diff --git a/docs/images/operacake-block-diagram.png b/docs/images/operacake-block-diagram.png new file mode 100644 index 000000000..4165d33fd Binary files /dev/null and b/docs/images/operacake-block-diagram.png differ diff --git a/docs/images/operacake-block-diagram.svg b/docs/images/operacake-block-diagram.svg new file mode 100644 index 000000000..48b5c3a6f --- /dev/null +++ b/docs/images/operacake-block-diagram.svg @@ -0,0 +1,1664 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + image/svg+xml + + + + + + + + + + + Opera Cake: Block Diagram + + + + + + + + + A0 + + + + + + + + + + + + A1 + + + + + + + + + + + + A2 + + + + + + + + + + + + A3 + + + + + + + + + + + Opera Cake + ExternalSMA-SMACable + + + + + + + + + + + + + + + + + + + + + + + + + + + + GREATSCOTTGADGETS + + + Diagram Revision: A + Hardware Revision: r1 + © Great Scott Gadgets 2024 + + This design may be copied & usedunder the terms of CERN-OHL-P v2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + A4 + U2 + U3 + U1 + U4, U5 + + + + + + + + + + + + + + + I2C + + SCTimer + HackRF One + + + + + + + + + + + Antenna + + + + B0 + + + + + + + + + + + + B1 + + + + + + + + + + + + B2 + + + + + + + + + + + + B3 + + + + + + + + + + + + B4 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/docs/source/opera_cake_hardware.rst b/docs/source/opera_cake_hardware.rst index deba37db2..896e77adb 100644 --- a/docs/source/opera_cake_hardware.rst +++ b/docs/source/opera_cake_hardware.rst @@ -2,6 +2,13 @@ Hardware ======== +Block Diagram +~~~~~~~~~~~~~ + +.. image:: ../images/operacake-block-diagram.png + :alt: Opera Cake Block Diagram + + Banks ~~~~~ @@ -15,4 +22,4 @@ Opera Cake has two primary ports, A0 and B0, each of which can be switched to an LEDs ~~~~ -Port selections are indicated by LEDs next to each port's connector. Port A0 and the secondary port connected to A0 are indicated with a green LED. Port B0 and the secondary port connected to B0 are indicated with a yellow LED. \ No newline at end of file +Port selections are indicated by LEDs next to each port's connector. Port A0 and the secondary port connected to A0 are indicated with a green LED. Port B0 and the secondary port connected to B0 are indicated with a yellow LED.