Changes.md

Changes - Cockos Reaper

24.5.1

• Requires Reaper 7.22+
• New: Session views display now muted clips in gray or black (depending on the color capabilities of the device).
• Fixed: Potential crash when opening the parameter mapping dialog.
• AutoColor
  • Fixed: Could crash on start and shutdown.
• Kontrol Mk2/Mk3
  • New: Added support for Kontakt 8.
  • Fixed: Only show option to select mode-switch button on Mk3 devices.
• LaunchControl XL
  • New: Keep the Device button pressed and use Send Select up/down to switch between either the cursor device, track parameters or project parameters.
• Launchpad
  • New: Press Shift+Session twice to activate the new Scene Play view. In this view each pad represents 1 scene, which means that 64 scenes can be directly triggered.
• MCU
  • Fixed: Switched Shift+Press Knob in Parameter mode for selecting devices to Option+Press Knob to still be able to do fine adjustments with Shift+Knob.

24.5.0

• Requires Reaper 7.22+
• New: Added support for APCmini mk2.
• APCmini mk1
  • New: Added option to toggle 'Notify played chords' on/off.
• Fire
  • Fixed: Drum 64 view: Shifting the notes up/down with select knob did not work.
• Fire, Launchpad, Push
  • Fixed: Drum 64 view: Notes were not in sync with pad colors.
• Push
  • Fixed: Drum XoX view was missing from preferred view selection in settings.

24.4.1

• Requires Reaper 7.22+
• Fixed: DrivenByMoss did crash on startup on some systems.

24.4.0

• Requires Reaper 7.22+
• Reaper specifics
  • New: The horizontal scrolling in the arranger is now adaptive to the zoom factor! Furthermore, in slow-mode (normally if combined with the SHIFT button) snap to grid is ignored.
  • New: Switched to getting available plugins from Reaper API instead of parsing configuration files.
  • New: Several well known plug-ins are now categorized
  • New: A plugin is now automatically selected when selected in Reaper but only if the track is selected (if the track would be auto-selected, it would get stuck and no other track could be selected. I tried it).
  • New: A clip is now indicated as playing when the play cursor is in the range of the region marker with the same index as the clip and playback is active.
  • New: A slot is now indicated as recording when the play cursor is in the range of the region marker with the same index as the slot and the track is armed.
  • New: Updated to JDK 21.
• Fire
  • New: Added setting 'Color all track states (mute, solo, rec arm)' which allows to switch off the colors for the deactivated states in Mix mode.
  • New: Press Alt+Select knob to toggle the on/off state of the current device.
• Generic Flexi
  • New: Added setting for the length of a new clip.
• MCU
  • New: Improved setting of VU clipping state.
• OXI One
  • Fixed: Extension did crash in 24.3 (regression).

24.3.0

• Requires Reaper 6.71+
• Reaper specifics
  • New: Improved logging area. Errors are now printed in red.
  • New: After changing the settings of a controller, only this controller is restarted.
  • New: The controller can now be double clicked to open the setting dialog.
  • New: Switched setting of automation to global automation mode (instead of per track).
  • New: 'Toggle Cue Marker Visibility' triggers now the Reaper action 'Ruler: Display project regions/markers as gridlines in arrange view'.
  • New: 'Toggle Track Height' triggers now the Reaper action 'View: Cycle track zoom between minimum, default, and maximum height (limit to 100%)'.
  • Fixed: The controller specific project settings were not restored when a project was auto-loaded on Reaper startup.
  • Fixed: Fixed some issues related to the controller listbox.
  • Fixed: There were several startup issues when the extension was initiated for the 1st time and the Reaper configuration dialogs were not closed before making changes in the DrivenByMoss window. The user interface is now blocked until the dialogs are closed. Additionally, some measure are now taken to fix broken configuration files.
• All devices
  • New: When scrolling track bank page left the 1st instead of the last track of the new page is selected.
• APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
  • New: Added option to disable showing played chords.
  • New: Renamed setting Default note view to Startup view.
• Fire
  • New: The Shift mode is not activated when ALT is already pressed.
  • Fixed: Slow knob mode got stuck when pressing SHIFT a second time.
• Launchpad
  • New: The bird's eye view in session mode is now closed automatically if the Session button is kept pressed.
  • New: In Project/Track params mode the scene buttons do now select the pages 1-8 (instead of blocks of 8 pages).
  • Fixed: Extension crashed when pressing one of the cursor keys in clip loop edit view.
  • Fixed: Shift mode should not be activated when used in combination with cursor keys in session mode.
• Maschine, OXI One
  • New: Added new setting 'Startup view' which allows to auto-select the preferred view on startup.
• MCU
  • New: Keep the Option button pressed to show the parameter pages of the selected device. Press the respective knob to select the page for editing.
  • New: Device mode shows number of available pages on 2nd display.
• Push 1
  • New: Notification messages which are shorter than 18 characters are now shown in the right upper corner of the display instead of clearing the whole display.

24.2.0

• Requires Reaper 6.71+
• MCU
  • New: Added additional MCU support for Asparion D700 series.
  • New: Track names have a prefix of the send index in Send mode.

24.1.0

• Requires Reaper 6.71+
• APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
  • New: Added new setting 'Turn off scale pads'. If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
  • New: Played chords are displayed in play modes.
• Fire
  • New: The Shift Mode allows to pin the cursor track, cursor device and cursor clip (3 green buttons in the 2nd row from the top).
  • New: The Automation Write Mode can be selected in the Shift Mode (buttons of the 3rd row).
  • New: The initial pad brightness is now set to 20%.
  • New: Switched button combinations for changing the root note and changing the scale layout.
  • New: Toggling clip launcher/arranger automation gives now feedback in the display.
• Generic Flexi
  • New: Functions can now be assigned to 10 different layers. With the 'Function Layers' functions each layer can be temporarily or permanently activated.
  • New: Added functions for Groove: 'Toggle Active', 'Set Shuffle Amount', 'Set Accent Amount'.
  • New: Added functions 'Track: Scroll Bank Page by 1 left', 'Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'FX Track: Scroll Bank Page by 1 left', 'FX Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'Scene: Scroll Bank Page by 1 left', 'Scene: Scroll Bank Page by 1 right'.
  • New: Added settings for 'Behaviour on Pause' and 'Behaviour on Stop'.
• HUI
  • New: Added track, device and EQ modes.
  • New: AUTO1-8 is used for knob press as well (e.g. used like this with X-Touch).
  • New: 'Paste' adds an instrument track.
  • New: 'Shift+Paste' adds an effect track.
  • New: 'Option+Paste' adds an audio track.
  • New: 'Copy' inserts/replaces a device.
  • New: 'Shift+Copy' inserts a device before the currently selected device.
  • New: Option+Copy' inserts a device after the currently selected device.
• MCU
  • New: Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
  • New: Added 'Channel Prev/Next' to the function commands which emulate the respective buttons for devices which do not have them.
• OSC
  • New: Added command to de-/activate a layer (/device/layer/{1-8}/activated).
• OXI One
  • New: Playing/recording clips do no longer blink.
• Push 1-3
  • New: In Clips and Markers mode the knobs control now the volume of the tracks.
  • New: Added Load/Save commands to the master mode.
• SLMk3
  • New: Project Parameter Mode - info display shows now the project name.
  • New: Track Parameter Mode - info display shows now the track name.
  • New: Parameter Mode - info display shows now the track name instead of the selected parameter page.
  • New: The first instrument of the track can now be edited (long press UP, then select 'First Ins').
  • Fixed: Selecting Project/Track parameter pages did not work.

24.0.0

• Requires Reaper 6.71+
• Added support for OXI One hardware sequencer.
• All devices
  • Fixed: Device detection was broken on Macos.
  • Fixed: Issues with parsing Reaper properties.
• Maschine JAM
  • Fixed: Extension crashed due to an ill-formatted sysex message.

23.2.2

• Requires Reaper 6.71+
• Akai Fire
  • New: When unselecting the last edit note in seqencers a notification is now shown that the note edit mode is off.
  • Fixed: In drum sequencers when the last edit note was unselected, it was deleted as well.
• HUI
  • New: Automation mode is shown in the display when a new mode is selected.
• Launchpad Pro
  • Fixed: Play mode restore did not work when combined with keeping Track Select button pressed.
• Native Instruments Kontrol Mk3
  • New: 'Metronome' can now also be selected to switch modes.
• Native Instruments Maschine Mk2/Studio
  • Fixed: Shift+Cursor left/right did not switch parameter pages.

23.2.1

• Requires Reaper 6.71+
• Fixed: Generate a marker name if none is set.
• AutoColor
  • Fixed: Delayed the color change a bit to allow Undo to work.
• HUI
  • Fixed: The right VU meter was not working
• Native Instruments Kontrol
  • New: Mute/solo states are switched off in Parameter and Send Mode to prevent that the graphics get darkened in the display. Mute/solo buttons can still be used but state will not be visible in these modes.
  • Fixed: Added missing Poly-Aftertouch (available in 88-key model).

23.2.0

• Requires Reaper 6.71+
• MCU
  • New: Added support for iCON V1-M (display RGB colors, 2nd display)
  • New: Send VU updates only if necessary.
  • Fixed: VU meters did not work anymore on iCON devices.

23.0.1

• Requires Reaper 6.71+
• Native Instruments Kontrol
  • Fixed: Browser/Plugin-buttons were inactive after track changes.
  • Fixed: Added missing support for Kontakt 7 plugin UI/light guide.

23.0.0

• Requires Reaper 6.71+
• LaunchkeyMini Mk3
  • New: In Custom mode Shift+Arp/FixedChord toggles between track/remote parameters and the program change buttons switch pages now to be consistent with device mode.
• Launchkey
  • Fixed: 88 version was not fully supported. Display and fader modes did not work.
• Launchpad
  • Fixed: Project/Track params mode: color indication on scene buttons were missing.
• Native Instruments Kontrol
  • New: Added support for Mk3 keyboards.
  • New: Added Track and Project parameter modes for S, A and M keyboards.
• OSC
  • New: Added /device/layer/{1-8}/volume/reset
  • New: Added /device/layer/{1-8}/pan/reset
  • New: Added /device/layer/{1-8}/send/{1-8}/volume/reset
  • Fixed: /track/{1-8}/send/{1-8}/volume/indicate did set the volume to 0.
  • Fixed: /track/{1-8}/send/{1-8}/volume/touched did set the volume to 0.

22.2.1

• Requires Reaper 6.71+
• All devices
  • Fixed: Controllers could be instantiated twice.
  • Fixed: Device modes could get stuck when switching to a track with less devices than on the previously selected track. Now the first plugin is selected. If there is no plugin on the track the index of the selected plugin is remembered until a track with at least 1 plugin is selected.
• Fire
  • New: Selecting an already selected folder track in mix mode does toggle the folder open/closed.
• LaunchControl XL
  • New: In transport mode (keeping 'Record Arm' pressed) button 5 triggers Undo and button 6 Redo.
• OSC
  • Fixed: /track/param/{-,+} and /project/param/{-,+} did switch 8 pages instead of 1.
• Push
  • Fixed: Improved button colors in simulator.

22.2.0

• Requires Reaper 6.71+
• All devices
  • Fixed: MIDI channel was not handled correctly for sequencer notes.
• Launchpad
  • New: The selected note for editing is automatically cleared when the note edit mode is closed.
• Push
  • New: Added Drum XoX sequencer.
  • New: By long pressing an edited note in the sequencers it can be deselected. If no more notes are selected the previous mode is restored.
  • New: Opening the track/layers detail mode is now only triggered on button up and if the select button was not used to select something.
  • New: Multiple tracks can now be un-/selected by keeping the select button pressed.
  • New: The Scenes/Clips and Markers modes stay now active when the session view is left.
  • New: Tracks can now be optionally navigated 'flat' (instead of 'hierarchical').
  • New: Added option to include the master track in the track list. This allows to have access to the clips on the master track.
  • New: Push 3: The button in the upper right switches now between the Session/Clips and Marker mode.
  • New: Push 3: In MIDI clip mode, turning the encoder selects the previous/next note for editing. Moving it left/right selects the previous/next clip page.

22.1.0

• Requires Reaper 6.71+
• APC40
  • Fixed: In drum sequencer the first 4 pads of the 2nd step row played sounds.
• Arturia Beatstep
  • Fixed: Knobs were totally broken. Additionally, prevented some weird parameter jumps.
• Electra One
  • New: Added knob sensitivity (speed) settings.
  • New: Made knob touch combinations configurable with plenty of options.

22.0.0

• Requires Reaper 6.71+
• All devices
  • New: Added a Reaper action to restart all controllers (DrivenByMoss: Restart all controllers).
  • Fixed: VST2/VST3 plugins with characters '-' or '+' in filename could be missing from the browser results.
  • Fixed: JS plugs with spaces in filename/folder were missing from the browser results if filtered by a Collection.
  • Fixed: Device INI files need to be loaded as UTF-8.
  • Fixed: Playing notes could not be parsed.
  • Fixed: Scenes (aka Range markers) were completely broken.
• Added support for Faderfox EC4 (requires Firmware 2.0).
• Electra One
  • Fixed: Next/previous marker page were flipped.
  • Fixed: Settings had Behaviour on stop instead of Behaviour on pause.
• Generic Flexi
  • New: Added option to directly route Program Change to DAW.
• Komplete Kontrol Mk2
  • New: Default values for knob speeds are much slower.
• Launchkey Mk3
  • New: Undo+Track button deletes the track.
  • New: In Session Mode the 'Stop Solo Mute' menu allows to set the New Clip Length with the buttons on the 1st row.
• Maschine Mk3
  • Fixed: Chord mode did crash when base note which is not part of the selected scale was played.
• MCU
  • New: The function keys F6-F8 can be now configured as well. Punch In/Out and Device on/off can now be selected from the list as well and are set as the default for F6-F8.
  • Fixed: Scrolling upwards in the browser did scroll by 64 steps.
• OSC
  • New: Added /scene/{1-8}/select to select a scene.
  • New: Added /scene/{1-8}/name to set the name of the scene.
  • New: Added /scene/{1-8}/color to set the color of the scene.
  • New: Added /clip/name to set the name of the cursor clip.
  • New: Added /clip/color to set the color of the cursor clip.
  • New: Added /crossfade/reset to resets the crossfader to center position.
  • New: Added /track/{1-8}/recordQuantization to get and set the default record quantization for the MIDI input of the track.
  • New: Added /track/param/bank/page/{+,-} to select the next/previous 8 parameter pages.
  • New: Added /project/param/bank/page/{+,-} to select the next/previous 8 parameter pages.
  • Fixed: Prevent unecessary restarts of OSC server.

21.5.2

• Requires Reaper 6.71+
• All devices
  • Fixed: On some Macos systems, Reaper could hang on startup.

