data file. This corresponds to the situation when the 'colltrans' motor is not connected. diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34725.rst b/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34725.rst deleted file mode 100644 index 1b4ae40cfc11..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34725.rst +++ /dev/null @@ -1 +0,0 @@ -- Change to use time average mean value of logs in :ref:`PDDetermineCharacterizations ` diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34778.rst b/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34778.rst deleted file mode 100644 index 973c6ba7023a..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/Bugfixes/Used/34778.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix problem when calling focus twice in a reduction using the ISIS Powder diffraction scripts. The second run of focus was using a partially processed input file from the first focus resulting in some of the reduction steps (normalisation, absorption correction) were being run twice \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Powder/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34149.rst b/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34149.rst deleted file mode 100644 index c015975b5a4c..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34149.rst +++ /dev/null @@ -1 +0,0 @@ -- Added support for ILL D4C instrument, a liquid diffractometer. This adds a new algorithm responsible for the reduction stage: :ref:`D4ILLReduction `, which handles calling the loader, correcting for dead time, bank position offsets, relative efficiency, and normalisation to monitor or time. diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34754.rst b/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34754.rst deleted file mode 100644 index 927fc82f024d..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34754.rst +++ /dev/null @@ -1 +0,0 @@ -- Introduce an input parameter in :ref:`WANDPowderReduction ` to specify that the input workspaces are from event filtering. In such a situation, the overall reduction time could be reduced significantly. diff --git a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34822.rst b/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34822.rst deleted file mode 100644 index e30243ef4e9d..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Powder/New_features/Used/34822.rst +++ /dev/null @@ -1 +0,0 @@ -- Increase the speed of the fourier filter in the POLARIS total scattering reduction by reducing the Rmax parameter used in the pair of (forward and backward) PDFFourierTransform calls and optimising the integration code inside :ref:`PDFFourierTransform v2 ` diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34429.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34429.rst deleted file mode 100644 index 72cd2f8e6b92..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34429.rst +++ /dev/null @@ -1,3 +0,0 @@ -- Ensuring colorscale max > min (found for weak peaks with pixels having 0 intensity) in :ref:`IntegratePeaksSkew `. -- :ref:`IntegratePeaksSkew ` will now close a generated figure if an error occured while trying to write to file (e.g. file of same name was already open) -- Fix bug that didn't set HKL of peak if ``UpdatePeakPosition = True`` in :ref:`IntegratePeaksSkew ` \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34506.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34506.rst deleted file mode 100644 index 6247d2f3716d..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34506.rst +++ /dev/null @@ -1,2 +0,0 @@ -- Fix bugs in :ref:`SelectCellWithForm ` and ref:`SelectCellOfType ` that incorrectly transform modulation vectors. -- Fix bug where modulation vectors are not transformed in :ref:`TransformHKL `. diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34623.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34623.rst deleted file mode 100644 index 5719f6a08928..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34623.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix issue where :ref:`LoadIsawPeaks ` fails when loading peaks with modulation vectors that cannot recover modulated UB matrix. diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34796.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34796.rst deleted file mode 100644 index 427cf733ff9a..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34796.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`SaveReflections ` now warns if an empty peak table is saved and doesn't fail with an error \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34889.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34889.rst deleted file mode 100644 index a3f295bb1324..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34889.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`IntegratePeaksProfileFitting ` library `ICCFitTools` module updated to support more recent versions of SciPy where the factorial function moved from `scipy.misc.factorial` to `scipy.special.factorial`. On newer versions of SciPy, the algorithm previously failed. diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34914.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34914.rst deleted file mode 100644 index c6d81cec50b3..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34914.rst +++ /dev/null @@ -1 +0,0 @@ -- Replaced deprecated NumPy `np.int` type in :ref:`ConvertWANDSCDtoQ `. diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34971.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34971.rst deleted file mode 100644 index f9c86cec4765..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/Bugfixes/Used/34971.rst +++ /dev/null @@ -1 +0,0 @@ -- Replaced deprecated Matplotlib `bivariate_normal` function in `BVGFitTools.py` diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/.gitkeep b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34429.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34429.rst deleted file mode 100644 index c28bcce86040..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34429.rst +++ /dev/null @@ -1,3 +0,0 @@ -* Added two options to :ref:`IntegratePeaksSkew `: to scale angular resolution parameter (``ThetaWidth``) by wavelength, and to specify minimum number of TOF bins in a valid peak (``NTOFBinsMin``). -* Improve estimation of resolution parameters in :ref:`IntegratePeaksSkew ` (more robust to outliers). -* Made Lorentz correction in :ref:`IntegratePeaksSkew ` optional. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34657.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34657.rst deleted file mode 100644 index 60a0d1a8f4ac..