From b65c518f97085a0119c0c51d989fecd7bdd9d124 Mon Sep 17 00:00:00 2001 From: Florian Strankowski Date: Sat, 15 Jun 2024 02:29:45 +0200 Subject: [PATCH] Adding network ethernet port speed configuration --- _ont/ont-sercomm-fg1000b-11.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/_ont/ont-sercomm-fg1000b-11.md b/_ont/ont-sercomm-fg1000b-11.md index c69ff695..b5db0fb4 100644 --- a/_ont/ont-sercomm-fg1000b-11.md +++ b/_ont/ont-sercomm-fg1000b-11.md @@ -176,6 +176,13 @@ or ## Getting/Setting Speed LAN Mode +This has been tested on the Telekom Germany Model of the FG1000B.11 and has brought the desired success of increasing +the pre-configured ethernet port speed (1G) to auto-negotiated 2.5G. This does not survive a reboot though. + +``` +/bin/ethctl eth0 media-type auto +``` + # GPON/OMCI settings Part of GPON config is done via the misc configuration loaded as first lib by the smd binary, the config can be seen here: