Which devices would you like to be supported?

[gmallios]

Reply with the device Model ID and the name.

[Maxcension]

Life Q30 (A3028) is working perfectly, but the custom ANC setting and the "vocal mode" in the transparency mode isn't supported by the headset.
Also, we can safely say that the Life Tune (A3029) works as well as it is a Q30 (A3028) with a logo change.
https://fccid.io/2AOKB-A3028/Attestation-Statements/Family-declaration-4855135

[gmallios]

Life Q30 (A3028) is working perfectly, but the custom ANC setting and the "vocal mode" in the transparency mode isn't supported by the headset. Also, we can safely say that the Life Tune (A3029) works as well as it is a Q30 (A3028) with a logo change. https://fccid.io/2AOKB-A3028/Attestation-Statements/Family-declaration-4855135

I will open an issue to track progress for Life Tune/Q30. Also, right now the ANC settings are what Liberty Air 2 Pros support, device-specific profiles are underway. Thanks for you comment!

[adriantoddross]

Would love to see support for Life P3 and the Q45. I think the P3's should take priority since they are one of the top budget earbuds for people that prefer hard-hitting bass.

[adriantoddross]

Would also love how to figure out how to enable low-latency for gaming for applicable earbuds like the P3

[gmallios]

Would love to see support for Life P3 and the Q45. I think the P3's should take priority since they are one of the top budget earbuds for people that prefer hard-hitting bass.

Well, Q30/Q35 uses almosts the same protocol as Liberty Air 2 Pros which I have, that's why they have taken priority.
But, i have reverse-enginnered the P3/Q45 protocol so it should not be that trivial to implement it once the Q30/Q35 get merged to master.

Would also love how to figure out how to enable low-latency for gaming for applicable earbuds like the P3

I will include a toggle in the app for sure. I can also send you the command if you like to experiment with Bluetooth Serial Ports.

[Exxesto]

I have a Life A2 NC and I saw the app is designed for it but will be stuck in a loading screen after I click connect. It will find and connect to the device though! and then be stuck with the circle loading animation. Using a Windows 11 device.

[gmallios]

I have a Life A2 NC and I saw the app is designed for it but will be stuck in a loading screen after I click connect. It will find and connect to the device though! and then be stuck with the circle loading animation. Using a Windows 11 device.

The app currently does not support Life A2 NC as you saw but the protocol is very similar to the Liberty Air 2 Pro. I will be adding support as soon as possible.

[neverknowsless]

hey! thank you for making this, it's so awesome! if you could add support to the Soundcore Q45 whenever you have time that would be great!

[GeneralRIMT]

Would love to see support for the Soundcore VR P10 in the future!

[capz]

Would love to have support for the A3040, SoundCore Space Q45

What does it take to add support? if it's just copying some source and pasting in some ids and feature flags then i'd make a PR for it, but I'm not clear on what it takes to add support. Obviously with a PR i'd be able to test it by myself beforehand as well, which reduces back-end-forth between dev and user :)

[gmallios]

Would love to have support for the A3040, SoundCore Space Q45

What does it take to add support? if it's just copying some source and pasting in some ids and feature flags then i'd make a PR for it, but I'm not clear on what it takes to add support. Obviously with a PR i'd be able to test it by myself beforehand as well, which reduces back-end-forth between dev and user :)

You have to decompile the official app see what commands it sends and how it parses the response. A3040 support is underway and you can find more technical info in soundcore-lib/A3040.md

Edit: I'm not sure on the legality side but I could upload my JADX project which contains decompiled code.

[PikeNote]

Would live to see support for A3936, Soundcore Space A40

I would love to contribute but working with the JADX with obfuscated code is quite the challenge. You probably aren't legally allowed to post the project and they could DMCA it most likely.

Edit: I wonder if Wiresharking the Bluetooth HCI logs would be easier

[gmallios]

Would live to see support for A3936, Soundcore Space A40

I would love to contribute but working with the JADX with obfuscated code is quite the challenge. You probably aren't legally allowed to post the project and they could DMCA it most likely.

Edit: I wonder if Wiresharking the Bluetooth HCI logs would be easier

Wireshark logs will most certainly help to discover which specific command is used for an action with a device but you need to record which action you took for a specific log (change ANC mode, EQ settings etc). I started out with this method but I knew I couldn't add support for other devices without reverse enginneering the app. I will open an issue for A3936 when i have reversed some basic methods. If you have some experience with React you can contribute to the UI side of the app 🙂

Note: A very helpful log is setting the custom EQ values to max->0->low to see if there is DRC support.

[arnasbulut]

I have a Motion+, which is, in my opinion, best device out there under $100. On top of it, it becomes much more powerful with Alan Ross' EQ settings. I'd really love to see this device supported.

[minikold]

Following this project. Just got a new pair of Space One's. Would love for them to be supported. Willing to help in any way!

[AdwaitVaidya]

Just got a pair of Q45. Would love to help in any way!

[Panabou]

It would be great to see the Soundcore Liberty 4 (A3953,A3953L,A3953R) to be supported.

[szapeti]

A3961 - Sport X10 Please

[Aronjlove]

A3961 - Sport X10 Please

Same.

[pyt0xic]

A3948 - A20i Please ❤️

[miguelssimao]

Requesting support for A3004 - Q20i, please

[Vikachubro21]

I can test for A3004 - Q20i, might be able to help with UI. If there's anything relatively simple let me know.

[souhaiebtar]

Requesting support for A3947 - Liberty 4 NC , please

[joaocandre]

Would live to see support for A3936, Soundcore Space A40

Same here. I'm open to contribute in any way I can.

[gmallios]

@souhaiebtar @joaocandre @Vikachubro21 @miguelssimao @szapeti Please try downloading the latest unstable release and before connecting to the device, open right click on the window, press inspect and go to the console tab. After clicking on connect, some logs should appear. Please open a new issue or attach them to an existing.

[gmallios]

Just got a pair of Q45. Would love to help in any way!

Q45 should be working in the latest unstable build although EQ customization is not supported currently but planned.

[joaocandre]

@gmallios will do as soon as I get access to a Windows machine (I've unable to compile in Linux so far)

[souhaiebtar]

@gmallios i uploaded Liberty 4 Nc logs as requested, please let me know if you need more information, if you want a capture for wireshark please let me know, but you may need to help me do it :)

[WhiskeredMaster]

Liberty 4 (A3953), please.

[pgaskin]

For low-latency mode, at least on the P20i, the RFCOMM data is:

• Gaming Mode On: 08ee00000001870b00018a
• Gaming Mode Off: 08ee00000001870b000089

https://gist.github.com/pgaskin/37553eba141c26029e68140ee5215e04

[isimsizadam]

I have an Anker Soundcore Motion 100 (A3133) Bluetooth speaker. There is a button on the device labeled "BASS". This button activates the "Extra Bass" equalizer, which is one of the four default equalizer settings in the device's software. When I press the button again, it reverts to the previous equalizer setting I was using. I would like this button to activate the "Sound" equalizer instead of the "Extra Bass" equalizer. Could you help me with this?

[SABRE1982]

Space One, A3035

[pjsramos]

Hi,
I have an Soundcore Space Q45 headphones and the app work's nice with them.

[Shrewd]

It would be nice to support Space One :)

[rebeltaz]

A3952 : Soundcore Liberty 3 Pro would be awesome.

[onlynoneo]

Space One , please