Skip to content

Latest commit

 

History

History
10 lines (7 loc) · 950 Bytes

BUILD.md

File metadata and controls

10 lines (7 loc) · 950 Bytes
Raw

Build Instruction

This is not a complete guide, its WIP. I am giving important pointers for it right now.

  • Diode direction, diodes are polarised, and will connect only one way for proper fuctioning. Both SMD and THT have line on them to signify the Cathod side of the diode. The leg/side with line will go towards the Square hole side of diode pads. This is illustrated in the photo below. Diode line should face the Square hole Diode line should face the Square hole

  • ProMicro Allightment in done based on TX0 pin, the TX0 pin should go into the square hole on the promicro holes. The promicr TX pin should be aligned with Square hole on pcb.