A Java NIO.2 service provider for S3, allowing Java NIO operations to be performed on paths using the s3 scheme. This
package implements the service provider interface (SPI) defined for Java NIO.2 in JDK 1.7 providing "plug-in" non-blocking
access to S3 objects for Java applications using Java NIO.2 for file access. Using this package allows Java applications
to access S3 without having to modify or recompile the application. You also avoid having to set up any kind of FUSE mount.
For a general overview see the AWS Blog Post announcing this package.
There are several ways that this package can be used to provide Java NIO operations on S3 objects:
- Use this libraries jar as one of your applications compile dependencies
- Include the libraries "shadowJar" in your
$JAVA_HOME/jre/lib/ext/directory (not supported for Java 9 and above) - Include this library on your class path at runtime (best option for Java 9 and above)
- Include the library as an extension at runtime
-Djava.ext.dirs=$JAVA_HOME/jre/lib/ext:/path/to/extension/(not supported for Java 9 and above)
Assuming that myExecutableJar is a Java application that has been built to read from java.nio.file.Paths and
this library has been exposed by one of the mechanisms above then S3 URIs may be used to identify inputs. For example:
java -jar myExecutableJar --input s3://some-bucket/input/file
java -jar myExecutableJar --input s3x://my-s3-service:9000/some-bucket/input/file
If this library is exposed as an extension (see above), then no code changes or recompilation of myExecutable are
required.
Several examples are included in the examples module. In most cases it is sufficient to use Java Path objects constructed
with a URI representing s3:// URI. Constructing Paths with Strings (as opposed to URIs) will normally default
to the local filesystems NIO provider rather than this provider so use of URIs should always be preferred over Strings
for all Path objects (even local ones).
With the introduction of modules in Java 9 the extension mechanism was retired. Providers should now be supplied as java modules.
For backward compatibility we have not yet made this change so to ensure that the provider in this package is recognized
by the JVM you need to supply the JAR on your classpath using the -classpath flag. For example to use this provider with org.example.myapp.Main from myApp.jar
you would type the following:
java -classpath build/libs/nio-spi-for-s3-1.1.0-all.jar:myApp.jar org.example.myapp.Main
As a concrete example, using Java 9+ with the popular genomics application GATK, you could do the following:
java -classpath build/libs/nio-spi-for-s3-1.1.0-all.jar:gatk-package-4.2.2.0-local.jar org.broadinstitute.hellbender.Main CountReads -I s3://<some-bucket>/ena/PRJEB3381/ERR194158/ERR194158.hg38.bam
Releases of this library are available from Maven Central and can be added to projects using the standard dependency declarations.
For example:
build.pom
<dependency>
<groupId>software.amazon.nio.s3</groupId>
<artifactId>aws-java-nio-spi-for-s3</artifactId>
<version>2.0.1</version>
</dependency>build.gradle(.kts)
implementation("software.amazon.nio.s3:aws-java-nio-spi-for-s3:2.0.0")The library heavily relies on the crt client from aws. It uses the uber
version for simplicity
and wide range of supported platforms.
Tip
If size is an issue, you can exclude the crt dependency from the library and import the specific crt library
for your platform. For example:
implementation("software.amazon.nio.s3:aws-java-nio-spi-for-s3:2.0.0") {
exclude group: 'software.amazon.awssdk.crt', module: 'aws-crt'
}
implementation 'software.amazon.awssdk.crt:aws-crt:0.29.11:linux-x86_64'
| Library version | Java |
|---|---|
| <= 1.2.1 | >= 8 |
| >= 2.x.x | >= 11 |
Versions 1.2.2 until 2.x.x are compatible with java 8 and above, but will need to exclude logback dependency if using with java 8:
implementation("software.amazon.nio.s3:aws-java-nio-spi-for-s3:1.2.2") {
exclude group: 'ch.qos.logback', module: 'logback-core'
exclude group: 'ch.qos.logback', module: 'logback-classic'
}
implementation("ch.qos.logback:logback-classic:1.3.11") // 1.3.x is still compatible with java 8
implementation("ch.qos.logback:logback-core:1.3.11")This library will perform all actions using credentials according to the AWS SDK for Java default credential provider chain. The library does not allow any library specific configuration of credentials. In essence, you (or the service / Principal using this library) should have, or be able to assume, a role that will allow access to the S3 buckets and objects you want to interact with.
