Skip to content

Latest commit

 

History

History
104 lines (93 loc) · 4.83 KB

README.md

File metadata and controls

104 lines (93 loc) · 4.83 KB
Raw

HP Elitebook 850 G2 Hackintosh (Broadwell - 5th Gen.)

Screenshot

Information

  • System: MacOS Monterey 12.x
  • SMBIOS: MacBookAir7,2
  • Bootloader: OpenCore 0.8.8
  • ToDo: Fix all In Progress Stuff | Upgrade to MacOS Ventura 13.x
  • NVRAM Reset after Install recommended
  • Status: WIP/90% Done
  • Every Star Symbol has a extra Note in the Section

Hardware

  • Processor: Intel Core i7 5500U @2,4Ghz, Turbo@3,0Ghz, TDP: 15W
  • iGPU: Intel HD Graphics 5500
  • dGPU: AMD Radeon R7 M260X - 1GB Shared Memory GDDR5
  • Display: FullHD 1920x1080
  • RAM: 2x8GB DDR3L DualChannel SDRAM - 16GB in Total
  • Audio: Realtek ALC280
  • Ethernet: Intel I218LM Gigabit Networkadaptor
  • WiFi & Bluetooth: Intel Dualband Wireless AC7265 B/G/N 2,4/5Ghz
  • Trackpad: MultiTouch Synaptics
  • Keyboard: HP OEM Keyboard with White Backlight
  • SDCard Reader: Realtek RTS5227
  • Webcam: HP HD Camera
  • Fingerprint Sensor: Synaptics (PID003f)
  • Mobile Network: HP-ltxxx LTE/3G/2G Module
  • USB: 5x 3.0
  • Misc: Wireless Buttons/FN Keys Functions

Requirements

  • min. 16GB USB Drive
  • Network Connection
  • Brain.exe

Installation

  1. Prepare your UEFI

    • Load Default Settings
    • Disable VT-d (already Disabled via OpenCore Config (DisableIOMapper))
    • Enable VT-x
    • Disable Fastboot
    • Disable SecureBoot
    • Enable XHCI USB
    • SATA Mode: AHCI
    • DVMT Pre-Allocated Memory set to 64MB or Higher

  2. Download MacOS Monterey from AppStore

  3. Prepare your USB Stick

    • Format via Disk Utility your USB-Drive in GUID and MacOS(HFS)
    • Run Terminal and enter following code to Create the Installer Medium: sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/yourusbname | Replace yourusbname with your created USB Drive Name

  4. run via Terminal: sudo diskutil list then find your USB Device e.g. disk0sX (u must have 2 Partitions e.g. EFI and Install Monterey) Pick the EFI and run sudo diskutil mount diskXsX. Now u have mounted your EFI Partition.

  5. Copy the EFI Folder to the USB Drive. The Structure must be: /drive/EFI/EFI/OCandBOOT/

  6. Reboot your PC and Boot from it via F9 Key!

  7. When the Installer is Booted, Goto Disk Utility > Show All Volumes > Erase your Disk as APFS and GUID

  8. The System will several restarts. Keep in mind, u need every Reboot Press F9 to boot from USB or set as Default Boot Option in UEFI

  9. Finish Setup Assistent

  10. Copy EFI to Main Partition(proceed like in Step 4.)

  11. Congrulations, ur Hackintosh is Ready!

Downloads

Working

  • Boot
  • Audio (Speaker,Mic,Combo Jack)
  • iGPU QI/CI
  • Display & Brightness Control
  • WiFi & Bluetooth (not the best Speed - 30/40MB/s, if u dont care about Speed then its fine else if not - Replace with a Compatible Broadcom/Atheros WiFi Card)
  • Ethernet
  • 4G Modem/Module (SIM not tested but detected by MacOS)
  • FN-Keys Function e.g. Brightness,Audio,...
  • Wireless/Mute Button
  • Touchpad(all Trackpad functions e.g. Gestures) & Keyboard
  • Battery (Detected,Shows information, Plugin Charger only)*
  • All USB Ports (EHCI(2.0),XHCI(3.0))
  • Realtek SDCard Reader (Shown as Internal SDReader, not tested - no SDCard for it!)
  • SATA Controller
  • Memory DIMM Bank1/Bank2 Informations
  • Webcam
  • RTC/CMOS
  • Power Managment** IntelPowerGadget Screenshot
  • Restart/Shutdown***
  • Fan+AutoControl (OpenCore Driver: HPFanReset.efi)
  • NVRAM
  • SLEEP (Wake not)

*= If u want actually run in Battery Mode, reboot your Machine, unplug Charger. Plugin Charger while running System Works.

**= Without these File u running probably in HighPerf Mode. My HP cant use fine tuned Power Powermanagment due to issues with Balanced Mode, my HP Likes only High Perf. Mode. So without the SSDT, the High Perf. Mode is always active. The SSDT need into the Folder: /EFI/EFI/OC/ACPI/ and edit the config.plist with an Plist Editor e.g. ProperTree (See Downloads) and add them there.

***= After a NVRAM Reset u need perform a Restart, to get CMOS State Fixed + Restart/Shutdown (after u get first Shutdown worked, its all fine. Hope we will find a Fix to get from Beginning working, restart seems working all time.)

Not Working

  • dGPU (Not Compatible with MacOS), Disabled via boot-arg -wegnoegpu
  • Fingerprint Reader (will never Works in MacOS)

In Progress (WIP)

  • Wake (Reboot the Machine on Wake)
  • Close/open lid cause blackscreen and need Force Power off
  • Unplug Charger reboot the Machine