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34657.rst +++ /dev/null @@ -1,3 +0,0 @@ -* Added new option to :ref:`IntegratePeaksSkew `: to get initial TOF window from back-to-back exponential coefficients if specified in the instrument parameters.xml -* Added back-to-back exponential coefficients to SXD parameters.xml file -* Simplified input arguments to :ref:`IntegratePeaksSkew `: the parameter `FractionalTOFWindow` has been removed, if a user wants to integrate with an initial window dTOF/TOF = constant for all peaks then this can be achieved by setting ThetaWidth = 0 - note this is technically a breaking change. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34729.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34729.rst deleted file mode 100644 index aa5e1c173d40..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34729.rst +++ /dev/null @@ -1 +0,0 @@ -* Parallelize loop over peaks in IntegratePEaksMD which provides significant speed-up for ellipsoid integration. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34767.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34767.rst deleted file mode 100644 index 3be60b24eecb..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34767.rst +++ /dev/null @@ -1 +0,0 @@ -* Added back bank 14 to TOPAZ for a total of 20 banks diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34861.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34861.rst deleted file mode 100644 index f3119225636f..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34861.rst +++ /dev/null @@ -1 +0,0 @@ -* New algorithm :ref:`SaveINS ` to write a .ins input file for SHELX diff --git a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34890.rst b/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34890.rst deleted file mode 100644 index 7ef175414456..000000000000 --- a/docs/source/release/v6.6.0/Diffraction/Single_Crystal/New_features/Used/34890.rst +++ /dev/null @@ -1 +0,0 @@ -* Exposed indexing tolerance for :ref:`SCDCalibratePanels ` when using `RecalculateUB` option. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/Bugfixes/Used/34594.rst b/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/Bugfixes/Used/34594.rst deleted file mode 100644 index bd5f62eb9951..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/Bugfixes/Used/34594.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed transcription error in Table 3 of :ref:`Crystal Field Theory` documentation \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/New_features/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/CrystalField/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34564.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34564.rst deleted file mode 100644 index 7fa828d8ab24..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34564.rst +++ /dev/null @@ -1 +0,0 @@ -- A crash is now avoided when extracting a tube in ALFView while an invalid axis is selected. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34638.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34638.rst deleted file mode 100644 index aec839a9fadf..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34638.rst +++ /dev/null @@ -1 +0,0 @@ -- The plotting panel on the ALFView pick tab is now expanded by default when first opening the interface. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34663.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34663.rst deleted file mode 100644 index 584230dbdd64..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34663.rst +++ /dev/null @@ -1 +0,0 @@ -- It is now possible to delete the workspace loaded into ALFView and then load in a new dataset without issue diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34800.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34800.rst deleted file mode 100644 index c0f5649149b3..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/Bugfixes/Used/34800.rst +++ /dev/null @@ -1 +0,0 @@ -- Corrected a repeated call to the loader while merging runs in the :ref:`PelicanReduction ` algorithm. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34558.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34558.rst deleted file mode 100644 index 7988d990defc..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34558.rst +++ /dev/null @@ -1,14 +0,0 @@ -- The ability to load an optional vanadium run into ALFView for normalisation is now possible. This vanadium run is saved between sessions. -- The tools in the PickTab of ALFView which are not useful for the main workflow have been hidden. -- The 'Select whole tube' tool on the Pick tab can now be used to select individual tubes. -- The 'Draw a rectangle' tool on the Pick tab can now be used to select one or more neighbouring tubes. -- The 'Edit a shape' tool on the Pick tab can now be used to select, move, resize and delete highlighted tubes. -- The 'Update Estimate' button has been removed in ALFView. An estimate value for the peak centre is automatically re-calculated whenever the tube selection changes. -- An option to export the right hand side plot to a workspace has been added (top right). -- An option to open the right hand side plot in a new window to allow more plotting customizations has been added (top right). -- An option to reset the extracted data in the right hand side plot has been added (top right). -- The average two theta value is now displayed in ALFView when a tube is selected (bottom right). -- The number of selected tubes is now displayed in ALFView when the tube selection is changed (bottom right). -- The FunctionBrowser widget has been replaced with a box to specify the peak centre of a Flat Background + Gaussian in ALFView. -- The 'Fit' button will now trigger the calculation of the Rotation angle, if the Fit is successful. -- Updated the documentation for the ALFView interface. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34626.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34626.rst deleted file mode 100644 index 4fc2f88ed3c5..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34626.rst +++ /dev/null @@ -1 +0,0 @@ -- By default on ALFView, the mini plot on the pick tab will now select the 'Out of plane angle' axis and 'Integrate' when the ``Select whole tube`` button is pressed. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34654.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34654.rst deleted file mode 100644 index 32d7e51aa908..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34654.rst +++ /dev/null @@ -1 +0,0 @@ -- The FunctionBrowser in ALFView has been replaced with a box for entering the PeakCentre parameter. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34748.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34748.rst deleted file mode 100644 index ff04267f5667..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34748.rst +++ /dev/null @@ -1 +0,0 @@ -- Added :ref:`LagrangeILLReduction `, which handles loading and data reduction from IN1 - Lagrange at ILL. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34837.rst b/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34837.rst deleted file mode 100644 index 7d739d756941..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/General/New_features/Used/34837.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`LagrangeILLReduction ` now allows the user to select normalisation approach, loads time and temperature metadata from the ASCII files, and properly handles interpolation and energy range of the water correction depending on the user's choice of `UseIncidentEnergy` property value. diff --git a/docs/source/release/v6.6.0/Direct_Geometry/MSlice/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/MSlice/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Direct_Geometry/MSlice/Bugfixes/Used/35188.rst b/docs/source/release/v6.6.0/Direct_Geometry/MSlice/Bugfixes/Used/35188.rst deleted file mode 100644 index e1736a1ffa0b..000000000000 --- a/docs/source/release/v6.6.0/Direct_Geometry/MSlice/Bugfixes/Used/35188.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug that prevented cuts along 2Theta. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Direct_Geometry/MSlice/New_features/.gitkeep b/docs/source/release/v6.6.0/Direct_Geometry/MSlice/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34510.rst b/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34510.rst deleted file mode 100644 index b307efe2536f..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34510.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix problem in :ref:`CreateSampleWorkspace ` where functions were evaluated at left hand bin edge instead of bin centre. The algorithm :ref:`FindEPP ` has also been updated with a similar change \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34665.rst b/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34665.rst deleted file mode 100644 index 59e67be0b069..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34665.rst +++ /dev/null @@ -1 +0,0 @@ -- fix problem with the :ref:`ConvolveWorkspaces ` algorithm when run on input workspaces with different x ranges. The x range of the output workspace was being taken from the resolution workspace instead of the data workspace \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34768.rst b/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34768.rst deleted file mode 100644 index 431c5090eb3e..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34768.rst +++ /dev/null @@ -1 +0,0 @@ -- The algorithm GUI for UpdateInstrumentFromFile now accepts .DAT files for the Filename property. diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34801_FixMDEWorkspaceLoadTimes.rst b/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34801_FixMDEWorkspaceLoadTimes.rst deleted file mode 100644 index 742f0eda6d83..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/Bugfixes/Used/34801_FixMDEWorkspaceLoadTimes.rst +++ /dev/null @@ -1 +0,0 @@ -- Reworked loadPropertyCommon to fix an issue with loading MDE worksapces taking long time to load diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/.gitkeep b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34306_LoadSANS1MLZ.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34306_LoadSANS1MLZ.rst deleted file mode 100644 index a81d91d078fd..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34306_LoadSANS1MLZ.rst +++ /dev/null @@ -1 +0,0 @@ -- The `LoadSANS1MLZ `_ algorithm now can be used to load raw files with extension ``.001`` generated by the SANS-1 instrument at MLZ, as well as to load reduced files with extension ``.002``. diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34447.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34447.rst deleted file mode 100644 index 7ae494ecc67f..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34447.rst +++ /dev/null @@ -1,2 +0,0 @@ -- To allow files saved with :ref:`SaveAscii2 ` to be reloaded into Mantid and preserve rebinning behaviour, a ``Distribution=true`` flag is now written in the file header if the workspace is a Distribution. In this case, a column header is always written, even if the Save property ``ColumnHeader`` is set to false. -- To load an Ascii file, that was saved without a Distribution header flag, and set it as a Distribution, execute :ref:`LoadAscii2 ` with property ``ForceDistributionTrue=true`` diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34705_AddBeamProfileToDiscus.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34705_AddBeamProfileToDiscus.rst deleted file mode 100644 index 0eb0e7888517..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34705_AddBeamProfileToDiscus.rst +++ /dev/null @@ -1 +0,0 @@ -- Add support for a beam profile (specified in :ref:`SetBeam `) to :ref:`DiscusMultipleScatteringCorrection ` \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34765.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34765.rst deleted file mode 100644 index e4d3ccacf0fc..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34765.rst +++ /dev/null @@ -1 +0,0 @@ -- remove the MuscatData, MuscatFunc and MuscatSofQW algorithms. The functionality provided by these algorithms is now provided by the :ref:`DiscusMultipleScatteringCorrection ` algorithm \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34783.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34783.rst deleted file mode 100644 index aa505590892a..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34783.rst +++ /dev/null @@ -1 +0,0 @@ -- Add error calculation to :ref:`DiscusMultipleScatteringCorrection ` following similar approach to :ref:`algm-MonteCarloAbsorption` \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34818.rst b/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34818.rst deleted file mode 100644 index 2da0f523e8b4..000000000000 --- a/docs/source/release/v6.6.0/Framework/Algorithms/New_features/Used/34818.rst +++ /dev/null @@ -1 +0,0 @@ -- Added support for removal of instrument information from workspace - see :ref:`RemoveInstrumentGeometry `. This will allow saving smaller nexus files. diff --git a/docs/source/release/v6.6.0/Framework/Data_Objects/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Framework/Data_Objects/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Data_Objects/Bugfixes/Used/34864.rst b/docs/source/release/v6.6.0/Framework/Data_Objects/Bugfixes/Used/34864.rst deleted file mode 100644 index fac2594a2f7f..000000000000 --- a/docs/source/release/v6.6.0/Framework/Data_Objects/Bugfixes/Used/34864.