21.5.1

• Requires Reaper 6.71+
• All devices
  • Fixed: Tracks could not be selected on some devices.
  • Fixed: Track parameter was empty when it's name was identical to the parameter on the previous track.
  • Fixed: If a plugin had a space in the filename or in the sub-folder it would not load (e.g. some JS plugins).
  • Fixed: Plugins which had the company name in parentheses '()' removed did not show up in the results list.
  • Fixed: Fix for C++ a memory issue (fingers crossed).
• Electra One
  • Fixed: Session mode: clip recording could not be started.
• Generic Flexi
  • Fixed: 'Device: Reset Parameter 1' command was missing.
  • Fixed: Could crash if no longer existing command was mapped.
• Launchpad
  • Fixed: Project/track remote parameter pages did scroll by 8 instead of 1 page.
• SL MkIII
  • Fixed: Parameter text values were not ASCII safe.

21.5.0

• Requires Reaper 6.71+
• Updated Java to 17.0.9+9.
• Electra One MkI + MkII
  • Requires Firmware 3.5
  • New: All knobs are now relative.
  • New: New page for controlling project and track parameters. Touch knobs 9, 10 and 11 to activate.
• Generic Flexi
  • Fixed: Set number of monitored browser results and filter column entries to 1 which speeds up the opening of the browser.

21.4.0

• Requires Reaper 6.71+
• Push
  • New: Support for the Push 3 encoder in Scene display mode.
  • New: Push 2/3: selected notes in clip note view are now drawn darker.
  • Fixed: Push 2/3: mute state of notes in clip note view were only drawn muted in the first step-part of the note.
  • Fixed: The play position was not drawn correctly in sequencer mode.
  • Fixed: Push 2/3 - List elements (Scale and Browser mode) were using black text on black background.

21.3.0

• Requires Reaper 6.71+
• All devices
  • New: Moved the parameter updates of the primary and EQ plugin on the normal thread (was slower on updates before).
  • New: Improved resolution of parameter changes with relative knobs. Fixes also the issue that too small speed settings led to no change at all.
• Auto Color
  • Fixed: Did crash on startup.
• Fire
  • Fixed: Do not toggle the plugin window when the select knob is pressed and turned to transpose the clip by octaves.
• Generic Flexi
  • New / Fixed: Added new relative knob mode 'Signed Bit 2'. The previously called knob mode 'Signed Bit' is actually the new 'Signed Bit 2'. IMPORTANT: This is a breaking change, so check all selected relative modes in your configurations!
  • Fixed: Selecting Send modes 1-8 from the configuration menu did not activate them.
• Maschine:
  • New: When switching tracks the previous selected play mode (PAD MODE or KEYBOARD) is recalled.
• Push
  • New: Push 2/3: Clip and session modes contain now track names. The mixer layout is changed accordingly for consistency. Reset the colors in the Push settings!

21.2.0

• Requires Reaper 6.71+
• All devices
  • Fixed: Button combinations on session grid did always execute clip play.
• Launchkey Mk3
  • Fixed: Parameter Pages 9-16 could not be accessed.
• Push 3
  • New: Added configuration page for audio interface

21.1.0

• Requires Reaper 6.71+
• Generic Flexi
  • New: Clip selection follows now track selection.
• Launchpad
  • Fixed: In session mode playing pads were not green and recording pads not red.
  • Fixed: Pro Mk3: Selected Play/Sequence modes were not restored correctly when switching back from Session.
• Maschine
  • Fixed: Do not show play mode notifications on devices with a display.
• Push
  • New: Push 1/2: Select+Add Device: Opens the favorites menu on the device page.
  • Fixed: Push 3: Only activate MPE on Play, Piano, Drum 64 and Drum modes. Also fixed non working button combinations when MPE was active.
  • Fixed: Push 3: Unsupported MPE pitch bend range is hidden in the configuration mode.
  • Fixed: MPE settings in configuration were not documented in the manual.

21.0.0

• Requires Reaper 6.71+
• All devices
  • Fixed: Fixed an exception with controllers not having user parameters.
  • Fixed: Improved feedback of automation modes.
• Generic Flexi
  • Fixed: Switching project/track remote pages was triggered twice.
• HUI
  • New: RecRdyAll toggles rec arm state on all tracks.
  • New: Option+Jog Wheel - Change tempo (press Shift for fine adjustment).
  • New: Control+Jog Wheel - Change loop start (press Shift for fine adjustment).
  • New: Alt+Jog Wheel - Change loop length (press Shift for fine adjustment).
  • Fixed: Clip related function did not work when assigned to F1-F8 buttons.
• MCU
  • New: Shift+RecArm toggles rec arm state on all tracks.
• OSC
  • Fixed: /track/param did trigger project parameters.
• Push
  • New: Added support for Ableton Push 3.
  • New: Push 2: Removed unecessary Rec Arm, Solo and Mute from Cue channel.
  • New: Metronome volume has been moved into the metronome settings mode (long press metronome button).
  • New: Improved session configuration mode. Easier selection of what to show on the display.
  • New: 'Add Track' mode has now 7 favorites for each track type as well as 7 device favorites.
  • Fixed: Push 1: Master volume graphical representation was not missing line if VU mode was active.
  • Fixed: Do not notify tempo value when tempo knob is used in browser mode to scroll results.

20.3.2

• Requires Reaper 6.71+
• All devices
  • Fixed: Improved Undo state when changing volume and panorama.
• Generic Flexi
  • Fixed: Crash on startup when keyboard MIDI channel was set to Off.

20.3.1

• Requires Reaper 6.71+
• All devices
  • Fixed: Implemented a workaround to distinguish MIDI ports with the same name, like Behringer X-Touch extenders.
• Gamepad
  • New: Added different options for the range of MIDI CC values sent for each axis.
• Generic Flexi
  • New: Added functions for 1st instrument device.
  • New: Added more functions to navigate project/track remote pages.
  • Fixed: Track Remote functions did also show up in Track functions but did not work.
• OSC
  • Fixed: The Open Stage Control template did still send /user commands for touch events.
• Push
  • Fixed: Removed unecessary pad mode notifications on track selection.
• SL MkIII
  • Fixed: Did crash on startup.

20.3.0

• Requires Reaper 6.71+
• All devices
  • New: Updated JDK to 17.0.7+7.
  • New: Sends can now be changed for send channels as well.
  • Fixed: 'New clip' function must not enable record-arm if track is set to automatic record-arm.
• APCmini
  • Fixed: Send channels could not selected.
• APC40 mkII
  • New: Press USER to select the user mode to control project and track parameters. Press again to toggle between the project and track parameters.
• Fire
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters.
• Generic Flexi
  • New: User parameter commands are replaced with commands for project and track parameters (Project Remotes / Track Remotes).
• Launchkey Mini
  • New: The User mode was replaced with the Project Parameters mode to change project parameters.
• Launchkey Mk3
  • Fixed: Toggling groups open/closed always got triggered twice.
• Launchpad
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Up/down button switches between them. Left/right switches pages.
• Maschine
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Cursor left/right switches between them. Encoder up/down buttons switches pages.
• Maschine JAM
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. SELECT+CONTROL switches between them.
• MCU
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Fader bank left/right switches between them. Channel left/right switches pages.
• OSC
  • New: Increased the number of configurable actions to 20.
  • New: There is now a setting to choose between flat and hierarchical track navigation.
  • New: /user commands are replaced with according /project and /track commands. OpenStageControl template got updated to reflect this (but only with /project commands).
  • Fixed: Send attributes could not be changed (except volume).
• Push
  • New: The user mode gives now access to the master and track parameters. First 2 buttons of the 2nd row toggle between the master track (Project) and selected Track parameters.
  • Fixed: Only the first 8 scenes could be launched in Scenes view.
• SLMkIII
  • New: The user mode has been replaced with a Project FX and Track FX mode. Keep the UP button pressed and select the modes with the 7th/8th row button. These modes give access to the project and track parameters.
• Turn
  • Fixed: Only the first 8 scenes could be launched in Scenes view.

20.2.1

• Requires Reaper 6.71+
• All devices
  • New: Increased the scrolling speed with the mouse wheel in the configuration dialog.
  • Fixed: Moving the play cursor happens now in beats/bars as intended.
  • Fixed: Track mappings did not get updated when a track outside the current bank page was selected in Reaper.
• Generic Flexi
  • Fixed: MIDI feedback from on/off values did sent 1/0 instead of 127/0.
• Launchkey Mk3
  • Fixed: Wrong mode was set after closing the browser.
• MCU
  • Fixed: Fader flip did not work in Instrument mode.

20.2.0

• Requires Reaper 6.71+
• Added support for the ESI Xjam controller
• All devices
  • Fixed: Parameter values were not shown on the controls in the simulator.
• Komplete Kontrol MkII
  • New: Make sure that the same slot is selected when switching tracks.
• MCU
  • Fixed: Added missing EQ and INST buttons to simulator.

20.1.0

• Requires Reaper 6.71+
• Launch Control XL
  • Fixed: Moving drum pad range was broken.
• Launchpad, Push
  • Fixed: Clip Length mode was not always recalled.
• MCU
  • Fixed: Device froze when there were no sends and send 2 was selected.
• OSC
  • Fixed: Moving drum pad range was broken.
• SLMkIII
  • Fixed: Set knob layout only when necessary.

20.0.0

• Requires Reaper 6.71+
• APC40
  • New: MkI: Press Shift+Device On/Off button to open/close the browser (was Shift+Stop All Clips).
• APCmini
  • New: Existing scenes have now the color green. The selected scene blinks green.
• Fire
  • New: Toggling the Birds Eye view in session mode (SHIFT+PERFORM) directly closes the Shift mode and displays an info in the display which mode is selected.
• Launchkey Mini
  • New: Mini: The executed functions when Stop/Solo/Mute is pressed are displayed.
• MCU
  • New: OPTION + press a knob which controls a send level toggles the send mute on/off.
• OSC
  • New: Added sending: /track/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added sending: /device/layer/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added receive: /track/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
  • New: Added receive: /device/layer/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
• Push
  • New: Use Select+Clip/Scene to select it.
  • New: The birds-eye view in Session mode is now activated by holding Shift+Select.
  • New: Sends can be dis-/enabled. Keep SHIFT pressed, then additionally SELECT and finally touch a knob which modifies a send.
  • New: Added some CLAP devices to the Add Track settings.
  • Fixed: Birds-eye view in Session Mode had a blinking issue.
• SL Mk II
  • Fixed: Transport commands did not work in Play mode.
  • Fixed: Display of scene names did not work for non-existing scenes.
• Turn
  • New: Hold Select to select a clip without starting playback.

19.2.2

• Requires Reaper 6.71+
• All devices
  • New: Set note repeat octaves to 1 as default.
  • New: Automation recording volume and panorama does now only create 1 undo point.
• Generic Flexi
  • New: Documented Shift button function in the manual.
  • Fixed: Renamed 'Parameters' to 'Device' in the selected mode list to match the naming in the function lists.
• Maschine Mk2 / Studio
  • Fixed: The poly aftertouch settings in the template were off by 2 octaves and therefore did not work. Please install the new template to fix this.
• Push 1
  • Fixed: Low pad threshold warning was not displayed in the info mode (and caused a crash).
  • Fixed: Firmware version was not displayed in info mode.

19.2.1

• Requires Reaper 6.71+
• All devices
  • New: Sped up arranger position changes (play position, loop, etc.). Normal, changes now 1 bar and slow, 1 quarter.
• Electra One
  • New: The last active mode is restored when returning from a different preset.
  • Fixed: Values were still set in other presets when changes appear in the DAW.
  • Fixed: Mode did not update the values when jumping back from a different preset.

19.2.0

• Requires Reaper 6.71+
• All devices
  • Fixed: Parameter formatting was broken in 19.1.
• Electra One
  • Requires Firmware 3.1!
  • New: Labels for parameter values are now set.
  • New: Knob touch states are now available which allows smoother value updates and automation touch mode to work.
  • New: Play position and tempo can now be changed with knobs.
  • New: Replaced Cue Volume with Play Position on all pages. Cue Volume is now available on the Transport page.
  • New: Added a Session mode for launching scenes/clips and more.
  • New: Quick navigation between pages by touching 3 knobs (see the manual).
  • New: Jump to a specific Electra One synthesizer preset for editing the plugin in focus. The preset must have the same name as the preset.
• LaunchControl XL
  • Fixed: Crash when setting the drum or note sequencer resolution.
• Launchpad
  • Fixed: Browser did not open on tracks without a device present.
  • Fixed: Do not leave user mode on track change.
• MCU
  • New: Master Track mode is only activated on master track selection if the current mode is the Track mode.
  • New: Use the first instrument of the track for layer navigation instead of the cursor device.
• Push
  • New: If ribbon controller is set to the mode 'Fader' or 'Last Touched' it can now be combined with the delete button to reset the respective parameter to its' default value.
  • New: Added / updated several devices for the 'Add Track' - favorite devices settings.

19.1.0

• Requires Reaper 6.71+
• All devices
  • Fixed: Fixed some issues with the device bank could e.g. cause cursor LEDs to be not lit correctly.
  • Fixed: Formatted values of ReaEQ gain parameters were not correct.
• Fire
  • New: Device and parameter page names are shown now in two lines instead of one.
• Launchpad
  • New: Added clip length (loop area) mode. Press User/Custom on the Pro models. On the other models use the mode selection.
  • New: User parameter mode is now available on all models.
  • New: Pressing Device button twice switches to User parameter mode.
  • New: Rearranged the functions of the Scene buttons in Device mode. Last button opens now the browser.
  • New: Improved harmonization of mode colors.
  • Fixed: Pro Mk3: Tracks could not not be selected.
• Maschine
  • Fixed: Erase+Master Knob did not work to reset parameters.
• Push
  • New: The 'Clip' mode was renamed to 'Clip Length'. The length (actually the loop) is now colored in the clips' color.

19.0.0

• Requires Reaper 6.71+
• Added support for Electra One controller.
• All devices
  • Fixed: Navigating track groups hierarchical did not update the fader/knob bindings.
  • Fixed: Changing some track parameters did not alter the undo state in Reaper (e.g. mute and solo).
• Generic Flexi
  • Fixed: Browser - Scroll Filter Column did crash.
  • Fixed: Browser - Scrolling in browser mode did always scroll down.
  • Fixed: Last selected mode was not set after restart.
• Launchpad
  • New: Set the default for Shift+Record to New clip + enable automation.
  • New: Added a brightness setting for the pads. Only available on Mini Mk3 and X.
  • Fixed: New record command configuration was broken on non-pro models.
• MIDI Monitor
  • New: Added number of bytes to system exclusive message logs.