Note, although your IAM role may be sufficient to access the desired objects and buckets you may still be blocked by bucket access control lists and/ or bucket policies.
This NIO provider also supports 3rd party S3-like services. To access a 3rd party service, follow this URI pattern:
s3x://[key:secret@]endpoint[:port]/bucket/objectkey
If no credentials are given the default AWS configuration mechanism will be used as per the section above.
In the case the target service uses HTTP instead of HTTPS (e.g. a testing environment), the protocol to use can be configured through the following environment variable or system property:
export S3_SPI_ENDPOINT_PROTOCOL=http
java -Ds3.spi.endpoint-protocol=http
Access points are named network endpoints that are attached to buckets that you can use to perform S3 object operations.
To perform an operation via an access point using this library you will need to use the access point alias
as the access point arn is not a valid URI and cannot be used to form a Java Path.
- Not all S3 operations are supported when using access links. If you notice a feature of this library that cannot be used via an access point please file an issue with this repository explaining your use case.
- Your actions may be additionally limited by policies present on the access point that are not present on the bucket
Bytes from S3 objects can be read using an S3SeekableByteChannel which is an implementation of java.nio.channel.SeekableByteChannel.
Because S3 is a high-throughput but high-latency (compared to a native filesystem) service the S3SeekableByteChannel
uses an in-memory read-ahead cache of ByteBuffers and is optimized for the scenario where bytes will typically be
read sequentially.
To perform this the S3SeekableByteChannel delegates read operations to an S3ReadAheadByteChannel which
implements java.nio.channels.ReadableByteChannel. When the first read operation is called, the channel will read it's
first fragment and enter that into the buffer, requests for bytes in that fragment are fulfilled from that buffer. When
a buffer fragment is more than half read, all empty fragment slots in the cache will be asynchronously filled. Further,
any cached fragments that precede the fragment currently being read will be invalidated in the cache freeing up space
for additional fragments to be retrieved asynchronously. Once the cache is "warm" the application should not be blocked
on I/O, up to the limits of your network connection.
System configuration parameters can be set as environment variables or java system properties. Therefore these parameters apply to all file systems created with S3 and S3X providers.
If no configuration is supplied the values in resources/s3-nio-spi.properties are used. Currently, 50 fragments of 5MB.
Each fragment is downloaded concurrently on a unique thread.
| parameter | description |
|---|---|
| aws.region | specifies the default region for API calls |
| aws.accessKey | specifies the key id to use for authentication |
| aws.secretAccessKey | specifies the secret to use for authentication |
| s3.spi.read.fragment-number | buffer asynchronously prefetches n sequential fragments from S3 (currently 50) |
| s3.spi.read.fragment-size | size of each fragment (currently 5MB) |
You may use S3_SPI_READ_MAX_FRAGMENT_NUMBER and S3_SPI_READ_MAX_FRAGMENT_SIZE to set the maximum umber of cached
fragments and maximum fragment sizes respectively. For example:
export S3_SPI_READ_MAX_FRAGMENT_SIZE=100000
export S3_SPI_READ_MAX_FRAGMENT_NUMBER=5
java -Djava.ext.dirs=$JAVA_HOME/jre/lib/ext:<location-of-this-spi-jar> -jar <jar-file-to-run>You may use java command line properties to set the values of the maximum fragment size and maximum number of fragments
with s3.spi.read.max-fragment-size and s3.spi.read.max-fragment-number respectively. For example:
java -Djava.ext.dirs=$JAVA_HOME/jre/lib/ext:<location-of-this-spi-jar> -Ds3.spi.read.max-fragment-size=10000 -Ds3.spi.read.max-fragment-number=2 -jar <jar-file-to-run>Configurations use the following order of precedence from highest to lowest:
- Java properties
- Environment variables
- Default values
As each S3SeekableByteChannel can potentially spawn 50 concurrent fragment download threads, you may find you exceed S3
limits, especially when the application using this SPI reads from multiple files at the same time or has multiple threads
each opening its own byte channel. In this situation you should reduce the size of S3_SPI_READ_MAX_FRAGMENT_NUMBER.