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a minor bug in LoadNXSPE that caused an invalid value for PSI when the corresponding entry in the NXSPE file is empty \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Data_Objects/New_features/.gitkeep b/docs/source/release/v6.6.0/Framework/Data_Objects/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Fit_Functions/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Framework/Fit_Functions/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Fit_Functions/New_features/.gitkeep b/docs/source/release/v6.6.0/Framework/Fit_Functions/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/New_features/.gitkeep b/docs/source/release/v6.6.0/Framework/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/New_features/Used/34411_HandleCoshOverflowInDifferentWay.rst b/docs/source/release/v6.6.0/Framework/New_features/Used/34411_HandleCoshOverflowInDifferentWay.rst deleted file mode 100644 index 20f86a464eb5..000000000000 --- a/docs/source/release/v6.6.0/Framework/New_features/Used/34411_HandleCoshOverflowInDifferentWay.rst +++ /dev/null @@ -1 +0,0 @@ -- the approach for inverting large tridiagonal matrices has been improved so that the analytical method can still be used even for large matrices, resulting in a performance improvement. This type of matrix inversion is used when calculating the interpolation errors when performing spline interpolation \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/New_features/Used/34806.rst b/docs/source/release/v6.6.0/Framework/New_features/Used/34806.rst deleted file mode 100644 index d23149950150..000000000000 --- a/docs/source/release/v6.6.0/Framework/New_features/Used/34806.rst +++ /dev/null @@ -1 +0,0 @@ -- HDF5 has been upgraded to v1.12 along with h5py to version 3. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Framework/Python/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Framework/Python/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Python/New_features/.gitkeep b/docs/source/release/v6.6.0/Framework/Python/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Framework/Python/New_features/Used/34406.rst b/docs/source/release/v6.6.0/Framework/Python/New_features/Used/34406.rst deleted file mode 100644 index c7a5d50824a5..000000000000 --- a/docs/source/release/v6.6.0/Framework/Python/New_features/Used/34406.rst +++ /dev/null @@ -1,2 +0,0 @@ -- MantidPython and MantidNotebook have been removed. For help accessing the mantid algorithms and methods - in python and jupyter notebooks, check out the instructions in :ref:`PythonNotebook`. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Indirect/Algorithms/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Indirect/Algorithms/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Indirect/Algorithms/Bugfixes/Used/35086_FixIndirectSparseLogic.rst b/docs/source/release/v6.6.0/Indirect/Algorithms/Bugfixes/Used/35086_FixIndirectSparseLogic.rst deleted file mode 100644 index df4565c1d09a..000000000000 --- a/docs/source/release/v6.6.0/Indirect/Algorithms/Bugfixes/Used/35086_FixIndirectSparseLogic.rst +++ /dev/null @@ -1 +0,0 @@ -- a problem has been fixed running :ref:`MonteCarloAbsorption ` on an indirect instrument using the Sparse Instrument feature. Detectors that are associated with an inactive analyser in the instrument definition no longer cause an error about retrieving the efixed value \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Indirect/Algorithms/New_features/.gitkeep b/docs/source/release/v6.6.0/Indirect/Algorithms/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Indirect/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Indirect/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Indirect/New_features/.gitkeep b/docs/source/release/v6.6.0/Indirect/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Indirect/New_features/Used/33676.rst b/docs/source/release/v6.6.0/Indirect/New_features/Used/33676.rst deleted file mode 100644 index 616632329e14..000000000000 --- a/docs/source/release/v6.6.0/Indirect/New_features/Used/33676.rst +++ /dev/null @@ -1 +0,0 @@ -- A new interface has been created: the Indirect Data Manipulation Interface, from the Indirect Data Analysis interface the Sqw, Moments, and Symmetrise tabs have been moved into the new interface along with Elwin and Iqt from the Indirect Data Analysis interface. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Indirect/New_features/Used/34555.rst b/docs/source/release/v6.6.0/Indirect/New_features/Used/34555.rst deleted file mode 100644 index 8b711f216fe0..000000000000 --- a/docs/source/release/v6.6.0/Indirect/New_features/Used/34555.rst +++ /dev/null @@ -1 +0,0 @@ -- Loads data from the beam monitor and adds missing environment parameters, reactor power and scan period to the log when loading EMU event files using :ref:`LoadEMU `. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Indirect/New_features/Used/34636.rst b/docs/source/release/v6.6.0/Indirect/New_features/Used/34636.rst deleted file mode 100644 index 7db946622ea2..000000000000 --- a/docs/source/release/v6.6.0/Indirect/New_features/Used/34636.rst +++ /dev/null @@ -1 +0,0 @@ -- Change "Group by sample" option to "Sample changer grouped" in ISIS Energy Transfer interface and only show it when IRIS instrument is selected. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Indirect/New_features/Used/34882.rst b/docs/source/release/v6.6.0/Indirect/New_features/Used/34882.rst deleted file mode 100644 index 3cd15e49cc14..000000000000 --- a/docs/source/release/v6.6.0/Indirect/New_features/Used/34882.rst +++ /dev/null @@ -1 +0,0 @@ -- Add support for sparse workspace features in the indirect correction interface \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Muon/ALC/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/ALC/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Muon/Algorithms/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/Algorithms/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Muon/Algorithms/New_features/Used/35141.rst b/docs/source/release/v6.6.0/Muon/Algorithms/New_features/Used/35141.rst deleted file mode 100644 index 0dfd087aca94..000000000000 --- a/docs/source/release/v6.6.0/Muon/Algorithms/New_features/Used/35141.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`LoadMuonNexusV2 ` can now accept the `.nxs_v1` extension. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Muon/Elemental_Analysis/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/Elemental_Analysis/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Muon/FDA/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/FDA/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35125.rst b/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35125.rst deleted file mode 100644 index 93d6cc1e3a74..000000000000 --- a/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35125.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug that prevented non-consecutive co-added runs from being completed. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35153.rst b/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35153.rst deleted file mode 100644 index 853e81a02110..000000000000 --- a/docs/source/release/v6.6.0/Muon/MA_FDA/Bugfixes/Used/35153.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug that caused a crash when using a trailing `,` or `-` and then a space. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Muon/MA_FDA/New_features/Used/35141.rst b/docs/source/release/v6.6.0/Muon/MA_FDA/New_features/Used/35141.rst deleted file mode 100644 index 01f6f3bdbf95..000000000000 --- a/docs/source/release/v6.6.0/Muon/MA_FDA/New_features/Used/35141.rst +++ /dev/null @@ -1 +0,0 @@ -- The Muon Analysis and Frequency Domain Analysis GUI's can now accept the `.nxs_v1` extension. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Muon/Muon_Analysis/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Muon/Muon_Analysis/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/33583.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/33583.rst deleted file mode 100644 index e0b559c81180..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/33583.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`ReflectometryILLSumForeground ` now properly sums the foreground of the direct beam over the same range as the reflected beam, which fixes observed issues with reflectivity calculation. diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34470.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34470.rst deleted file mode 100644 index c4963929bc16..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34470.rst +++ /dev/null @@ -1 +0,0 @@ -- Stop using the value of the ScaleRHSWorkspace parameter of Stitch1DMany in favour of the IndexOfReference parameter. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34574.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34574.rst deleted file mode 100644 index 9079c9efbc35..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34574.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix a bug where the live data monitor would stop running when it encounters a transmission run. This was because the reduction would fail when the angle is zero. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34575.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34575.rst deleted file mode 100644 index 791365b40482..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34575.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed an issue where the live data output would update during processing of a new chunk of live data; it now only updates with the final IvsQ result, avoiding the axes changing during processing. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34915.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34915.rst deleted file mode 100644 index ee6b9f537c55..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34915.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed an issue where adding a new batch for instruments other than INTER causes settings on any existing batch tabs to be cleared. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34919.rst b/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34919.rst deleted file mode 100644 index c0920093ad0a..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/Bugfixes/Used/34919.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed an issue where Mantid could crash when workspaces were cleared from the ADS after deleting a batch from the ISIS Reflectometry GUI. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/.gitkeep b/docs/source/release/v6.6.0/Reflectometry/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33468.rst b/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33468.rst deleted file mode 100644 index dc787b5b2f3b..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33468.rst +++ /dev/null @@ -1 +0,0 @@ -- It is now possible to save the content of the ``Search Runs`` table into a ``.csv`` file, allowing the table to be used as a logbook. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33583.rst b/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33583.rst deleted file mode 100644 index ad848ac7f113..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/33583.rst +++ /dev/null @@ -1,5 +0,0 @@ -- :ref:`LoadILLReflectometry ` can now load NeXus files v3 from D17 and FIGARO measurements from cycle 192 onwards. -- Gravity correction has been implemented for FIGARO data reduction in :ref:`ReflectometryILLPreProcess ` and :ref:`ReflectometryILLConvertToQ `. -- :ref:`ReflectometryILLAutoProcess ` now outputs configuration .out file containing a summary of the performed reduction. -- :ref:`ReflectometryILLAutoProcess ` does not have the `UseManualScaleFactors` boolean property to decide whether to use provided manual scale factors. The redundancy has been removed and now when the factors are provided, they will be used in :ref:`Stitch ` algorithm. -- `default-incident-monitor-spectrum` has been corrected for D17 from 257 to 256, allowing for proper monitor normalisation for data from cycle 211 and beyond. diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34577.rst b/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34577.rst deleted file mode 100644 index 283b981168e5..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34577.rst +++ /dev/null @@ -1 +0,0 @@ -- A new graphical tool has been added to the ISIS Reflectometry interface to allow interactive selection of various regions of interest. It shows an on-the-fly preview showing the effect of the selections on the reduced reflectivity curve. It also adds the ability to select and sum across segments on a 2D detector. See the :ref:`Reduction Preview ` documentation for more detail. diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34744.rst b/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34744.rst deleted file mode 100644 index 8bd1deaa0003..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34744.rst +++ /dev/null @@ -1 +0,0 @@ -- :ref:`ReflectometryISISLoadAndProcess ` can now take a polarization efficiencies workspace to make polarization corrections. This workspace can be set via the ``Polarization Efficiencies`` combo box on the ``Experiment Settings`` tab. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34775.rst b/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34775.rst deleted file mode 100644 index 695ff06f5249..000000000000 --- a/docs/source/release/v6.6.0/Reflectometry/New_features/Used/34775.rst +++ /dev/null @@ -1 +0,0 @@ -- It is now possible to provide a calibration file on the Instrument Settings tab of the ISIS Reflectometry interface. The calibration step will be applied as part of pre-processing when a reduction is run or previewed. See :ref:`ReflectometryISISLoadAndProcess ` for more details. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/SANS/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34120.rst b/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34120.rst deleted file mode 100644 index 40bcddf1e4e5..000000000000 --- a/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34120.rst +++ /dev/null @@ -1 +0,0 @@ -- There can now only be one instance of the GUI open at any time. Selecting the GUI from the ``Interfaces`` menu when there is already one open will now re-show the currently open GUI. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34572.rst b/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34572.rst deleted file mode 100644 index ecef6fafd813..000000000000 --- a/docs/source/release/v6.6.0/SANS/Bugfixes/Used/34572.rst +++ /dev/null @@ -1 +0,0 @@ -- The invalid Log binning option for 2D reductions has been removed. Loading a ``TOML`` user file with this value set will now give a warning. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/New_features/.gitkeep b/docs/source/release/v6.6.0/SANS/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/SANS/New_features/Used/34335.rst b/docs/source/release/v6.6.0/SANS/New_features/Used/34335.rst deleted file mode 100644 index f3936757b501..000000000000 --- a/docs/source/release/v6.6.0/SANS/New_features/Used/34335.rst +++ /dev/null @@ -1 +0,0 @@ -- Multiple wavelength ranges can now be processed in a single call to ``WavRangeReduction``. This is more efficient than calling the function separately for each range. To do this, pass the start/end values as lists, e.g. for ranges "1-2, 3-4, 5-6" pass ``wav_start=[1, 3, 5]`` and ``wav_end=[2, 4, 6]``. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/New_features/Used/34632.rst b/docs/source/release/v6.6.0/SANS/New_features/Used/34632.rst deleted file mode 100644 index e45c8aaa273d..000000000000 --- a/docs/source/release/v6.6.0/SANS/New_features/Used/34632.rst +++ /dev/null @@ -1 +0,0 @@ -- Add an interface for simple reduction and exploration of ILL scan data, especially from D16. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/New_features/Used/34643.rst b/docs/source/release/v6.6.0/SANS/New_features/Used/34643.rst deleted file mode 100644 index 40a31d77f23b..000000000000 --- a/docs/source/release/v6.6.0/SANS/New_features/Used/34643.rst +++ /dev/null @@ -1 +0,0 @@ -- Support loading D16 old scan data in their new format with the entire scan in one file. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/SANS/New_features/Used/34752.rst b/docs/source/release/v6.6.0/SANS/New_features/Used/34752.rst deleted file mode 100644 index f8e805457234..000000000000 --- a/docs/source/release/v6.6.0/SANS/New_features/Used/34752.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix the inverted 2 theta axis of the output for data treated using `SANSILLParameterScan`. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Workbench/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31310.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31310.rst deleted file mode 100644 index 0f8d65876e31..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31310.rst +++ /dev/null @@ -1 +0,0 @@ -- In the fitting widget, if a tie is edited to an invalid value Workbench will display an error and revert the tie to its previous value. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31315.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31315.rst deleted file mode 100644 index cd7853486d7e..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31315.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where the user couldn't reselect a peak in the fitting tool after adding another \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31547.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31547.rst deleted file mode 100644 index 0ef3c00cbe97..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31547.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug where Delta and Elastic function peaks were not connected to the fitting window GUI. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31719.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31719.rst deleted file mode 100644 index 5fdad7c1900d..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/31719.rst +++ /dev/null @@ -1 +0,0 @@ -- When plotting with exported script, the "Show Minor Gridlines" checkbox in the Axes tab will be ticked and fixed toggle grid lines button affecting minor lines. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/32778.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/32778.rst deleted file mode 100644 index ea43dd23ae02..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/32778.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where data from workspaces (i.e the fit parameters) accessed from the Fit Browser could not be copied. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33508.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33508.rst deleted file mode 100644 index 7275bf6dc73d..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33508.rst +++ /dev/null @@ -1 +0,0 @@ -- Grid lines will not turn on unexpectedly when changing axis format in a 3-D plot. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33907.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33907.rst deleted file mode 100644 index 039db593e893..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33907.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug where marker labels became unattached when zooming and panning. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33914.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33914.rst deleted file mode 100644 index 65bdb50f6ac0..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/33914.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where spectra plots with error bars could not have normalisation turned off. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34385.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34385.rst deleted file mode 100644 index 3023935ac94e..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34385.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug where Load and Rebin showed up twice (upper and lower case) in the algorithms tab search. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34386.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34386.rst deleted file mode 100644 index ed25bfba9f3d..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34386.rst +++ /dev/null @@ -1 +0,0 @@ -- When a file with mantid algorithms is loaded, and the user accepts workbench adding the mantid API import line, the new import is always added to the top of the file \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34451.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34451.rst deleted file mode 100644 index 4d7d06d50892..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34451.rst +++ /dev/null @@ -1 +0,0 @@ -- Saving script from history dialog in Linux will be saved with :code:`.py` extension \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34472.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34472.rst deleted file mode 100644 index 1919377e1a35..