18.5.0

• Requires Reaper 6.71+
• All devices
  • Fixed: Poly Sequencer: Registration of notes is more reliable.
  • Fixed: Fixed a NullPointerException with parsing preset files.
  • Fixed: Extension could not be loaded on older Linux systems.
• Komplete Kontrol MkII, Launchkey / Mini, Launchpad, Maschine
  • New: Added new record button options to additionally enable automation writing.
• Launchpad
  • New: Sequencers have now a note editing mode. Long press a step with a note to activate the note editor.
  • New: Pro Mk3: State of metronome is shown on Solo/Click button when Shift is pressed.
  • New: Changing note repeat with cursor up/down+pad in sequencers works now also for Poly Sequencer.
  • New: Record button (and Shift+Record button) can now be configured (instead of only being able to be flipped).
  • New: Scene buttons in device mode have more functions: enable device, toggle user interface, toggle pinning.
  • Fixed: Broke some cursor commands (e.g. tempo change) while fixing note repeat in 18.4.

18.4.0

• Requires Reaper 6.71+
• All devices
  • New: Removed reading from track chunk completely (also removed the related Debug option) since it causes too much performance issues. This loses track deactivation and record quantization states.
  • New: Parameter names in the mapping dialog can now be emptied. By doing so the original name is used. Use this for parameters which change their name (e.g. the 8 macros in Native Instruments Massive).
  • Browser
    • New: Browser columns can now be hidden.
    • New: Support CLAP plugins in the browser.
    • New: Preferences of duplicated plugin types are filtered as well, e.g. hides VST3 version of u-he Bazille if CLAP version is preferred.
    • New: Location was replaced with Architecture.
    • New: Support braces in NOT arguments in smart folders.
    • Fixed: Presets in the browser do now load immediately.
  • Fixed: Setting of clip color does finally work.
• MCU
  • New: Shift+Track selection buttons: Multi-select tracks (Setting the length of a new clip is now on ALT combination). Allows to change volume, pan, solo, mute and rec arm for multiple tracks at once.
  • New: Save button is lit if project was changed and needs to be saved.
• OSC
  • Removed the TouchOSC template which is outdated. Please switch OpenStageControl instead.
• Push 1/2
  • New: Changes to pre-roll in the Metronome dialog now directly reflect to the controller. Changing pre-roll on the controller is now also applied directly but still does not change the values if the Metronome dialog is open (needs to be closed and reopened to show the effect).
  • Fixed: Display was off (or empty) when the default Reaper project did not contain any tracks.
  • Fixed: Scene buttons did not work in Piano play layout.

18.3.0

• Requires Reaper 6.12+
• All devices
  • New: Drum sequencers: When changing note range up/down the offset is now shown on-screen instead of the range (which was wrong anyway).
• APC40, APCmini, Fire, Launchpad, Maschine JAM, Push.
  • New: Added setting 'Start with session view'.
• APC40
  • Fixed: MkI: Pads in Drum and Play mode did sound wrong notes.
• Generic Flexi
  • New: Added new functions: 'Device: Toggle Parameter 1-8'.
  • New: Added new function: 'Master: Select'.
• Launchpad
  • Fixed: Record and toggle overdub did not work in Shift view.
  • Fixed: Loop area was not drawn when extra function buttons were active.
• MCU
  • New: Switching devices or parameter pages shows the device and page name as a notification.
  • New: Control+Jog Wheel - Change loop start (press Shift for fine adjustment)
  • New: Alt+Jog Wheel - Change loop length (press Shift for fine adjustment)
  • Fixed: X-Touch - Notification messages might not be seen due to black displays.
• Push
  • New: When changing loop length in Clip view, the second pad can now be pressed multiple times without the need to press the first again.
  • Fixed: Changing loop length in Clip view did not work with 1/16th resolution selected.
  • Fixed: Clip view was not selected on startup if an audio track was selected.

18.2.0

• Requires Reaper 6.12+
• Added header to manual.
• APC40
  • New: Footswitches are now configurable in the settings.
  • Fixed: 12th page pad was off in drum mode.
  • Fixed: MkI: Drum pads in Drum Mode did not send notes.
• Generic Flexi
  • Added new functions: 'Device: Reset Parameter 1-8'
  • Added new functions: 'User: Reset Parameter 1-8'
• Maschine / Jam
  • New: Footswitch options contains now the option to send sustain (CC 64).
• OSC
  • New: Added message: /device/param/{1-8}/exists
  • New: Added message: /device/page/{1-8}/exists
  • Fixed: Fixed velocity should not be applied to aftertouch.
• Push
  • New: Changing play position now show also measures in the display.
  • New: Select + Master knob: Zoom in/out of arranger.
  • New: Clip view is now the default for audio tracks.
  • New: Footswitch options contains now the option to send sustain (CC 64).

18.1.0

• Requires Reaper 6.12+
• All devices
  • New: Browser dialog has now an info text about the intent of the browsing.
  • Fixed: First instrument device had always only 1 parameter.
  • Fixed: Changing metronome volume did not work.
• Fire
  • Fixed: Regression introduced in 18.0, button LEDs did not update.
• Generic Flexi
  • Fixed: 40th label in the Number field was named indexed as 30th.
• MCU
  • New: Added functions to browser mode:
    • Arrow up/down - Switches to the previous browser tab (if any)
    • Arrow left/right - Switch to insert a device after the currently selected device (if any)
    • Zoom - Switch to replace the currently selected device (if any)
    • Jogwheel - Scroll the results
• Push 1
  • Fixed: Browser mode could crash if presets contained non-ASCII characters.

18.0.0

• Requires Reaper 6.12+
• Added support for Yaeltex Turn.
• All devices
  • Fixed: Insert track did not insert it after the selected track but after the next track.
• APC40 mkII
  • New: Selected notes in sequencers are now yellow (instead of white).
• Maschine
  • Fixed: Source Aftertouch messages were always sent additionally to the setting of Convert Aftertouch.
• MCU
  • Fixed: Crash when Master fader was touched in flip mode.
  • Fixed: State of Flip LED was not correct.
• OSC
  • New: Added /scene/color
  • New: Added /device/page/{1-8}/name for consistency reasons
  • New: Added /device/sibling/{1-8}/exists
  • New: Added /device/sibling/{1-8}/bypass
  • Fixed: /track/bank/{+,-} did not report the track selection as Off if the selected track went out of the page.
  • Fixed: /device/param/bank/page/{+,-} did not jump 8 pages but only 1.
  • Fixed: /device/param/{+,-} did not jump 1 page but 8.

17.6.0

• Requires Reaper 6.12+
• APC40 mkI/II
  • New: Drum mode provides functions to select drum pads without sounding them.
  • New: Note Repeat can now be used in the play and drum mode.
  • New: Added note repeat settings.
  • New: Added settings Display clips of record enabled tracks in red, Action for pressing rec armed empty clip and Turn off empty drum pads.
  • New: Shift + Tap Tempo: Inserts a new marker at the current play position.
  • New: Cursor right: Move track bank focus 8 tracks up
  • New: Cursor left: Move track bank focus 8 tracks down
  • New: Shift+Cursor right: Selects the next marker to the right of the play cursor.
  • New: Shift+Cursor left: Selects the next marker to the left of the play cursor.

17.5.0

• Requires Reaper 6.12+
• Increased length of parameter names in Parameter configuration dialog.
• Support for Novation LaunchControl XL
• Beatstep
  • New: Toggle Window button uses different colors depending on window state (blue = closed, pink = opened).
  • New: Removed the useless track navigation functions in the track mode and added rec arm and toggling folders instead.
  • Fixed: Prevent view change on track change, which is confusing on the Beatstep since it leaves Track view.

17.1.0

• Requires Reaper 6.12+
• Fire
  • Fixed: Knobs did not work after leaving note edit mode.
• MCU
  • New: Added volume automation of master fader.
  • Fixed: Touch state for touch automation recording was not always correctly set.
  • Fixed: Volume envelope data was not sent to master fader.
• Push
  • New: Push 2: The 4th button above the display now moves to the next sends page. Combine with Shift to move backwards.
• APC40, APCmini, Launchpad, Launchkey Mini, Maschine, Maschine Mikro, Maschine JAM, Push
  • New: Renamed 'Behaviour on Play' to 'Behaviour on Pause' and renamed the options as well.
• Fire, Force, HUI, Kontrol mkI/II, Launchkey, MCU, MPC, SLmkII/mkIII
  • New: Added additional setting 'Behaviour on Pause' triggered by play button.

17.0.0

• Requires Reaper 6.12+
• Fire
  • New: Added a new drum mode, see manual for details.
  • New: The last selected note/sequencer view is remembered when switching to session/mix and back.
  • New: All LEDs are full turned off on shutdown and a Goodbye message is displayed.
  • New: Session mode: ALT + pad selects clip (without starting playback).
  • New: Bank button + Touch knob: Resets the knobs value to the default value.
  • Fixed: Black pads were not fully turned off.
  • Fixed: Do not leave Mix mode on track selection.
• Komplete Kontrol MkI
  • New: Works now on Apple Silicon.
  • Fixed: USB resources were not freed on shutdown.
• Launchkey
  • New: Added detection for Launchkey 88
• MCU
  • Fixed: Knob LEDs went off when panorama was panned fully left.

16.4.1

• Requires Reaper 6.12+
• Generic Flexi
  • New: Added setting to directly route expression (CC 11).
• MPC
  • New: Q-Link knobs are working now (requires MPC Firmware 2.11).

16.4.0

• Requires Reaper 6.12+
• All devices
  • New: The selected device page is restored when switching between devices.
  • New: Added 'Refresh MIDI Ports' to the Debug menu, which re-scans all available MIDI devices and restarts all controllers. This is useful if multiple controllers were switched on after the start of Reaper.
  • Fixed: If Automation-Trim mode is active faders are no longer moving.
• APC40, APCMini, Fire, JAM, Launchpad
  • New: Added setting for the preferred default note view (e.g. Play, Drum, Sequencer, ...).
• APC40, APCMini, Fire, JAM, Launchpad, Push
  • New: Added new scale layouts: Staggered Up and Staggered Right
• Generic Flexi
  • New: Added new functions 'Layout: Zoom in arranger timeline' and 'Layout: Zoom out arranger timeline'.
• Komplete Kontrol Mk1
  • Fixed: Expression pedal triggered start/stop instead of sending expression data.
• Komplete Kontrol A/M-Series
  • New: Send and Parameter modes could be activated on these models as well by pressing Shift+Stop (=CLEAR) which was not intended. The labels are now adjusted to make this usable on these models as well. Only drawback is that the display always shows 'Vol' or 'Pan' but everything else works nicely.
• MCU
  • New: Pressing a knob can now be combined with modifier keys: SHIFT - set parameter to center value, CONTROL - set parameter to minimum, ALT - set parameter to maximum.
  • Fixed: Previous/next mode function for function keys did not display the selected mode. Also the modes do now wrap around at the beginning/end.
  • Fixed: Previous track mode was not restored when leaving master track.
  • Fixed: EQ parameter paging did not work correctly.
• MCU - X-Touch
  • Fixed: In Master mode audio engine and project displays were off. In parameter modes displays are now switched off for not existing parameters.
• Novation SLMkIII
  • New: Let program changes pass through to Reaper.
• OSC
  • Fixed: Several formatting issues in the manual.

16.3.1

• Requires Reaper 6.12+
• MCU
  • Fixed: Fixed a crash in Track mode and increased the number of sends to 14 in that mode.

16.3.0

• Requires Reaper 6.12+
• All devices
  • Fixed: Automated mute was inverted on the controller since the envelope is actually inverted.
• Launchkey Mini Mk3
  • New: When a second row mode is active on the pads, scenes are scrolled by one.
• Maschine JAM
  • New: GRP - Activates changing the play position with the encoder. This was previously GRID+Encoder, which broke using the GRID button for quantizing the selected clip. When toggled by pressing the encoder it changes the loop start position. Hold SELECT to change the loop length.
• MCU
  • New: Option+Marker - Inserts a new marker at the current play position.
  • New: Option+<< - Move the play cursor to the closest marker before the current play position.
  • New: Option+>> - Move the play cursor to the closest marker after the current play position.
  • New: Option+BANK left/right - Moves the selected device to the left/right.
  • New: Option+CHANNEL left/right - Moves the selected track to the left/right.
  • New: Added setting 'Workflow: Activate Volume mode on Fader Touch'.
  • New: Track mode shows now sends 7 and 8 on 2nd device.
• MCU - X-Touch
  • New: Sends use the colors of their channel in track mode.
  • Fixed: Prevent color black to be used for tracks and markers (replaced with gray).

16.2.0

• Requires Reaper 6.12+
• All devices
  • Fixed: Device window was opened when clip was selected.
• All devices with pad grid
  • Fixed: 3rd shift in chromatic mode was not correct.
• Push 1/2
  • New: Arrow left/right now changes the track/devices page.
  • New: Shift + Arrow left/right in device mode moves the selected device to the left/right (but only in the page).
  • New: Shift + Arrow left/right in track modes moves the selected track to the left/right (but only in the page).
  • New: Added option to ribbon modes 'Last Touched'. This allows to change the parameter which editing knob was last touched.
  • New: Mute + Device in device mode toggles the enabled state of the device.
  • New: Disabled devices are now drawn in the background color on Push 2. On Push 1 disabled devices have a prefixed division sign.
  • New: Push 1: Always show full name in track/layer details mode. The track type is now displayed as well.

16.1.0

• Requires Reaper 6.12+
• MCU
  • New: Added hardware profile for Behringer X-Touch.
  • New: EQ calls up new EQ mode which always edits the parameters of the ReaEQ on the track.
  • New: INST calls up new instrument mode which always edits the parameters of the first instrument on the track.
  • New: DROP duplicates the selected track.
  • New: SOLO deactivates all solos, Shift+SOLO deactivates all mutes.
  • New: If 'display track names' is enabled and track mode is active, only the name of the selected track is displayed instead of the volume label.
  • New: Setting to use 7 characters in the display instead of 6 characters and a blank character. Makes sense for devices which do not have one large display but 8 separate ones which have a space in between already.
  • New: Setting 'Display colors (Behringer X-Touch)' enables the display back-light colors on the Behringer X-Touch and X-Touch Extender models.

16.0.0

• Requires Reaper 6.12+
• New: Support for Gamepads!
• All devices
  • New: Changing play position and loop start/length will stick to the closest grid position.
  • Fixed: Crash when there is no device selected.
• Launchpad:
  • New: Improved the 4 step change of virtual faders on already lit pads. It changes now the direction when the maximum or minimum value of the pad is reached instead of wrapping around.

