polybar.ini

[colors]
;background = ${xrdb:color0:#222}
background = #282c34
background-alt = #222
;foreground = ${xrdb:color7:#222}
foreground = #dfdfdf
foreground-alt = #555
primary = #ffb52a
secondary = #e60053
alert = #bd2c40

black        = #282c34
light-red    = #e06c75
dark-red     = #be5046
green        = #98c379
light-yellow = #e5c07b
dark-yellow  = #d19a66
blue         = #61afef
magenta      = #c678dd
cyan         = #56b6c2
grey  = #4b5263

[bar/top]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR:}

; Use the specified monitor as a fallback if the main one is not found.
; monitor-fallback =

; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
; monitor-strict = false

; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
; override-redirect = false

bottom = false

; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true

; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 40

; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
; offset-x = 0
; offset-y = 0

background = ${colors.background}
foreground = ${colors.foreground}

; Background gradient (vertical steps)
;   background-[0-9]+ = #aarrggbb
; background-0 =

; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded. For this to work you may also need to enable
; pseudo-transparency or use a compositor like compton.
; Individual top/bottom values can be defined using:
;   radius-{top,bottom}
radius = 0.0

; Under-/overline pixel size and argb color
; Individual values can be defined using:
;   {overline,underline}-size
;   {overline,underline}-color
line-size = 2
line-color = ${bar/bottom.background}

spacing = 2
module-margin = 1

font-0 = Hack Nerd Font:size=16;0

modules-left = powermenu
modules-center = xwindow
modules-right = network-wired network-wireless utcdate estdate date

[bar/bottom]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor = ${env:MONITOR:}

; Use the specified monitor as a fallback if the main one is not found.
; monitor-fallback =

; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
; monitor-strict = false

; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
; override-redirect = false

bottom = true

; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true

; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 40

; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction
; of 50% minus 10 pixels
; offset-x = 0
; offset-y = 0

background = ${colors.background}
foreground = ${colors.foreground}

; Background gradient (vertical steps)
;   background-[0-9]+ = #aarrggbb
; background-0 =

; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border
; doesn't get rounded. For this to work you may also need to enable
; pseudo-transparency or use a compositor like compton.
; Individual top/bottom values can be defined using:
;   radius-{top,bottom}
radius = 0.0

; Under-/overline pixel size and argb color
; Individual values can be defined using:
;   {overline,underline}-size
;   {overline,underline}-color
line-size = 2
line-color = #f00

border-size = 4
border-color = #00000000

padding-left = 0
padding-right = 2

module-margin-left = 1
module-margin-right = 2

font-0 = Hack Nerd Font:pixelsize=16;1
font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
font-2 = siji:pixelsize=10;1

modules-left = i3
modules-center =
modules-right = filesystem pulseaudio xbacklight memory cpu temperature battery

tray-position = right
tray-padding = 0
tray-maxsize = 24
;tray-background = #0063ff

wm-restack = i3

scroll-up = i3wm-wsnext
scroll-down = i3wm-wsprev

cursor-click = pointer
cursor-scroll = ns-resize

[module/xwindow]
type = internal/xwindow
label = %title:0:200:...%

[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock

format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-prefix-underline = ${colors.secondary}

label-layout = %layout%
label-layout-underline = ${colors.secondary}

label-indicator-padding = 2
label-indicator-margin = 1
label-indicator-background = ${colors.secondary}
label-indicator-underline = ${colors.secondary}

[module/filesystem]
type = internal/fs
interval = 25

mount-0 = /

label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
label-unmounted = %mountpoint% not mounted
label-unmounted-foreground = ${colors.foreground-alt}

[module/i3]
type = internal/i3
format = <label-state> <label-mode>
index-sort = true
wrapping-scroll = false

; Only show workspaces on the same output as the bar
pin-workspaces = true

label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.cyan}

; focused = Active workspace on focused monitor
label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline = ${colors.blue}
label-focused-padding = 1

; unfocused = Inactive workspace on any monitor
label-unfocused = %index%
label-unfocused-padding = 1

; visible = Active workspace on unfocused monitor
label-visible = %index%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}

; urgent = Workspace with urgency hint set
label-urgent = %index%
label-urgent-background = ${colors.alert}
label-urgent-padding = 2

; Separator in between workspaces
; label-separator = |


[module/mpd]
type = internal/mpd
format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>

icon-prev = 
icon-stop = 
icon-play = 
icon-pause = 
icon-next = 

label-song-maxlen = 25
label-song-ellipsis = true

[module/xbacklight]
type = internal/xbacklight

format = <label> <bar>
label = BK

bar-width = 10
bar-indicator = |
bar-indicator-foreground = #fff
bar-indicator-font = 2
bar-fill = ─
bar-fill-font = 2
bar-fill-foreground = #9f78e1
bar-empty = ─
bar-empty-font = 2
bar-empty-foreground = ${colors.foreground-alt}

[module/backlight-acpi]
inherit = module/xbacklight
type = internal/backlight
card = intel_backlight