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34472.rst +++ /dev/null @@ -1 +0,0 @@ -- The tooltips of properties in an algorithm dialog will now provide the full description of a property. diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34545.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34545.rst deleted file mode 100644 index 15cae77e6fb0..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34545.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug in the Mean algorithm where an invalid input workspace name would cause Mantid to crash. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34549.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34549.rst deleted file mode 100644 index a166e08c2ec3..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34549.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where collapsing plots using a splitter handle could result in a crash. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34553.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34553.rst deleted file mode 100644 index ee253a9da896..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34553.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug with AddSampleLogMultiple where including log types and keeping the parser box ticked would crash Mantid. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34597.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34597.rst deleted file mode 100644 index d3db25d63456..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34597.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where property values were shortened in history diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34609.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34609.rst deleted file mode 100644 index 47e7d413eb40..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34609.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where waterfall plots were updated unconditionally during ADS updates diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34738.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34738.rst deleted file mode 100644 index 9b164e41d70c..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34738.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed links to tutorials on the About widget. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34782.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34782.rst deleted file mode 100644 index d148d072ae42..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34782.rst +++ /dev/null @@ -1 +0,0 @@ -- The sensitivity of vertial and horizontal lines on plots, including the peak picker and range selector tools, has been increased. diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34870.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34870.rst deleted file mode 100644 index 0f22f022f5df..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34870.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug that prevented arrays from displaying properly in sample logs diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34876.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34876.rst deleted file mode 100644 index e09108d94f44..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/34876.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where the superplot plot area shrunk on some data diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35060.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35060.rst deleted file mode 100644 index aaf9544a9865..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35060.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix inconsistent text size when opening multiple script editor tabs on macOS diff --git a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35100.rst b/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35100.rst deleted file mode 100644 index d2d14f976171..000000000000 --- a/docs/source/release/v6.6.0/Workbench/Bugfixes/Used/35100.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where the user could drag the width handles of an unselected peak in the fit browser. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34782.rst b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34782.rst deleted file mode 100644 index 67055e7d49a3..000000000000 --- a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34782.rst +++ /dev/null @@ -1 +0,0 @@ -- The sensitivity of resizing a masked shape using its corners has been increased for screens with larger resolutions. diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34816.rst b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34816.rst deleted file mode 100644 index b9b22c67632a..000000000000 --- a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/Bugfixes/Used/34816.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug where Y histogram data was not being summed correctly when plotting ALF data on the Pick tab in units of Out of Plane angle. diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/.gitkeep b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/30891.rst b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/30891.rst deleted file mode 100644 index 72e1abd4bc76..000000000000 --- a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/30891.rst +++ /dev/null @@ -1 +0,0 @@ -- Control points on the shapes drawn using the Pick or Draw tab now give cursor feedback. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34469 Option to Highlight Zero Count Detectors.rst b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34469 Option to Highlight Zero Count Detectors.rst deleted file mode 100644 index 66a6bfc7ab30..000000000000 --- a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34469 Option to Highlight Zero Count Detectors.rst +++ /dev/null @@ -1 +0,0 @@ -- Add option to Instrument Viewer display settings to highlight detectors with zero counts \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34625.rst b/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34625.rst deleted file mode 100644 index 8207cf9f6400..000000000000 --- a/docs/source/release/v6.6.0/Workbench/InstrumentViewer/New_features/Used/34625.rst +++ /dev/null @@ -1 +0,0 @@ -- Added the 'Keep original workspace' rebin option on the 'Pick' tab. This will ensure the originally loaded data is rebinned when ticked and not the previously rebinned data. diff --git a/docs/source/release/v6.6.0/Workbench/New_features/.gitkeep b/docs/source/release/v6.6.0/Workbench/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/30402.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/30402.rst deleted file mode 100644 index 8745343d5bed..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/30402.rst +++ /dev/null @@ -1 +0,0 @@ -- In the error reporter, a label showing the maximum character limit of the additional context text has been added. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/31319.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/31319.rst deleted file mode 100644 index 934cf42251f3..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/31319.rst +++ /dev/null @@ -1 +0,0 @@ -- Mouse cursor now changes to a horizontal double arrow when hovering over peak and range markers in the fitting tool, indicating they can be dragged left and right. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34050.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34050.rst deleted file mode 100644 index 321110648ac6..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34050.rst +++ /dev/null @@ -1 +0,0 @@ -- Added button to figure tool bar which hides the figure (unhidden using the plots tab). \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34428.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34428.rst deleted file mode 100644 index 34918547d994..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34428.rst +++ /dev/null @@ -1 +0,0 @@ -- Scripts generated by the Algorithm History Interface now include an import of ``mantid.simpleapi``. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34448.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34448.rst deleted file mode 100644 index 696d67a8e2d9..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34448.rst +++ /dev/null @@ -1 +0,0 @@ -- Normalisation (by maximum value) is available in Superplot diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34457.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34457.rst deleted file mode 100644 index 7131c03b3e01..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34457.rst +++ /dev/null @@ -1 +0,0 @@ -- Subsampling of data on surface plots is now only performed if the number of rows or columns is greater than 100 (instead of 50) \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34563.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34563.rst deleted file mode 100644 index f6b791b7f408..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34563.rst +++ /dev/null @@ -1 +0,0 @@ -- Sample shapes can now be plotted by right-clicking the workspace and selecting ``Show Sample Shape``. This will plot all Sample, Container and Component shapes attached to the workspace, add a black arrow for the beam direction and colored arrows for the lattice vectors. For more details see :ref:`Mesh_Plots`. diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34774.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34774.rst deleted file mode 100644 index 0df0a99e0b28..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34774.rst +++ /dev/null @@ -1 +0,0 @@ -- Mantid Workbench is now compatible with matplotlib v3.6 \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34808.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34808.rst deleted file mode 100644 index e015e07f8a7b..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34808.rst +++ /dev/null @@ -1 +0,0 @@ -- Qt has been upgraded to version 5.15. diff --git a/docs/source/release/v6.6.0/Workbench/New_features/Used/34847.rst b/docs/source/release/v6.6.0/Workbench/New_features/Used/34847.rst deleted file mode 100644 index ecc5f8f61bf1..000000000000 --- a/docs/source/release/v6.6.0/Workbench/New_features/Used/34847.rst +++ /dev/null @@ -1 +0,0 @@ -- Drop support for ICAT v3 diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/.gitkeep b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32292.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32292.rst deleted file mode 100644 index b807a73522e4..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32292.rst +++ /dev/null @@ -1 +0,0 @@ -- Slice viewer now displays '-' instead of ``-DBL_MAX`` in some energy transfer readings. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32358.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32358.rst deleted file mode 100644 index 4c5b2c71d4e5..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/32358.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed bug where the SliceViewer plot would would resize by small amounts as the cursor info changed. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34648.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34648.rst deleted file mode 100644 index a564d960f3b1..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34648.rst +++ /dev/null @@ -1 +0,0 @@ -- Fixed a bug in sliceviewer where a matplotlib deprecation warning appears when toggling on the nonorthogonal axes. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34722.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34722.rst deleted file mode 100644 index be8034922376..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/34722.rst +++ /dev/null @@ -1 +0,0 @@ -- Fix bug in sliceviewer where the line plots produced by the ROI tool were not updated if the cursor was released outside the axes. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/35069.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/35069.rst deleted file mode 100644 index ca40bf6a7d21..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/Bugfixes/Used/35069.rst +++ /dev/null @@ -1 +0,0 @@ -* Fix bug causing cut representation to be re-drawn on the sliceviewer colorfill plot on changing viewing axes when non-axis aligned cutting tool was not enabled. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/.gitkeep b/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/.gitkeep deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/32119.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/32119.rst deleted file mode 100644 index 167245032da5..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/32119.rst +++ /dev/null @@ -1 +0,0 @@ -- Added 'Concise View' check box to the Slice Viewer Peak View to show a reduced number of columns in the peak table view. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34608.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34608.rst deleted file mode 100644 index a7326fe9ebb1..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34608.rst +++ /dev/null @@ -1 +0,0 @@ -- Users can now double click on the SliceViewer plot axis to edit their limits more accurately. \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34645.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34645.rst deleted file mode 100644 index 4bf87b7a63aa..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34645.rst +++ /dev/null @@ -1 +0,0 @@ -- add HKL values to the image info table in the slice viewer when viewing a workspace with HKL coordinates \ No newline at end of file diff --git a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34717.rst b/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34717.rst deleted file mode 100644 index 6f3b9c794497..000000000000 --- a/docs/source/release/v6.6.0/Workbench/SliceViewer/New_features/Used/34717.rst +++ /dev/null @@ -1 +0,0 @@ -- Enable the cut viewer tool in non-orthogonal view \ No newline at end of file