15.6.0

• Requires Reaper 6.12+
• All devices
  • New: A Reaper action was added to open the parameters dialog (assign this to a keyboard shortcut).
  • New: Controller running states are shown with icons and tooltips.
  • Fixed: Reordering parameters (move up/down) in the parameter dialog mapping was not stored.
• Generic Flexi:
  • New: Added functions for controlling ReaEQ equalizer, which is automatically inserted if one of the functions is triggered.
  • Fixed: Updated/corrected the names of CC and MMC commands.
  • Fixed: Resolution was set to 14-bit on first slot when CC was less than 32 on file load.
• Komplete Kontrol Mk1
  • Fixed: Shift+Play to create a new clip did not work.
• MCU
  • New: Option+Toggle Device: Toggle the devices' expanded state.
  • Fixed: 'Selecting a device, does now select it in the device chain' did not work for device navigation.
• MidiMonitor
  • Fixed: Updated/corrected the names of CC and MMC commands.
• OSC
  • Fixed: Removed unnecessary inversion of Q-factor parameter. Inverted Q-factor knob in Open Stage Control example template instead.
  • Fixed: Not all EQ parameters did work.

15.5.0

• Requires Reaper 6.12+
• All devices
  • New: Added editor for parameter mapping of devices.
  • New: Selecting a device, does now select it in the device chain.
  • New: Improved speed of opening browser.
  • New: Replaced colored buttons with icons.

15.4.0

• Requires Reaper 6.12+
• Fire
  • New: In Mix mode Mute/Solo 1 moves the play cursor to the start of the arranger loop and Mute/Solo 4 moves the play cursor to the end of the arranger loop.
  • New: In Mix mode the select knob does now change the play position.
• Launchpad
  • New: Improved virtual faders for stepped values.
• MCU
  • Fixed: Wrong setting label Use vertical zoom to change tracks but must be Use vertical zoom to change modes. Documentation was wrong, too.

15.3.0

• Requires Reaper 6.12+
• Generic Flexi
  • New: Support for MPE.
• Launchpad
  • New: If Fixed Accent is active the loop/clip length area now shows 15 velocities. The selected velocity is used when enabling a note in the sequencer.
• Push 1/2
  • New: If Accent is active the loop/clip length area now shows 16 velocities. The selected velocity is used when enabling a note in the sequencer.

15.2.1

• Requires Reaper 6.12+
• All devices
  • Fixed: Devices with empty MIDI input or output ports could not be configured.

15.2.0

• Requires Reaper 6.12+
• All devices
  • New: Improved handling of MIDI devices. Missing devices (e.g. if turned off or not connected) are no longer overwritten in the settings. Missing devices are shown as missing in the selection box. Devices are sorted alphabetically. When Rescan is pressed and a missing device shows up it is selected. Controllers with missing devices are not started. Missing or not configured ports are shown in the log.
• Generic Flexi
  • New: New functions to select device parameter pages 1-8.
• Launchpad
  • New: Added option to choose action for pressing an empty clip on a record enabled track.
• Mackie HUI
  • New: Added New Clip Length setting to be used with footswitch and function-keys commands New Button and Clip Based looper.

15.1.0

• Requires Reaper 6.12+
• APC40 / APC40 mkII
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: Left cursor + Cue Level knob: Changes arrange loop start (combine with Shift for small changes).
  • New: Right cursor + Cue Level knob: Changes arrange loop length (combine with Shift for small changes).
• Push
  • New: Marker pages can be switched with left/right cursor key (no need to press Shift).
  • Fixed: The open folder icon was missing.

15.0.0

• Requires Reaper 6.12+
• All devices
  • New: Vertical scroll selected tracks into view (not only in mixer).
  • New: Updated to JDK 17.
  • Fixed: There were some issues with markers.
  • Fixed: Data sent on the low-priority thread was not sent when a data refresh was requested.
• Akai Fire
  • Fixed: Some missing settings were not documented in the manual.
• Akai Force
  • New: SELECT + COPY - Creates a new scene.
• Akai Force / MPC
  • New: COPY - Duplicates the selected clip and starts it.
  • New: Undo button is dimmed if undo (or redo with Shift) is not possible.
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: The loop start and length is displayed and can be changed.
• Generic Flexi
  • New: Increased number of slots to 300.
  • New: Selecting an already selected group track toggles its' expanded state.
• Komplete Kontrol Mk2
  • New: Undo button is off if undo (or redo with Shift) is not possible.
  • New: Selecting an already selected group track toggles its' expanded state.
• Launchkey Mk3
  • New: Selecting an already selected group track toggles its' expanded state.
• Launchpad Pro Mk3 / Launchkey Mk3 / Push 2
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: Improved auto detection depending no Linux version.
• Maschine+, Maschine Mk2 / Mk3, Maschine Studio, Mikro Mk3
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: Press Swing button twice to select Arrange Loop Start mode.
  • New: Press Swing button three times to select Arrange Loop Length mode.
  • New: Multiple footswitch support (2 on Mk3 / Plus, 4 on Studio), e.g. use a Boss FS-6 with a stereo cable.
• Maschine Jam
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: Multiple footswitch support, e.g. use a Boss FS-6 with a stereo cable.
• MCU
  • New: Selecting an already selected group track toggles its' expanded state (if track navigation is set to flat).
• Novation Remote SL, Mk I, Mk II, SLMkIII
  • New: Selecting an already selected group track toggles its' expanded state.
• OSC
  • New: Selecting an already selected group track toggles its' expanded state.
• Push
  • New: Selecting an already selected group track toggles its' expanded state.
  • New: Push 1: For group tracks different characters are prefixed to show the opened state of a group track.
  • New: Push 2: Track icon shows the opened state of a group track.
  • New: Select + Tempo knob: Changes arrange loop start (combine with Shift for small changes).
  • New: Select + Position knob: Changes arrange loop length (combine with Shift for small changes).
  • New: Undo button is off if undo (or redo with Shift) is not possible.
  • New: Delete + 1st row buttons in Marker mode deletes marker.
  • New: Improved auto detection depending on Linux version.
  • Fixed: Push 1: Add Marker text was missing in marker mode and button LED was not lit.

14.1.0

• Requires Reaper 6.12+
• All devices
  • New: The Debug menu contains now an option to disable reading of the track chunk, which is by default enabled. This fixes issues with large sample plugins in the project (e.g. Kontakt or Omnisphere) but loses track deactivation and record quantization states.
• Generic Flexi
  • New: Scene: Create Scene: - Creates a new scene at the end of the scene list.
• Launchpad
  • New: Drum mode: The loop length area has now new functions. There is one red button on the right bottom to toggle the functions on and off. If enabled, the 2nd row contains the previous combination buttons. The first row now allows to toggle note repeat, enable the selection of note repeat period with the Scene buttons, enable the selection of note repeat note length with the Scene buttons.
• OSC
  • New: /scene/add - Creates a new scene at the end of the scene list.
• Push
  • New: Select+Duplicate: Creates a new scene at the end of the scene list.
  • Fixed: Push 1: Notification messages on the display were canceled too early.

14.0.0

• Requires Reaper 6.12+
• Support for Akai MPC Live
• Support for Akai MPC Live II
• Support for Akai MPC One
• Support for Akai MPC X
• Support for Akai Force
• All devices
  • New: Arrange and launcher overdub on/off are now mapped to MIDI overdub/replace of the selected track.
  • New: Follow playback triggers View: Toggle auto-view-scroll during playback.
  • New: Create scene: Is now emulated by inserting a new region marker after the last region marker in the project (or at the beginning of the project if there is no region marker yet). The length is taken from the 'new clip length' setting.
  • New: Duplicate scene: Is now emulated by duplicating all clips in the time range of the region. The new clips are inserted after the current region (all other clips are moved back) and a new region is created for duplicated clips.
  • New: Create scene from playing clips: Is now emulated by duplicating the region which contains the edit cursor (if any).

13.7.0

• Requires Reaper 6.12+
• All devices
  • New: A browser window is now simulated in Reaper, which makes the browser finally usable on devices without a display.
  • New: Browser: Filters for AU and AUi are only shown if present.
  • New: Browser: Categories for JS plugins are integrated in VST categories.
  • New: Improved adding of tracks with devices (faster and more reliable).
  • New: For Instrument tracks input is set to all MIDI inputs and overdub is activated.
  • New: Preserves the index of the selected device when switching tracks, e.g. if the 2nd device on a track is selected, switching to another track will have the 2nd device on this track selected, if one exists.
  • New: Tracks can now be pinned.
  • New: Improved output message when Java DLL could not be loaded.
  • Fixed: Browser preset selection was wrong when there were more than 9 presets.
• Beatstep
  • Fixed: Play button did not work.
  • Fixed: The template had set the wrong global MIDI channel (1 instead of 3).
  • Fixed: The manual missed the command tables for all modes.
• Generic Flexi
  • New: MIDI channel can be set to All but this will disable the reflection of the value to the device.
• Launchpad
  • Fixed: Clips in session mode were always shown in orange when not playing.
• Push 2
  • New: A pinned track shows a pin as its' icon.

13.6.0

• Requires Reaper 6.12+
• All devices
  • Fixed: Metronome volume could not be changed.
• Fire
  • New: Multiple notes can be selected for editing.
• Komplete Kontrol MkI
  • Fixed: Scale LEDs were not set correctly.
• Launchpad
  • New: The note repeat octave range can now be changed in the Shift Mode (the two red buttons right to note repeat on/off).
  • Fixed: Tempo and Swing values could not be changed.
  • Fixed: Chord mode: additional notes did not respect the velocity (accent) setting.
• Maschine / Mikro Mk3
  • New: Multiple notes can be selected for editing.
  • New: Mute+Pad in Sequencer toggles the mute state of the note.
  • New: Sequencer colors in drum and note sequencer are harmonized. Muted notes are gray. The selected notes to edit are yellow.
• Maschine JAM
  • New: Mute+Pad in Sequencer toggles the mute state of the note.
• Push
  • New: Mute+Pad in sequencers toggles the mute state of the note.
  • New: Selected notes in sequencers are now lit in yellow.
  • Fixed: Could not switch pages with Shift+Left/Right.
• Novation SLMkIII
  • New: Added knob speed settings.
  • New: Selected notes in sequencers are now lit in yellow.

13.5.0

• Requires Reaper 6.12+
• All devices
  • Fixed: Playing notes showed errors in the log.
• Launchpad
  • Fixed: Mix mode was left straight after entering it.
• Launchkey Mini Mk3
  • New: The upper part of the mode selection view provides additional functions: Toggle metronome, Tap Tempo, Undo, Redo, Quantize, Add instrument, audio and effect track.
  • Fixed: Custom Modes were not displayed on change.
• Launchkey Mk3 / Mini Mk3
  • New: Added option for the action to execute when stopping playback.
• Push 1/2
  • New: Multiple notes can now be edited in sequencers. Use the select button in combination with a sequencer note pad.
  • New: To decrease ratcheting use now Shift + Select + Sequencer note pad.
  • New: Notes in Poly Sequencer can now be edited, too.
  • New: Renamed first note edit page to 'Common'. Set gain to 50% when resetting (was 0%).
• Novation SLMkIII
  • New: A new clip can be created from the track menu.
  • New: Long press a note in the sequencer to edit the note

13.0.1

• Requires Reaper 6.12+
• All devices
  • Fixed: Certain notification messages could crash devices with text display.
• Generic Flexi
  • Fixed: Toggling a value with a MIDI note did not work if Note off (0x80) was sent on note release.
• Maschine JAM
  • New: Removed blinking from playing clips.

13.0.0

• Requires Reaper 6.12+
• All devices
  • New: Muted notes are lit in gray in all sequencers.
• Maschine
  • New: Smoother update of note edits.
  • Fixed: Changing note velocity could delete note when set close to 0%.
• Push 1/2
  • New: Smoother update of note edits.
  • New: Support for editing note mute state.
  • Fixed: Changing note velocity could delete note when set close to 0%.

12.3.2

• All devices
  • Fixed: Track parameters were still shown when the plugin was deactivated
• Fire
  • Fixed: Pattern up/down button did trigger twice.
• Launchkey Mini Mk3
  • Fixed: Navigation with Shift+Track left / right was broken.
• Launchpad
  • Fixed: Exiting birds-eye view did also toggle session flip.
• Launchpad Pro Mk3
  • New: Fixed Length + Track buttons creates new clips of different lengths.
• Maschine (except Mikro)
  • New: Mk2: Step-left+Select: Toggle note edit (reload the template!).
  • New: Select + Pattern: Select the clip without starting it.
  • New: Select + Scene: Select the scene without starting it.
  • New: Select + Drum Pad: Select the drum without playing it.
• Push 1/2
  • New: Select+Pad in session mode displays the name of the selected clip (if it has one).

12.3.1

• All devices
  • New: Improved long press delay depending on system.
• APC, Fire, Maschine Jam, Maschine
  • New: Shift mode can be operated with one hand. Press and release the Shift button to activate shift mode. Execute Shift actions. Press Shift again to disable Shift mode. Button combinations can still be used as before.
• Generic Flexi
  • New: Improved labels of relative modes in selection box
  • Fixed: Speed of relative knobs in low-res CC mode was much too slow.
• Launchkey Mk3 / Launchkey Mini Mk3 / SL MkIII
  • New: In the step view of the drum sequencer change the note length or create long notes by pressing a note pad, keep it pressed, wait a bit and then press a pad right to it.
  • New: Longer notes are drawn in a different color.
• Maschine
  • Fixed: Changing note length in sequencers did not work.
  • Fixed: Tempo fractions were truncated.
• MCU
  • Fixed: Fixed a weird edge case when a device (specifically Korg nanokontrol 2) sends maximum speed for knobs.
• Remote SL Mk2
  • Fixed: Long notification messages were truncated

12.3.0

• Launchpad
  • Fixed: Poly aftertouch did not work.
• Maschine
  • New: Added support for Maschine Studio!
  • New: Shift+Mixer toggles the device panel.
  • New: Shift+Macro creates a new clip on the selected track and slot and starts playback (like Macro but without enabling overdub).
  • New: Improved simulator layout of Mk2.
  • Fixed: Rec+Group buttons did also execute the record action.
  • Fixed: Poly aftertouch did not work.
• Push
  • Fixed: Poly aftertouch did not work.

12.2.2

• Maschine+ / Mk3
  • New: Last touchstrip mode is remembered when switching between categories (Pitch, CC, Note Repeat).
  • Fixed: Mapping of user parameters did not work.
  • Fixed: Touchstrip did not update, reinstall the template!
• Novation SLMkIII
  • Fixed: Improved project left/right label.
• Push
  • Fixed: Color selection did trigger the pad release event on the previous grid mode.

12.2.1

• Maschine JAM
  • New: Swing button is lit when Groove is enabled.
  • Fixed: Velocity mode was shown on pressing perform, notes and tune but should not.
  • Fixed: Changing values with encoder and perform, notes and tune did not work.
  • Fixed: Cursor LEDs were not lit (requires installing the updated template!).