[module/cpu]
type = internal/cpu
interval = 2
format-prefix = "CPU "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #f90000
label = %percentage:2%%

[module/memory]
type = internal/memory
interval = 2
format-prefix = "RAM "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = ${colors.cyan}
label = %percentage_used%%

[module/network-wired]
type = internal/network
interface = eno1
interval = 3.0

format-connected = <label-connected>
label-connected = %local_ip% | %upspeed% | %downspeed%

format-disconnected = <label-disconnected>
label-disconnected = %ifname% not connected

[module/network-wireless]
type = internal/network
interface = wlp2s0
interval = 3.0

format-connected = <ramp-signal> <label-connected>
label-connected = %essid% | %local_ip% | %upspeed% | %downspeed%

format-disconnected = <label-disconnected>
label-disconnected = %ifname% not connected

ramp-signal-0 = |
ramp-signal-0-foreground = ${colors.light-red}
ramp-signal-1 = ||
ramp-signal-1-foreground = ${colors.light-yellow}
ramp-signal-2 = |||
ramp-signal-2-foreground = ${colors.green}
ramp-signal-3 = ||||
ramp-signal-3-foreground = ${colors.green}
ramp-signal-4 = 直
ramp-signal-foreground = ${colors.foreground-alt}

[module/utcdate]
type = custom/script
exec = TZ=UTC date +"%H:%M:%SZ"
interval = 1
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-overline = #0a6cf5
format-padding = 1

[module/estdate]
type = custom/script
exec = TZ='America/New_York' date +"%H:%M:%SZ"
interval = 1
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-overline = #0a6cf5
format-padding = 1

[module/date]
type = internal/date
interval = 5

date = " %b %d"
time = %H:%M

; ISO8601
date-alt = " %Y-%m-%d"
time-alt = %H:%M:%S%z

format-prefix = 
format-prefix-foreground = ${colors.foreground-alt}
format-overline = ${colors.magenta}
format-padding = 3

label = %date% %time%

[module/pulseaudio]
type = internal/pulseaudio

format-volume = "%{A1:pavucontrol:}<label-volume> <bar-volume>%{A}"
label-volume = VOL %percentage%%
label-volume-foreground = ${root.foreground}

format-muted-prefix = "ﱝ "
format-muted-foreground = ${colors.foreground-alt}
label-muted = muted

bar-volume-width = 10
bar-volume-foreground-0 = #55aa55
bar-volume-foreground-1 = #55aa55
bar-volume-foreground-2 = #55aa55
bar-volume-foreground-3 = #55aa55
bar-volume-foreground-4 = #55aa55
bar-volume-foreground-5 = #f5a70a
bar-volume-foreground-6 = #ff5555
bar-volume-gradient = false
bar-volume-indicator = |
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${colors.foreground-alt}

[module/battery]
type = internal/battery
battery = BAT0
adapter = AC
full-at = 98
time-format = %H:%M
format-charging = <animation-charging> <label-charging>
format-charging-underline = #ffb52a

format-discharging = <animation-discharging> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}
label-discharging = %percentage%% | %time%

format-full-prefix = " "
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = ${self.format-charging-underline}

ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-foreground = ${colors.foreground-alt}

animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750

animation-discharging-0 = 
animation-discharging-1 = 
animation-discharging-2 = 
animation-discharging-3 = 
animation-discharging-4 = 
animation-discharging-foreground = ${colors.foreground-alt}
animation-discharging-framerate = 750

[module/temperature]
type = internal/temperature
thermal-zone = 0
warn-temperature = 60

format = <ramp> <label>
format-underline = #f50a4d
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}

label = %temperature-c%
label-warn = %temperature-c%
label-warn-foreground = ${colors.secondary}

ramp-0 = 
ramp-1 = 
ramp-2 = 
ramp-foreground = ${colors.foreground-alt}

[module/powermenu]
type = custom/menu

expand-right = true
format-spacing = 1
format-padding = 2
format-background = #000

label-open = ⏻
label-close = ﰸ close
label-close-foreground = ${colors.secondary}
label-separator = |
label-separator-foreground = ${colors.foreground-alt}

menu-0-0 = Reboot
menu-0-0-exec = menu-open-1
menu-0-1 = Suspend
menu-0-1-exec = menu-open-2
menu-0-2 = Shutdown
menu-0-2-exec = menu-open-3

menu-1-0 = cancel
menu-1-0-exec = menu-open-0
menu-1-1 = Reboot
menu-1-1-exec = reboot

menu-2-0 = Suspend
menu-2-0-exec = systemctl suspend
menu-2-1 = cancel
menu-2-1-exec = menu-open-0

menu-3-0 = Shutdown
menu-3-0-exec = shutdown now
menu-3-1 = cancel
menu-3-1-exec = menu-open-0


[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
;pseudo-transparency = false

[global/wm]
margin-top = 5
margin-bottom = 5

; vim:ft=dosini