In some cases it may also help to increase the value of S3_SPI_READ_MAX_FRAGMENT_SIZE as fewer, large fragments will
reduce the number of requests to the S3 service.
Ensure sufficient memory is available to your JVM if you increase the fragment size or fragment number.
The mode of the channel is controlled with the StandardOpenOptions. To open a channel for write access you need to
supply the option StandardOpenOption.WRITE. All write operations on the channel will be gathered in a temporary file,
which will be uploaded to S3 upon closing the channel.
Be aware, that the current implementation only supports channels to be used either for read or write due to potential consistency issues we may face in some cases. Attempting to open a channel for both read and write will result in an error.
Because we cannot predict the time it would take to write files, there are currently no timeouts configured per
default. However, you may configure timeouts via the S3SeekableByteChannel.
To configure timeouts for writing files or opening files for write access, you may use the Long timeout and
TimeUnit timeUnit parameters of the S3SeekableByteChannel constructor.
new S3SeekableByteChannel(s3Path, s3Client, channelOpenOptions, timeout, timeUnit);
As an object store, S3 is not completely analogous to a traditional file system. Therefore, several opinionated decisions were made to map filesystem concepts to S3 concepts.
An S3 bucket is represented as a java.nio.spi.FileSystem using an S3FileSystem. Although buckets are globally
namespaced they are owned by individual accounts, have their own permissions, regions, and potentially, endpoints.
An application that accesses objects from multiple buckets will generate multiple FileSystem instances.
Objects in S3 are analogous to files in a filesystem and are identified using S3Path instances which can be built
using S3 uris (e.g s3://mybucket/some-object) or, posix patterns /some-object from an S3FileSystem for mybucket
No hidden files
S3 doesn't support hidden files therefore objects in S3 named with a . prefix such as .hidden are not considered hidden
by this library.
Creation time and Last modified time are always identical. S3 objects do not have a creation time, and modification of
an S3 object is actually a re-write of the object so these
are both given the same date (represented as a FileTime). If for some reason a last modified time cannot be determined
the Unix Epoch zero-time is used.
S3 doesn't support symbolic links therefore no S3Path is a symbolic link and any NIO LinkOptions are ignored when resolving
Paths.
Technically, S3 doesn't have directories - there are only buckets and keys. For example, in s3://mybucket/path/to/file/object
the bucket name is mybucket and the key would be /path/to/file/object. By convention, the use of / in a key is
thought of as a path separator. Therefore, object could be inferred to be a file in a directory called /path/to/file/
even though that directory technically doesn't exist. This package will infer directories under what we call "posix-like"
path representations. The logic of these is encoded in the PosixLikePathRepresentation object and described below.
An S3Path is inferred to be a directory if the path ends with /, /. or /.. or contains only . or ...
For example, these paths are inferred to be directories /dir/, /dir/., /dir/... However dir and /dir cannot
be inferred to be a directory.
This is a divergence from a true POSIX filesystem where if /dir/ is a directory then /dir and dir relative
to / must also be a directory. S3 holds no metadata that can be used to make this inference.
As directories don't exist and are only inferred there is no concept of being "in a directory". Therefore, the working
directory is always the root and /object ./object and object can be inferred to be the same file. In addition ../object
will also be the same file as you may not navigate above the root and no error will be produced if you attempt to.