12.2.0

• All devices
  • Fixed: Switching between effect and track bank could leave the parameters unassigned in some cases.
  • Fixed: Settings were duplicated in the project dialog after a configuration dialog was opened.
• Akai Fire
  • New: Note editing mode is now de-/activated with Alt+Step or Alt+Drum (no more long pressing notes). After that select the note to edit by pressing it.
  • New: In note editing mode Alt+1st knob changes the pressure, Alt+2nd knob the timbre and Alt+4th knob the release velocity.
  • New: Metronome + Select knob: Change the play position.
  • New: Metronome + Shift + Select knob: Change the play position in small steps.
  • Fixed: Tracks could not be changed if the 16 tracks mode was active.
• Maschine JAM
  • New: Added new sequencers Drum 4, Drum 8, Poly and Raindrops (keep STEP pressed and use scene buttons).
  • New: Added new play modes Chords, Piano and Drum 64 (keep PAD MODE pressed and use scene buttons).
  • New: Lock enables the velocity setting. Keep lock pressed to show and change the velocity options.
  • New: Cursor keys respect the session flip state.
  • New: Cursor keys left/right change the layout in play view.
  • New: Cursor keys left/right change the selected page in sequencers.
  • New: Cursor keys up/down change the note range in sequencers and play modes.
  • New: Added option to dis-/enable to display clips of record enabled tracks in red.
  • New: Add option to turn off empty drum pads: if enabled the pad LEDs are off otherwise empty drum cells are displayed in gray.
  • New: Shift + AUX: Toggles between instrument/audio and effect tracks.
  • New: The selected sequencer or play mode is remembered when switching tracks.
  • Fixed: Blinking of pads was missing, therefore e.g. play state on grid was not visible.
• MCU
  • New: Added option to assignable buttons to toggle the motor faders on/off.

12.1.0

• Fire, Maschine, Push
  • New: Editing note pitch changes now in 0.1 steps independent of the knob speed setting.
• Maschine+
  • New: Now supported by DrivenByMoss! I still don't have one, so fingers crossed that it works.
• Maschine Mk2
  • New: Now supported by DrivenByMoss!
• Maschine Mikro Mk3
  • Fixed: Stop button did not emulate Shift button.

12.0.0

• Generic Flexi:
  • Fixed: Feedback of track mode was wrong.
• Maschine JAM
  • New: Now supported by DrivenByMoss!
• Maschine Mk3 / Maschine Mikro Mk3
  • New: Renamed template to DrivenByMoss.
  • New: Added option to configure record and shift+record in the settings.
• Maschine Mk3
  • New: The Shift button is working!
  • New: Group buttons display now the button combination state (solo/mute/rec arm).
  • New: Rec+Group button toggles rec arm.
  • New: Shift+Solo clears the Solo state on all tracks.
  • New: Shift+Mute clears the Mute state on all tracks.
• Kontrol Mk1
  • Fixed: Out of scale notes were lit.

11.8.0

• Requires Reaper 6.12+
• APC40, Kontrol MkI, Push
  • Fixed: Changing selection displayed None message.
• Launchpad
  • Fixed: Aftertouch was not working.
  • Fixed: First parameter fader column is now red again (had the same color as the 2nd column).
• Mackie HUI
  • New: Added support for up to 3 HUI devices. E.g. several Yamaha DM mixers use this.
  • New: Added setting to turn off sending the ping message.
  • Fixed: Jog Wheel direction was inverted.
  • Fixed: Master fader did not work.
• Mackie MCU
  • New: Track navigation can now be switched to hierarchical in the settings (requires restart). Press the select button again to enter a folder. Long press any of the select buttons to leave the folder.
• Maschine Mk3 / Mikro Mk3
  • Fixed: Aftertouch did not work. For the Maschine Mk3 also reload the template, which contained wrong notes for aftertouch!
• SL MkIII
  • Fixed: Added correct lookup names on Linux.

11.7.3

• Requires Reaper 6.12+
• All devices
  • New: Newly added tracks now get a color.
• APC40/mkII
  • Fixed: Switching track bank in session mode did leave session mode.
• Komplete Kontrol MkI
  • Fixed: Linux: Fixed USB access rights in rules file.
• Launchpad
  • Fixed: Incorrect and missing on-screen notifications when cursor buttons were used.
  • Fixed: LED state of scene scroll buttons was incorrect in scene mode.
  • Fixed: If temporary modes were used in session mode, session mode was left on button release.
• Push
  • New: Tracks added via the favorite menu now get the name of the plugin.

11.7.2

• Requires Reaper 6.12+
• Launchpad
  • Fixed: Fixed several issues introduced to the Shift view in 11.7.1.

11.7.1

• Requires Reaper 6.12+
• Launchpad
  • Fixed: Play button in shift view did not work.
• Komplete Kontrol MkI
  • Fixed: Linux: Added USB access rights to rules file and added installation instructions to the manual.

11.7.0

• Requires Reaper 6.12+
• Documentation
  • Clarified installation of the extensions which need to be added manually (Flexi, Auto Color, ...)
• Fire
  • New: Added VU meters to the channel and mixer mode.
  • New: In Mixer mode press Alt+Bank button to switch to a new display mode, which shows the volume, pan and sends of 16 tracks depending on the touched knob. Especially, helpful in the performance mix view. If playback is active and no knob is touched it shows the VU meter activity of all 16 tracks.
• Generic Flexi
  • New: Added support for 14-bit CC values.
  • Fixed: 0x80 as Note off was missing
  • Fixed: Feedback was not send for notes (only CC and pitchbend).
• Komplete Kontrol Mk2
  • Fixed: Shorten device and page names in parameter mode to prevent too long text.
• Launchpad
  • New: The loop area in the drum sequencer was shortened by 4 pads. These 4 pads can now be used in combination with the play area. From left to right they provide the following functions: select a drum pad without playing the sound, mute the drum pad, solo the drum pad, open the browser for the drum pad. With Reaper only selection is functional.
• MCU
  • New: Hold arrow left/right and turn the jog wheel to zoom in/out
  • New: Hold arrow up/down and turn the jog wheel to change the track height
• OSC
  • New: Added /track/{1-8}/duplicate to duplicate a track.
  • New: Added /track/{1-8}/clip/{1-8}/duplicate to duplicate the clip.
  • New: Added /device/duplicate to duplicate the device.
  • New: Added /scene/{1-8}/remove to remove/delete the scene.
  • New: Added /track/{1-8}/clip/{1-8}/create {beats} creates a new clip, activates overdub and starts it.
  • New: Added /clip/create {beats} creates a new clip, activates overdub and starts it.
• Push
  • New: Push 2: VUs of muted tracks are drawn in the mute-color.

11.6.1

• Requires Reaper 6.12+
• All devices
  • New: Added AU ARM devices to browser.
  • Fixed: AU devices were missing from location browser column.
• APC40/mkII
  • New: Select Session mode again when already in Session mode to dis-/activate birds-eye view, which allows to quickly navigate the session grid.
  • Fixed: MkI: All clips did blink not only the selected one.
  • Fixed: Cursor up/down was mixed up in the simulator.
• APCmini
  • Fixed: Selecting a mode did still send the pad up event to the new mode and e.g. started a clip in session mode.
  • Fixed: Selected mode was not always displayed correctly.
  • Fixed: Play/Stop did not work.
• Launchpad
  • Fixed: Drum 64 mode: Selected pads in the right bottom corner were lit in the left upper corner.
• Push
  • New: Added device types to favorite selection.
  • New: Added AU ARM devices to favorite selection.
  • Fixed: AU plugins were missing from favorite selection.
  • Fixed: Drum 64 mode: Selected pads in the right bottom corner were lit in the left upper corner.
  • Fixed: Clip parameters could not be slowly changed with Shift.

11.6.0

• Requires Reaper 6.12+
• New: Supports now Macos on ARM!
• All devices
  • Fixed: Removed dependency on SWS for duplicating clip content and deactivating track.
• APC40mkI/mkII
  • New: The selected clip in the session is now glowing white (mkII) or blinking yellow (mkI).
• Fire
  • New: The selected clip in the session is now blinking white (if not played back or recording).
• Generic Flexi
  • Fixed: Resolution for relative knobs was limited to 128 steps.
• Launchkey Mk3
  • New: Fader button is glowing if the track is selected.
  • New: Fader buttons are turned off if track does not exist.
• MCU
  • New: If Select Channel on Fader Touch is set to Off, touching the master fader is ignored as well.
• Push
  • New: Adding a track has now a menu which allows to add favorite devices. These favorites can be configured in the settings.
  • New: The selected clip in the session is now glowing white (if not played back or recording).

11.5.2

• Requires Reaper 6.12+
• APC40mkI/mkII
  • New: Press Stop Clip + Pad In Session Mode to delete the clip.
  • New: Press Select + Pad In Session Mode to duplicate the clip.
• Launchkey Mk3
  • New: Press Undo + Pad In Session Mode to delete the clip.
  • New: Scenes/Clips scroll now by 1 instead of 2, which is a bit less confusing.
• Launchpad
  • New: Temporary session mode: if any mode except session is active, hold the session button and then start a clip or scene. When the session button is released the previous mode is restored.
• Maschine
  • Fixed: Could not scroll browser results.
• MCU
  • New: The scaling of the VU meters is now in the range from -60 to +6dB like in the Reaper mixer display.

11.5.1

• Requires Reaper 6.12+
• All devices
  • New: Added 128 dummy drum channels to the drum pad bank. This allows e.g. to scroll now the rows of the drum sequencer of the Akai Fire.
  • Fixed: User parameters could not be changed.
• APC40
  • New: Knob LEDs are totally turned off if parameter does not exist.
• Fire
  • New: In Note Sequencer Shift + Grid buttons change the Scale, Shift + Alt + Grid buttons change the Scale Base key. For consistency the button combinations in Play and Piano modes are adjusted accordingly.
  • New: Use Shift + Select knob in note and Poly Sequencer mode to transpose notes of clip up/down.
  • Fixed: Channel parameters did not get reassigned when drum pad was changed.
  • Fixed: Selection got lost when scrolling too fast through drum pads in drum sequencer.
  • Fixed: Wrong parameter name was shown in combination with ALT button.
• Generic Flexi
  • New: Added functions to toggle user parameters between minimum and maximum value.
• Launchpad
  • Fixed: Tap tempo in Shift Mode did not work.
• Maschine Mk3 / Mikro Mk3
  • New: Channel and Polyaftertouch of the pads are now routed to Reaper.
• Push
  • Fixed: Device data on Info page was not displayed.

11.5.0

• Requires Reaper 6.12+
• Komplete Kontrol Mk2
  • New: Allow all MIDI channels for the keyboard, so far only channel 1 was enabled.
• Launchkey Mk3
  • New: Added support for models 25, 37, 49 and 61
• Launchkey Mini Mk3
  • Fixed: Session clip indication was no enabled.
  • Fixed: Improved contrast between selected and unselected scene.
  • Fixed: Long pressing a mode pad did crash.
• Launchpad
  • Fixed: Pro Mk3: Fixed Length button was missing in simulator.
• APC40, Fire, HUI, MCU, Kontrol MkI/MkII, SL MkIII
  • New: Double click the stop button when playback is stopped to move the play cursor to the end of the project.

11.0.0

• Requires Reaper 6.12+
• All devices
  • Fixed: 8th layout for scales which do not have 7 intervals was not aligned correctly (Push, Launchpad, APC).
• Launchpad
  • New: Press the 4th scene button (green) in the play mode to activate additional controls in the first pad row. First pad toggles sustain. Second and third pad are pitch down/up and the following pads switch to different intensities of the modulation wheel. You can slide these modulation wheel pads to imitate a modulation wheel.
  • New: Press the 5th scene button (amber) in the play mode to activate chords mode. This mode allows to play a chord by pressing a single pad. The base note is taken from the current scale and increases from left to right. The rows from bottom to top contain the following chords: Triads, Dyads (Power chords), Suspended second (Sus2), Suspended fourth (Sus4), Add sixth (6), Major seventh chord (maj7), Add ninth (9), Add eleventh (11). The same octave, scale and base note settings apply as with the play mode.
  • New: Pro Mk3: Fixed Length button triggers the New clip command.
  • New: The mode strip in session view is now displayed vertically if session is flipped (in the 8th column).
  • New: Show the flipped state in Bitwig when Session is activated from a different view.
  • New: Scrolling in Birdseye view is now per page.
  • Fixed: Birdseye view in session mode should not display mode button row.
• Push
  • New: Added chord mode. Press Note and select Chords to enable it or use the Layout button. Functionality is like described above for the launchpad.
  • Fixed: Push 2: Selected play view for a track was not remembered when changed via the Layout button.

10.9.6

• Requires Reaper 6.12+
• All devices
  • Fixed: Some configuration values were not initialized correctly after startup (e.g. LED brightness).
  • Fixed: Global settings were not stored when changed from the controller.
• APC40 MkI
  • Fixed: Drum sequencer crashed.
• Launchpad
  • New: First button in Shuffle view toggles now Shuffle grid.
  • Fixed: Shuffle view could not be closed.
• MCU
  • New: Toggle Use faders like knobs has been moved to the Flip button to be more consistent with the intended MCU behavior. Toggling instrument/audio and effect tracks is now on Shift+Flip.
• Midi Monitor
  • Fixed: Crashed on startup.
• OSC
  • Documented all OSC commands in the manual.
  • New: New command for send /clip/exists {0,1}
  • New: New command for send /clip/color with rgb(r,g,b); r,g,b = 0..255.
  • New: New command for receive /clip/{+,-}.
  • New: New command for receive /clip/launch.
  • New: New command for receive /clip/record.
  • New: New command for receive /clip/quantize.
• Push
  • Fixed: Pin button LED was lit in track details mode which is not supported with Reaper.

10.9.5

• Requires Reaper 6.12+
• All devices
  • Fixed: Naming of attributes in DrivenByMoss settings files could be wrong depending on the OS' language locale (e.g. Turkish locale), which could have some strange side effects like e.g. sequencers not working. If this is the case for your OS check the controller settings after the update.
• Fire
  • New: The brightness and the color intensity of the pads can be adjusted in the settings.
• Push
  • New: The Groove mode allows now to dis-/enable the arrange swing grid and set the amount.

10.9.4

• Requires Reaper 6.12+
• All devices
  • Fixed: Switched to TAR files for Linux and Macos to preserve the permissions of the Java runtime files.
• Launchkey Mini Mk3
  • New: Added options to choose the function for the record and shift+record button.
• Generic Flexi
  • New: Replaced Select/Export/Import buttons with Load/Save buttons.
  • Fixed: File dialogs did not work on Linux.
  • Fixed: Dialog height was jumping between two heights until it was manually adjusted.

10.9.3

• Requires Reaper 6.12+
• All devices
  • Fixed: First track was renamed to 'Track' when first loading a project after startup.
  • Fixed: Implemented a workaround for pitchbend messages on Linux.
  • Fixed: Crash when a clip without a take was on a track.
• Novation SL MkIII
  • New: Shift + Play toggles write automation.
• OSC
  • New: Added new command /track/{1-8}/remove
  • New: Added new command /device/remove
• Push 1/2
  • New: Improved the layout of the Groove mode.

10.9.2

• Requires Reaper 6.12+
• All devices
  • Fixed: Changed that resetting volume sets it to 0.0dB (was -5.6dB).
  • Fixed: Setting absolute faders controlled by CC was broken.
• MCU
  • Fixed: Scrolling in browser did always jump between first and last item.

10.9.1

• Requires Reaper 6.12+
• Macos
  • New: Library is now a universal binary for Apple Silicon / Intel. Which is currently of no use since there is no Reaper version and no JDK version available.
• APCmini
  • Fixed: Switching modes was broken.
• Beatstep
  • Fixed: Changing scale base note did only work in one direction.
• Fire
  • New: Activate delete mode and press the select knob to delete the currently selected device.
  • Fixed: Don't apply knob speed settings in Browser mode.
• Generic Flexi
  • New: Display parameter changes for Note Input functions.
  • New: Scale Note Input period and length to 127 for better use with absolute faders and knobs. If you assigned these to multiple buttons you need to update their values.
• Launchpad
  • Fixed: Duplicating notes in Poly Sequencer did create notes with velocity of 0 for all notes.
• Push
  • Fixed: Duplicating notes in Poly Sequencer did create notes with velocity of 0 for all notes.

10.9.0

• Requires Reaper 6.12+
• All devices
  • Fixed: Reduced compression of JDK to 1 (was 2) to prevent crash on some Windows 10 systems.
• Fire
  • New: In Shift mode the 10th button of the first row (blue) activates duplicate mode. Can be used with the first row of the Mix mode to duplicate tracks and with clips in the Session mode.
  • New: In Shift mode the 12th button of the first row (red) activates delete mode. Can be used with the first row of the Mix mode to delete tracks and with clips in the Session mode.
  • New: In Shift mode the 11th button of the first row (green) doubles the content of the currently selected clip.
• Midi Monitor
  • Fixed: Displayed note octave was wrong for Note on/off and Poly aftertouch (e.g. showed C6 instead of C4).
• MCU
  • New: Added User mode. Press Device button twice to activate user mode.
• OSC
  • New: Added /update before and after each update cycle (if there is at least 1 update message).
  • New: /track/{1-8}/name {text} - Set a new name for the track
  • New: Open Stage Control template: name of track can be set
  • New: Open Stage Control template: added data receive indicator LED to transport bar
• SL MkIII
  • Fixed: Light guide was only drawn black but not turned off on the hardware when disabled in the settings. The hardware light guide can now used again when the settings is disabled.

10.8.0

• Requires Reaper 6.12+
• All devices
  • New: Support for AU devices in browser on Macos.
  • Fixed: Resetting volumes sets them to 0dB (was -Inf) and pan to center (was full left).
• APC40
  • Fixed: Changing tempo in combination with Shift button left the shift mode active.
• Launchpad
  • Fixed: Crash when session mode was flipped and 8th row was active
  • Fixed: Session grid was off by 1 if 8th row was active and long press was used (also crashed on 1st row).
  • Fixed: Stop all clips button was missing in Shift mode on Pro models.
• Maschine Mk3
  • Fixed: Scene, pattern and fixed velocity with encoder knob did behave erroneous.
• MCU
  • Fixed: Page Up/Down (MCU MODE EQ / DYN) did not work.
• SL Mk I + II
  • New: Show all tracks in volume mode (no need to switch between instrument/audio tracks and master).
  • Fixed: Crash in sequencer/play mode.
• SL MkIII
  • New: Out of scale keys of the light guide can now also be lit in dark gray. Select Chromatic in the document settings.
  • Fixed: Switching modes did not work with single button presses.

10.7.4

• Requires Reaper 6.12+
• All devices
  • New: Support for absolute metronome volume changes (e.g. MCU). Relative changes do no longer require SWS to be installed (e.g. Push). The metronome volume text description is still not updated (always shows -6.0dB).
• APC40
  • Fixed: Coloring of Tempo mode in simulator was wrong.
• Fire
  • New: Added knob speed settings
  • Fixed: Note was always created with velocity of 0 in drum sequencer (except when Accent was enabled).
• OSC
  • Fixed: Changing bank size did not work.

10.7.3

• Requires Reaper 6.12+
• All devices
  • New: Windows 10: Updated to latest JDK15 nightly build, which should fix the startup crash on older Windows 10 installations.
  • New: Parameter mapped knobs/faders display their value in the simulator.
  • Fixed: Notification message display time was too short (since message was canceled straight away).
• APC40
  • New: Display Send index and name as well as user pages when changing to these modes.
  • Fixed: Crash when switching to effect tracks.
  • Fixed: Mk2: Do not switch to next Send when Send button was used in combination with track selection (to select Send N).
  • Fixed: Mk2: Last send mode was not remembered when changed with track selection combination.
• Launchpad
  • New: The behavior of duplicating a clip has changed. After selecting the source clip, press any free clip on the grid. The source clip will be duplicated at the end of the clips' track.
• Push
  • New: The behavior of duplicating a clip has changed. After selecting the source clip, press any free clip on the grid. The source clip will be duplicated at the end of the clips' track.
  • Fixed: Select button is now blocked in Browse mode since it does not have any function in that mode and left the extension with a blank screen when accidentally pressed.

10.7.2

• Requires Reaper 6.12+
• AutoColor
  • Fixed: Crashed on startup
• Komplete Kontrol
  • Fixed: Crashed on startup

10.7.1

• Requires Reaper 6.12+
• APC40 / APC40 mk2
  • New: APC40 mk2: Select user mode pages now with User+Select 1-8. Cursor keys change tracks like in pan and send mode.
  • Fixed: Pressing notes in drum sequencer for editing did always select notes in the first sequencer row.
• Launchpad Pro Mk3
  • Fixed: (Regression in 10.7) Mode selection did not always work
• Push 2
  • New: The 4th/8th send name is now always displayed if the current tracks are not inside of a group. Furthermore, it is displayed if the 8th knob is touched.

10.7.0

• Requires Reaper 6.12+
• NI Kontrol Mk 1
  • New: Added settings for knob speed
• NI Kontrol Mk 2
  • New: Knob speed settings are now from -100 to 100
• Launchpad
  • Fixed: Pro Mk3: The last selected play / sequencer mode was not restored
  • Fixed: Volume, Pan and Sends view was canceled when track selection changed.
  • Fixed: LED lighting of up/down buttons in scene and mix mode was wrong
• MCU
  • New: Added settings for knob speed
• NI Maschine Mk3
  • New: Added settings for knob speed
• OSC
  • Fixed: /vkb_midi/note/{0-127}/color did not send scale colors, only played notes
  • Fixed: Page size of user parameters was not changed (was always 8)
• Push 2
  • Fixed: Shutdown of the display process did not always exit cleanly

10.6.4

• Requires Reaper 6.12+
• Push
  • Fixed: Grid resolution could not be changed in drum modes

10.6.3

• Requires Reaper 6.12+
• All devices
  • Fixed: Raindrop sequencer did crash if more measures than 32 or 32 with 1/32t and 1/32 were used. The later issue is fixed and the first issue get blocked (only 32 measures get filled).
  • Fixed: Drum 4 / Drum 8 - setting note length on the grid was broken
• Akai Fire
  • New: Displays the number of the edit page when switching to the previous/next.
  • Fixed: Crash in browser when select knob was released.
• Launchpad
  • New: Updated documentation images
  • New: Added fixed accent option to the settings
  • New: Fixed accent can be toggled with the yellow pad in the right upper corner of the shift mode
• Push 2
  • Fixed: Long press delay was about double the time as with Push 1

10.6.2

• Requires Reaper 6.12+
• Akai Fire
  • New: Shift + Scene: Selects the scene without starting it.
  • New: Selecting or starting a scene shows its' name in the display.
• Launchpad
  • New: Display the track number and name on track selection.
  • New: Display the function of the selected row in Mix mode.
  • Fixed: Not all selected modes were displayed in Reaper and some names showed Session.
  • Fixed: Mix view was canceled when track selection changed.
  • Fixed: Long pressing a pad in a fader mode caused the selection of a track.
• Push
  • New: Note Repeat + Scene - Change note repeat period
  • New: Shift + Note Repeat + Scene - Change note repeat note length

10.6.1

• Requires Reaper 6.12+
• All devices
  • New: The crossfader controls the 1st track FX parameter on the master track.
  • Fixed: FX parameters (user parameters) on the master track could not be changed.
• Akai Fire
  • Fixed: Removed session flip option, which did crash.
  • Fixed: Also prevent deletion of note in sequencer when knob was touched but not turned.
• APC40MkII
  • New: Scene buttons are lit in the color of the scene (region).
• Komplete Kontrol MkI
  • Fixed: Interpretation of knob speed was wrong.

10.6.0

• Requires Reaper 6.12+
• APC40 / APC40MkII
  • Fixed: Insert device before / after current from Shift mode did crash.
  • Fixed: APC40: Shift+Stop All Clips did open the browser to insert before the device instead of replacing the current.
• Akai Fire
  • New: Alt + Stop - Toggle arranger automation write
• OSC
  • New: Added equalizer commands (uses first ReaEQ device on a track)
    • /eq/... - All values/commands available for /device
    • /eq/add - Add an ReaEQ device as the last device on the track
    • /eq/type/{1-8} - Set/get the band type (off, lowcut, lowshelf, bell, highcut, highshelf, notch)
    • /eq/freq/{1-8} - Set/get the frequency of the n-th band
    • /eq/gain/{1-8} - Set/get the gain of the n-th band
    • /eq/q/{1-8} - Set/get the q-factor of the n-th band
  • New: Added example Open Stage Control template for equalizer control

10.5.0

• Requires Reaper 6.12+
• APCMini
  • New: Long press a pad in session mode to select the clip without starting it.
• APC40 / APC40MkII
  • New: Long press a pad in session mode to select the clip without starting it.
  • New: Tempo is displayed on grid when tempo is changed
  • New: APC40: Tap Tempo + Cue Level changes tempo
  • Fixed: APC40: Shift+Stop All Clips did not open the browser
• Akai Fire
  • New: Long press a pad in session mode to select the clip without starting it.
  • Fixed: Drum sequencer crashed when changing note length on the grid
• Komplete Kontrol MkII, A-Series / M32
  • Fixed: Lookup of Komplete instance did not work.
• Launchpad
  • New: Long press a pad in session mode to select the clip without starting it.
  • Fixed: Modes could only be activated once (non-pro models)
• Novation SL MkIII
  • New: Long press a pad in session mode to select the clip without starting it.
  • New: The light guide displays the scale notes. The scale can be selected in the document settings.
  • New: The light guide can be turned off in the settings.
• Push
  • New: Long press a pad in session mode to select the clip without starting it.
  • Fixed: Exception when selecting a drum pad
  • Fixed: Temporarily activating session mode did only work for starting clips but not for starting scenes.
  • Fixed: Long pressing a pad in Drum 4 mode to edit the note did not work.
  • Fixed: Add Device/Effect did call Replace effect instead of Insert.

10.2.0

• Requires Reaper 6.12+
• All devices
  • New: All settings are now documented in the manual.
• Akai Fire
  • New: Pressing Select knob toggles the window of the current device.
• MCU
  • New: Footswitches and Functions keys can now execute an Action. Select Action from the list, then select the Action from the list below.
  • New: Option to disable Master VU (iCON extension)
  • Fixed: New function did not work
• OSC
  • New: Updated the Open Stage Control template for Open Stage Control 1.0.0. VU meters are now gray if track is muted.
  • New: /action/{1-8}/ to execute 8 different Actions.
  • Fixed: /automationWriteMode was broken
• Push
  • Fixed: Device and Parameter navigation was broken

10.1.0

• All devices
  • Fixed: Replaced a special # character (e.g. from Diatonic Transposer) with the normal ASCII #.
  • Fixed: Prevent to display identical on-screen messages
• APCmini
  • Fixed: Scene buttons were not lit
  • Fixed: Drum sequencer crashed
• Komplete Kontrol MkI
  • Fixed: Several crashes when activating Scale due to not configured colors
  • Fixed: Light guide did not work correctly when keyboard was transposed
• MCU
  • New: use faders as knobs and Marker mode functions display their state on the screen if toggled.
  • Fixed: Do not select tracks on fader touch if use faders as knobs is active.
• Maschine Mk3
  • New: Channel - Insert a new instrument channel (was File)
  • New: Stop + Channel - Insert a new audio channel
  • New: File - Saves the project (was Stop + File)
  • New: Page left / right moves to the previous/next clip on the selected track (moved the scene page before)
  • New: Stop + Page left / right moves to the previous/next clip page
  • New: Stop + Volume - Toggles VU meter display
  • New: Scale and Note Repeat settings are displayed and can be edited with knobs
• Mikro Mk3
  • New: In track and parameter selection modes the selected tracks/parameters blink.
• Maschine Mk3 / Mikro Mk3
  • New: Play mode is now accessed by pressing Keyboard. Press again for play configuration mode.
  • New: Drum mode is now accessed by pressing Pad Mode. Press again for drum configuration mode.
  • New: Activating Step provides a step sequencer for the currently selected drum machine cell or the last played note if Keyboard is active. Follow button provides grid resolution setting and page selection.
  • New: Chord button enables chords in play mode. Note of pad adds 2 thirds on top.
  • New: Stop + Rec - Start recording a clip in the currently selected (empty) slot
  • New: Sequential up is now the default play layout
  • New: Erase - Does no longer trigger Undo. Use Stop + Pad 1 instead.
  • New: To change bank pages turn the encoder and keep the related button pressed (scenes - Scene, clips - Pattern, tracks - Select, Solo or Mute))
  • New: In the parameter selection (Variation button) use the top row pads to switch devices and parameter pages. The parameter pads are now colored in the Bitwig parameter colors
  • New: Stop + Pad 1 (Undo) - Undo
  • New: Stop + Pad 2 (Redo) - Redo
  • New: Stop + Pad 5 (Quantize) - Quantize the selected MIDI 100%
  • New: Stop + Pad 6 (QUANTIZE 50%) - Quantize the selected MIDI 50%
  • New: Stop + Pad 9 (CLEAR) - Deletes all MIDI notes from the selected MIDI clip
  • New: Stop + Pad 13 (SEMITONE -) - Transpose the selected MIDI clip a semitone down
  • New: Stop + Pad 14 (SEMITONE +) - Transpose the selected MIDI clip a semitone up
  • New: Stop + Pad 15 (OCTAVE -) - Transpose the selected MIDI clip an octave down
  • New: Stop + Pad 16 (OCTAVE +) - Transpose the selected MIDI clip an octave up
  • New: Keep Fixed Vel pressed and turn the encoder to change the fixed accent value
  • New: Pressing Stop flushes the whole state (display / buttons) to the device. This helps when you switch to MIDI mode and the DAW state changed meanwhile, since there is no way to get the information that the user switches to MIDI mode.
  • New: Auto - Toggle write arranger automation.
  • New: Shift + Auto - Toggle write clip launcher automation.
  • New: Lock - Toggle arranger overdub.
  • New: Shift + Lock - Toggle clip launcher overdub.
  • Fixed: Sequential ^ and Sequential > scale layout were using 8 not 4 pads
  • Fixed: Auto and Lock buttons did not respect the setting "Flip arranger and clip record / automation"

10.0.0

• All devices
  • Fixed: MIDI arpeggiator got unnecessarily instantiated on project load even if Note Repeat was off
  • Fixed: Scrolling track bank by 1 was not implemented (e.g. MCU)
• The manual has now a known issues section
• New: Support for Akai Fire
• New: Support for Native Instruments Maschine Mk3
• Akai APC40 / APC40mkII
  • Fixed: User mode did not work
• Maschine Mikro
  • New: Show more on-screen notifications (Tap Tempo, Fixed Velocity, value change speed)
  • New: Stop + Pad Mode - Selects the previous base note of the scale.
  • New: Stop + Keyboard - Selects the next base note of the scale.
  • New: Stop + Chords - Selects the previous note layout.
  • New: Stop + Step - Selects the next note layout.
  • New: Stop + Plug-In - Toggle the window (if any) of the selected device (if any).
  • New: Sampling - Brings up the Slice to Drum Machine dialog.
  • New: Stop + Sampling - Bring up the Slice to Multi-sample dialog.
  • New: Auto - Toggle write arranger automation.
  • New: Stop + Auto - Toggle write clip launcher automation.
  • New: Lock - Toggle arranger overdub.
  • New: Stop + Lock - Toggle clip launcher overdub.
  • New: Stop + Projects - Save the project.
  • New: Tap - Tap Tempo
  • New: Stop + Tap - Toggle metronome
  • Fixed: FX and Master track were missing in Select, Solo and Mute modes
• Push 2
  • New: Increased text size of list elements
• SL MkIII
  • Fixed: Updated MIDI port lookup names on Macos

9.10

• Launchpad
  • New: Support for Launchpad Pro Mk3
  • New: Pads which show states in Shift mode are lit brighter when enabled (Play, Record, Metronome, ...)
  • New: Shift+Delete: Toggle Repeat (was Shift+Duplicate)
  • New: Shift+Duplicate: Doubles the clips content
  • New: Simulator layout is now closer to the specific Launchpad model
  • New: In Shift mode, cursor up or down enters the tempo mode. In Tempo mode you can change the tempo with the cursor keys.
  • New: In Shift mode, cursor left or right enters the shuffle mode. In Shuffle mode you can change the shuffle amount with the cursor keys.
  • New: Added record quantization setting (Shift+Quantize)
• Push
  • New: Drum sequencers use the colors of the drum pads of the drum machine device

9.02

• All devices
  • Fixed: reaper-jsfx.ini could not be loaded if it contained non UTF-8 characters
• Push
  • Fixed: Push 2: Message was flickering if no presets matched the filter in the browser

9.01

• All devices
  • Fixed: Crash when closing Reaper device configuration dialog with OK.
• MCU
  • Fixed: Selecting Mackie Extender did not work
  • Fixed: Touching multiple faders did not restore Pan mode on release.

9.00

• All devices
  • New: Added setting to hide deactivated tracks (tracks with lock state)
  • Fixed: Retrieval of track lock state (used for active state) was broken
  • Fixed: Potential crash on shutdown of Reaper
  • Fixed: Only add MIDI arpeggiator to track if Repeat is on (was added always if track was selected)
• Akai APC40 / APC40mkII
  • New: Keep a note pressed and use the mode knobs to change the parameters of the note (Sequencer + Drum mode)
  • Fixed: Changing sequencer resolutions with Clip Stop buttons did not work
• Launchpad
  • New: Added a new Mixmode. Press Shift+Session to enable it. This mode contains session modes at once. The rows from bottom to top are: rec arm, solo, mute, clip stop, send 2, send 1, panorama, volume. The panorama and sends pad are only colored for the selected track. Press one of the pads of the upper 4 rows to select a track. Select a volume, panorama or sends pad to activate it and then change its value with the virtual fader of the scene buttons.
  • New: Masterfader in Volume mode now has 4 steps per pad (like the other track faders)
  • New: In Pan mode the scene buttons control now the panorama of the master fader (to be consistent with volume mode)
  • New: Stop Clip buttons are now lit in red if pressed
  • Fixed: 8th row in Session mode was not drawn on startup
• Maschine Mikro Mk3
  • Fixed: Extension did crash on startup

8.98

• All devices
  • Fixed: Values of panorama envelope were flipped (left was right and vice versa)
  • Fixed: Document setting code must not be executed when extension is not running
  • Fixed: Fixed several issues on first startup (when DrivenByMoss is not yet added as control surface)

8.97

• All devices
  • New: Project/document specific settings (e.g. Scale or Note Repeat Settings) are now stored with the project.
  • New: There is now a dialog to edit project/document specific settings (click on the Project button or assign an Action key).
• Launchkey Mini Mk3
  • New: Display user pages when switching in user mode
• MCU
  • New: IMPORTANT: The device MIDI ports are now ordered left to right, which means if your main device is to the right, it needs to be the last!
  • New: You can configure for each of your MCU devices if it should act like the main device (e.g. enable transport controls; you can have multiple) and has now the option to support the specific Mackie extender protocol.
• OSC
  • New: The bank page size can be configured from 1-200.
• Push 2
  • New: Color settings are used in MIDI clip mode. Furthermore, always at least 4 rows are displayed.

8.96

• All devices
  • New: Included PDF manual
  • Fixed: Buttons in the Simulator UI which expect a specific CC value did not work
  • Fixed: Fader/knob touch states were not sent to Reaper
  • Fixed: Some texts were not displayed in the simulator
• APC40 MkII
  • New: Added user mode
• Launchpad
  • Fixed: Do not switch to play mode when changing tracks in Volume, Pan and Send modes.
• MCU
  • New: Option+Tempo/Ticks toggles between displaying the time or beats. Tempo/Ticks toggles the display of ticks/milliseconds or the current tempo for the last 3 digits. Both are also available in the settings.
  • Fixed: Fixed some issues with fader touch
• Novation SLMkIII
  • New: Added user mode. Long press the UP button and then 8th row button below the display. Page names are configurable in the settings.
• OSC
  • Fixed: /time/str now really sends the time (did send measures before)
• Push 1/2
  • New: Cancel notification message when changing modes
  • Fixed: Position now really shows the time (did display measures before)

8.95

• APC / APCmini
  • Fixed: Fixed a crash in Raindrop sequencer
• Generic Flexi
  • New: Added option to send the LED value even when command is received from the device.
• Komplete Kontrol Mk 1
  • Fixed: Modulation wheel did trigger button press of the main encoder
• Komplete Kontrol Mk 2
  • Fixed: Simulator view did not work
• Launchpad
  • New: Poly Sequencer: Currently played sequencer notes are also lit on the play area
  • Fixed: Note mode menu could not be called up from any drum mode
  • Fixed: Fixed a crash in Raindrop sequencer
• Mackie HUI:
  • Fixed: New command could not be triggered from footswitch
  • Fixed: Simulator GUI did not work
  • Fixed: DO not light LEDs for non-existing tracks
• Push 1/2
  • New: Poly Sequencer: Currently played sequencer notes are also lit on the play area
  • New: When Automation is turned off it is set to Trim/Read instead of Read.
  • Fixed: Shift+New did also activate Record but should not
  • Fixed: Fixed a crash in Raindrop sequencer
  • Fixed: Push 2: Clip Mode in midi grid layout did not show the notes

8.94

• All devices
  • Fixed: Creating sequencer notes was broken
• Generic Flexi
  • New: Commands to edit 64 user parameters (controls track FX parameters). See commands in new category User.
  • New: The MIDI channel for the keyboard (or pads if it is a pad controller) can be explicitly set (previously it was fixed to channel 1). It can also be turned off or set to all. If a MIDI note is mapped to a function on this MIDI channel, the note is blocked from being played. Note: If you have selected All for the channel the note is blocked on all channels!
  • New: Modulation Wheel (CC 01), Sustain Pedal (CC 64) and Pitchbend can now automatically be routed to Reaper. You can now turn them off individually if you want to map them to something else.
• Launchpad
  • New: Option to remove the master track from the track bank (requires restart of extension).
  • New: Pro: Disabled Delete button if used without button combination to prevent accidental deletions.
  • New: Pro: Added user mode (controls track FX parameters). Press USER button to enter. Scene buttons switch between the 8 pages of 8 parameters.
• OSC
  • New: Added user parameters (controls track FX parameters).
  • Fixed: Changing output server/port did still not work.
• Push 1/2
  • New: Added User mode (controls track FX parameters). Allows to map 64 parameters. Press USER button to enter. Setup on Push 1 is now Shift+USER.

8.93

• All devices
  • Fixed: Pressing OK button in configuration dialog removed the extension.

8.92

• All devices
  • New: Added version information to Windows DLL
  • Fixed: Temporary freezes of the Reaper UI with heavy CPU plugins with lots of parameters
  • Fixed: Shutdown was not fully completed after JVM was stopped.
• Launchpad
  • Fixed: Note selection was activated when coming from a non-note mode but should not.

8.91

• All devices
  • Fixed: Pitchbend and Modulation Wheels did not work.
• Generic Flexi
  • New: Improved handling of Program Change as source. For trigger commands also a button up is executed; for continuous commands the value of the PC is sent (and not always replaced with 127).
  • New: Patch Bank Selection, see Generic Flexi documentation for more info. But this is currently not that helpful with Reaper since all settings are global.
• Launchpad
  • New: Easier selection of note modes. Pressing the note button brings up a menu where you can directly select the note/sequencer mode. First row (from top) selects play modes, 3rd row drum modes and 5th row sequencer modes.
  • New: Changing note length does now also work in Poly Sequencer
  • New: Inverted back the clip/scene scroll direction (was also not conform with the LED lighting)
  • Fixed: Displaying longer notes did not work in Poly Sequencer
• Maschine Mikro 3
  • Fixed: Removed restriction that drum octave could only be changed if a clip was active.
• MCU
  • New: Group/Write Automation changed to trigger Latch automation
  • New: Support for Read/Trim automation mode
• Push 1/2
  • New: Support for Read/Trim and Latch Preview automation modes
  • New: Inverted back the clip/scene scroll direction
  • New: Changing note length does now also work in Poly Sequencer
  • Fixed: Displaying longer notes did not work in Poly Sequencer

8.80

• All devices
  • New: The project start time, which can be configured in the project settings, is now added to the displayed time.
  • Fixed: jna-platform.jar file was missing. E.g. caused the file dialog in the Generic Flexi to crash.
  • Fixed: Blinking pads in simulator UI did not work
  • Fixed: Mapping of CC commands to specific values was broken. Mainly affected Kontrol keyboards.
  • Fixed: Scene/clip scrolling LEDs not indicated correctly. Session birds eye view navigation did not work.
• Akai APCmini
  • New: Change note length or create long notes in the Sequencers (Note, Drum) by pressing a note pad and then a pad right of it.
• Akai APC40 / APC40mkII
  • New: Change note length or create long notes in the Sequencers (Note, Drum) by pressing a note pad and then a pad right of it.
  • New: Improved scrolling of browser columns
  • Fixed: Browser crashed when activated
• Generic Flexi
  • New: Added new function: Clip: Quantize
  • New: Added functions for note repeat
  • New: Added functions for transposing the keyboard
  • Fixed: Configured knob speed settings were not set on startup
• Komplete Kontrol A-Series / M32
  • Fixed: Configured knob speed settings were not set on startup
  • Fixed: Crashes when scrolling clip page
• Launchpad
  • New: Virtual faders support 4 velocity steps (on all models)
  • New: Activates hardware play mode again when extension is stopped
  • New: Change note length or create long notes in the Sequencers (Note, Drum, Drum 4, Drum 8) by pressing a note pad and then a pad right of it.
  • New: Launchpad Pro: Duplicate notes in Drum 4 and Drum 8 sequencers
  • Fixed: Color of front LED was wrong when mode was changed
  • Fixed: Cursor left was not lit correctly in Drum 4 and Drum 8 mode
• Push 1/2
  • New: Change note length or create long notes in the Sequencers (Note, Drum, Drum 4, Drum 8) by pressing a note pad and then a pad right of it.
  • Fixed: Master mode only showed up shortly when Master volume knob was touched
  • Fixed: Configured knob speed settings were not set on startup

8.70

• All devices
  • New: Stop (or toggle playback) also disables record
  • New: Improved auto detect: Do not add a device if one of the midi ins/outs is already in use. Refresh midi devices before executing the auto detect.
  • New: Configuration window is now a top level window
  • New: Added simulator window for each device
  • Fixed: Some LEDs did not update correctly
  • Fixed: Duplicating media items from the session view did always duplicate the selected media items.
• Beatstep
  • New: Easier switching between note selection and step editing in sequencers. Turning knob left selects play/note select, turning it right selects step editing.
  • Fixed: Value change on some knobs were flipped (e.g. scrolling browser).
  • Fixed: The Note Sequencer used the drum mapping and octave shifting.
  • Fixed: Pads sometimes lit with wrong color after pad was pressed
  • Fixed: Pads sometimes lit with wrong color after leaving Shift mode
  • Fixed: Browser mode was canceled when Shift was released
• Push 1/2
  • Fixed: Filter active sensing warnings from log console
  • Fixed: Push 1: Frame mode showed an empty display
• Launchpad:
  • New: Non-Pro models: Pressing the Delete and Duplicate pads in shift mode activates the related mode. Leaving the shift mode and entering session mode allows then to delete/duplicate clips and tracks. After deleting/duplicating an item the delete/duplicate mode is turned off.
  • New: Turn of panorama lights for non-existing tracks, instead of showing them centered
  • Fixed: Launchpad X was not correctly using the velocity faders
  • Fixed: Fader scaling was wrong (except Launchpad Pro)
• Komplete Kontrol A-Series / S-Series Mk2 / M32
  • Fixed: Some buttons did not work (Quantize, Metro, Undo)
• MCU
  • Fixed: Record button was not always lit correctly
• Push 2
  • New: Added duplicating notes in Note, Drum, Drum 4 and Drum 8 sequencers. Keep Duplicate button pressed, select the source note, press empty destination pad(s). The note will be copied with all settings.
  • New: Tempo and Position knobs only show their value as a popup notification. The metronome settings can now be accessed by long-pressing the Metronome button. Note: play position text is only updated when playback is active!
  • Fixed: Layout of Touchstrip mode was not updated to new features on Push 1
  • Fixed: Play view was not active on a newly added track
• SL MkIII
  • Fixed: Crash when selecting track again to enter device mode