Although there are no working directories, paths may be resolved relative to one another as long as one is a directory.
So if some/path was resolved relative to /this/location/ then the resulting path is /this/location/some/path.
Because directories are inferred, you may not resolve some/path relative to /this/location as the latter cannot be
inferred to be a directory (it lacks a trailing /).
The POSIX path special symbols . and .. are treated as they would be in a normal POSIX path. Note that this could
cause some S3 objects to be effectively invisible to this implementation. For example s3://mybucket/foo/./baa is
an allowed S3 URI that is not equivalent to s3://mybucket/foo/baa even though this library will resolve the path /foo/./baa
to /foo/baa.
The definition of an S3 URI doesn't completely conform to the W3C specification. For example an object in mybucket called
my%object will result in an S3 URI called s3://mybucket/my%object even though the % symbol should be URL encoded.
The Java NIO libraries depend on the use of Java URI objects which are final and which do follow the W3C specification
and therefore must URL encode the URI. This results in a small incompatibility where the above URI cannot be represented
by this library. Whenever possible avoiding the use of special characters in S3 filenames and paths is recommended. Otherwise
cautious use of URL escapes will be needed.
The AWS S3 JDK delete operation doesn't return any indication of whether the file existed before deletion. Although
we could test for file existence before deletion this would require an additional API call and would not be an atomic
operation. Because S3 only guarantees read after write consistency it would be possible for a file to be created or
deleted between these two operations. Therefore, we currently always return true
Our implementation of FileSystemProvider.copy will also copy the content of the directory via batched copy operations. This is a variance
from some other implementations such as UnixFileSystemProvider where directory contents are not copied and the
use of the walkFileTree method is suggested to perform deep copies. In S3 this could result in an explosion
of API calls which would be both expensive in time and possibly money. By performing batch copies we can greatly reduce
the number of calls.
The library uses the gradle build system and targets Java 11 to allow it to be used in many contexts. To build you can simply run:
./gradlew buildThis will run all unit tests and then generate a jar file in libs with the name s3fs-spi-<version>.jar. Note that
although the compiled JAR targets Java 11 a later version of the JDK may be needed to run Gradle itself.
To build a "fat" jar with the required dependencies (including aws s3 client libraries) you can run:
./gradlew shadowJarwhich will produce s3fs-spi-<version>-all.jar. If you are using this library as an extension, this is the recommended
jar to use. Don't put both jars on your classpath or extension path, you will observe class conflicts.
We use JUnit 5, AssertJ and Mockito for unit testing.
When contributing code for bug fixes or feature improvements, matching tests should also be provided. Tests must not rely on specific S3 bucket access or credentials. To this end, S3 clients and other artifacts should be mocked as necessary. Remember, you are testing this library, not the behavior of S3. If you wish to do that you may want to write an integration test.
Run unit tests with ./gradlew test
Integration tests emulate S3 behavior using localstack. Running tests requires a container runtime such as Docker or Podman.
Run integration tests with ./gradlew integrationTest
Produce code coverage reports with ./gradlew testFullCodeCoverageReport
HTML output of the reports can be found at:
| Type | Test Report | Coverage Report |
|---|---|---|
| Unit | build/reports/tests/test/index.html | build/reports/jacoco/testCodeCoverageReport/html/index.html |
| Integration | build/reports/tests/integrationTest/index.html | build/reports/jacoco/integrationTestCodeCoverageReport/html/index.html |
| Full | - | build/reports/jacoco/testFullCodeCoverageReport/html/index.html |
HTML output of the test reports can be found at build/reports/tests/test/index.html and test coverage reports are
found at build/reports/jacoco/test/html/index.html
We encourage community contributions via pull requests. Please refer to our code of conduct and contributing for guidance.
Code must compile to JDK 11 compatible bytecode. Matching unit tests are required for new features and fixes.