8.60

• All devices
  • New: Color drum pads in the tracks color
• AutoColor
  • Fixed: Crashed on startup
• Launchpad
  • New: Drum 4 and Drum 8 Sequencers: draw longer notes in darker color
• Mackie MCU
  • New: Added an explicit setting for devices with only 1 channel ("Has only 1 fader"), e.g. the Behringer X-Touch One. For devices with the normal 8 channels the select button now works again in marker and device mode.
  • New: Send button states for function keys (F1-F5) which turns on the LED if the device has one and supports it (e.g. Behringer X-Touch One).
  • New: Knob LEDs in device mode show only one dot
  • Fixed: Knob speed was too slow
  • Fixed: Knob LEDs were off when panorama was fully left
• Maschine Mikro Mk3
  • Include Bitwig template as Template (Bitwig.ncmm3) again, not the full Memory dump (Bitwig.ncc).
  • You need to load this new template into the Maschine (Bitwig.ncmm3) first (due to changes to the Touchstrip settings).
  • New: Change note repeat period and length via ribbon (MOD: CC1, CC11; PERFORM: Master Volume; NOTES: Note Repeat Period / Length)
  • New: The touchstrip LEDs are updated matching the selected mode.
  • New: Pitchbend modes of touchstrip return to zero setting when finger is released.
  • New: Flipped direction of Pitchbend Down Mode of touchstrip to match the LEDs.
  • New: Added setting "Action for pressing rec armed empty clip"
  • New: Erase+pad deletes scene, clip, track (depending on the selected mode)
  • New: Duplicate+pad duplicates scene, clip, track (depending on the selected mode)
  • New: Browser+pad in Clip Mode opens the browser to load a clip
  • New: Stop+pad in Clip Mode stops the clip. Clips queued to be stopped are now lit in dark green
• Native Instruments Kontrol 1
  • Fixed: Did crash when there was not track in the project
• Push 1/2
  • New: Long press notes in Drum, Drum 4 and Drum 8 Sequencers to edit it.
  • New: Drum 4 and Drum 8 Sequencers: draw longer notes in darker color
  • New: Slow down value changes in note repeat mode
  • New: Change note repeat period and length via ribbon
  • Fixed: Fixed Length button was lit when volume mode was active

8.51

• All devices
  • Fixed: Log output was not visible on startup.
  • Removed support for Arturia Beatstep Pro due to too much limitations (use Generic Flexi instead).
• APC40
  • New: Changed direction of session-clip/scene scrolling
• Mackie HUI
  • New: Added support for icon Master fader extension
  • New: Insert buttons select track
  • New: Added (HUI QICK PUNCH) - Toggle Punch In
  • New: Added (HUI IN) - Toggle Punch In
  • New: Added (HUI OUT) - Toggle Punch Out
  • New: Added (HUI ON LINE) - Toggle Audio Engine on/off for current project
  • New: Added (HUI RETURN TO ZERO) - Return the play cursor to the start of the arranger
  • New: Improved unmute/unsolo all tracks
• Native Instruments Kontrol 1
  • New: Improved speed of knobs
  • New: Changed direction of session-clip/scene scrolling
• Launchpad
  • New: Added Poly Sequencer
  • New: Delete + Scene button in Session view deletes the scene
  • New: Shift mode: Enable note repeat and set the note repeat period and length with the pads in the middle
  • New: Sends mode: Display name of sends when selected
  • New: Light buttons brighter when pressed
  • New: Flipped Up/Down button in Device mode
  • New: Changed direction of session-clip/scene scrolling
  • New: Added notification messages to Shift view
  • New: Used several colors in Shift view for easier function identification
  • Fixed: Duplicate did not work on non-pro models
• Maschine Mikro Mk3
  • You need to load the new template into the Maschine (Bitwig.ncc) first
  • New: Use multiple colors on pads
  • New: Added note repeat (long press note view to change settings)
  • New: Pressing the encoder button always toggles between slow/fast value change, except tempo (tap tempo) and browser mode (confirm selection)
• OSC
  • New: Added commands for note repeat (/vkb_midi/noterepeat/...)
  • New: Added /track/hasParent {0,1}
• Push 1/2
  • New: Delete + Scene button (in Play, Piano, Drum 64, Session view): Delete the scene
  • New: Delete + pad in scene play mode: Delete the scene
  • New: The quantize mode now contains the record quantization configuration as well
  • New: The note insert/edit MIDI channel can be selected in the Track Details mode and in the document settings
  • New: Buttons are lit brighter when pressed
  • New: Changed direction of session-clip/scene scrolling
  • New: Scrolling scenes in scene play view scrolls whole 64 scenes
  • Fixed: Push 1: Header text in Master mode was missing
• SL MkIII
  • New: Changed direction of session-clip/scene scrolling

8.40

• New: Do not display note feedback from muted media items
• New: Switched to "MIDI Arpeggiator" instead of "MIDI Note Repeater" for Note Repeat. This requires a fix on the MIDI Arpeggiator JS plugin to make the note length work: Increase the note length step resolution from 0.1 to 0.001 like this: slider2:1<0.01,1,0.001>Note Length
• New: Support for Novation Launchpad X
• New: Support for Novation Launchpad Mini Mk3
• Fixed: Controller instance was not stopped when deactivated
• Launchpad
  • New: Shift mode: Enable note repeat and set the note repeat period and length with the pads in the middle
• Maschine Mikro Mk3
  • New: Added note repeat settings
• OSC
  • New: Added commands for note repeat
• Push 1/2
  • New: Added note repeat, long press Repeat button for configuration settings
  • New: The note insert/edit MIDI channel can be selected in the Track Details mode and in the document settings

8.30

• New: Speed up browsing filter columns
• Fixed: Last item in a browser filter column could not be selected.
• Support for Novation Launchkey Mini Mk3
• Launchpad MkII
  • Fixed: The Play and New functions in Shift mode were switched.
  • Fixed: Sequencers were not available
• MCU
  • Fixed: Do not set pan mode on fader touch release when volume mode was active before.
• OSC
  • Fixed: OSC did crash on startup
  • Fixed: Calls to /track/x/clip did not work

8.21

• Fixed: Endless recursion when accessing clips

8.20

• New: Improved auto-detect of some devices. Added CoreMidi4J prefix support on Macos.
• Ableton Push
  • New: Added info to the browser mode about if insert or replace is happening and selected track.
  • New: Added aftertouch processing to Drum and Drum 64 mode.
  • Fixed: Blinking on queued clips did not work
• Launchpad Pro/MkII
  • New: All tracks are displayed (incl. FX and master track)
  • New: Shift-mode can now also be accessed from the Session mode. To access the Bird-Eye view of the Session mode long press the Session button.
  • New: Optimized Shift-mode, Scene buttons select (again) the Mix-mode of MkII, they have no function on the Pro. First row of buttons select the length of new clips on both models.
  • New: Sequencers are now available.
  • New: Pro: Added aftertouch processing to Drum and Drum 64 mode.
  • Fixed: Blinking on queued clips did not work
  • Fixed: Page Left LED indication in Note and Raindrops Sequencer was not correct.
  • Fixed: Play in Shift mode of MkII did not work (triggered toggle loop instead).
  • Fixed: Mixer-LED on MkII was not lit.
  • Fixed: Play-Layout was not set when first time switching between Session and Play.
  • Fixed: Stop-Clip mode could not be activated on MkII
• Maschine Mikro MkIII
  • New: Show info text when Duplicate is enabled
  • New: Added template with required settings to the resources folder.
  • New: Added flip arranger and clip recording option
• MCU
  • New: Added preset for Behringer X-Touch One
  • New: If device or marker mode is active, do not change track with MCU_SELECT (necessary for 1 channel controllers like Behringer X-Touch One)
• Native Instruments Komplete S-MkII, A-series/M32
  • New: You can now set the speed of the knobs in the settings.

8.11

• All devices
  • New: Detect button for auto-detecting connected devices.
  • New: Many performance improvements: Some updates were put on a slower thread, track chunk only is read and analyzed if playback is stopped, GUI only gets created if dialog is opened, ...
  • Fixed: Layout of Debug dialog
• MCU
  • New: Added new function key option "Toggle use faders like editing knobs".
• Native Instruments Komplete S-MkII, A-series/M32
  • Fixed: Definition files were mixed up and therefore the devices did not work properly
• Push 2
  • Fixed: Display preview window did not update and window layout was wrong

8.10

• All devices
  • New: Added new scales
  • New: Added a Debug dialog where you can test to deactivate update routines
  • Fixed: Creating clips did not start recording.
  • Fixed: Send values were always sent for Send 1.
  • Fixed: Only use send envelopes when active
• APCmini
  • Fixed: Sometimes the pad grid was not drawn after startup, since the APCmini is slow to be ready for receiving commands.
• APC40mkI/mkII, APCmini, Launchpad MkII/Pro, Novation SL, Push
  • Fixed: Deactivate all sequencers if no clip is selected. This caused weird effects if the grid resolution of the sequencer was changed with no clip selected and then a clip was selected.
• Beatstep Pro
  • Fixed: Some knobs did not toggle its value
• Mackie HUI
  • Fixed: Crash on startup and shutdown if Display was active
• Native Instruments Komplete S-MkII, A-series/M32
  • New: The extension is now split up into two. One for the S-series and one for the A-series/M32. You need to add your Kontrol device again.
• Novation SL MkIII
  • New: Notification messages are also displayed on the SL display
  • New: Firmware version is displayed on startup
• OSC
  • New: /playbutton - Toggles playback, you can configure the Stop behavior in the configuration settings
  • Fixed: All /vkb_midi commands did crash
• Push
  • Fixed: Display a message if no clip is selected in clip mode
  • Fixed: Octave buttons were not updated in sequencer modes.

8.00

• All devices
  • Fixed: Changing track selection did not correctly adjust the track bank page on the device (except Push)
• Komplete Kontrol A-Series / M32
  • Fixed: Track name was not displayed
• Novation Remote SL MkIII
  • New: Added setting to disable the faders (to prevent accidentally changing volume)
• Push 1/2
  • New: Changed layout of Repeat configuration settings (long press Repeat button)
  • New: Changed the layout of the quantize/groove mode
  • New: Implemented editing of note parameters: length and velocity
  • New: Session: The octave and page buttons navigate the pages of the session grid
  • New: Push 1: Show longer track/layer names in Details mode
  • New: Push 1: Indicate volume with one bar when VU is active
  • New: Push 2: Improved layout of transport mode
  • New: Push 2: Only redraw display image if something has changed
  • Fixed: Stepping out of track folders did skip a level
  • Fixed: Do not close transport mode when accidentally tempo or position knob is touched.
  • Fixed: Push 1: Groove mode crashed
  • Fixed: Push 1: Layout of panorama on max right
  • Fixed: Push 1: Send modes could not be accessed
  • Fixed: Push 2: Notification messages were not shown on the display

7.05

• Generic Flexi:
  • New: Commands to set Solo, Mute, Rec Arm, Monitor and Auto Monitor (in addition to toggle).
• Launchpad MkII
  • Fixed: Blinking of playing clips did not work
• Push 1
  • Fixed: Do not send color palette request, which is only working for Push 2

7.04

• All devices
  • New: Note feedback is implemented. Playing notes from MIDI clips are shown in play and drum views.
  • Fixed: Parameter updates are only slowed down if automation writing is enabled
  • Fixed: Setting automation mode sometimes addressed the wrong track
• Ableton Push 2
  • Fixed: Improved stability writing the color palette
• Komplete Kontrol MkII
  • New: Added Send mode (CLEAR button to toggle). Edit all sends of the selected channel.
  • New: Add track number to mixer view channels
  • New: Added Recording Option: Toggle Rec Arm State of selected track
  • New: Now, first checks if the selected device on the selected channel is a Komplete Kontrol device, if not the first instrument device is checked. This way you can edit multiple Komplete Kontrol instances on a channel.

7.03

• All devices
  • New: Reflect automation changes on device (Volume, Pan, Mute, Send Volume)
  • New: Support for displaying and setting the color of the master track.
  • New: Support for Automation modes on master track.
  • Fixed: Writing Automation did not always work
• Ableton Push 2
  • New: Set a new color palette for the pad LEDs and improved the algorithm to calculate the closest available color.
  • Fixed: The default note view is set to Play again, was Drum View.
• APC40
  • Fixed: All views except Play View were drawn wrong.
• Komplete Kontrol MkII
  • New: Added a parameter/device mode (CLEAR button to toggle)!
• Maschine Mikro MkIII
  • Fixed: Display warning when no device is selected in parameter mode
  • Fixed: Indicate non-existing parameters as "None" in parameter mode
• MCU
  • Fixed: Jogwheel jumped back one step after movement ended
• Novation Remote SL MkIII
  • Fixed: Drawing of track and device modes were wrong when no track was selected (2nd try).
  • Fixed: Another crash in the browser.
• OSC
  • Fixed: Open Stage Control template produced a crash if the master volume was changed.

7.02

• Novation Remote SL MkII
  • Fixed: Drum pads did not work
  • Fixed: Crash displaying send and master track
• Novation Remote SL MkIII
  • New: The browser result name is now shown in two columns
  • Fixed: Drawing of track modes were wrong when no track was selected
  • Fixed: Track could not be added when no track was selected
  • Fixed: Browser mode could crash if a non-existing filter column was selected
  • Fixed: Button long press events caused unnecessary warnings in the log
  • Fixed: Keyboard did not work
  • Fixed: Implemented a workaround for button LEDs being lit when knob or fader values were changed on Windows (bug with MIDI Sysex in JDK).
• OSC
  • New: Added layer tab to Open Stage Control template.
  • New: Added sending of /device/layer/selected/{attributes}
  • Fixed: Some types used "selected" and some "select". Both can be used now.
  • Fixed: Fixed location of master track in Open Stage Control template for 0.47.1.
• New: Updated to OpenJdk 11.0.3+7
• New: Faster calculation of browser results
• Fixed: Navigating parameter pages with cursor keys did not work
• Fixed: flush was still called when a device was set to be deactivated

7.01

• Fixed: Reaper INI was not read on Linux.
• Arturia Beatstep
  • Fixed: Caught exception when pads are transposed. Now an error is printed to the console.
• Generic Flexi
  • Fixed: MMC commands with device IDs > 15 did not work.
• Novation SL MkIII
  • New: Route all 16 MIDI channels to Reaper (not only channel 1)

7.0

• New: Added support for Novation SL MkIII
• Fixed: scrolling of parameter pages by page bank did not work (e.g. Shift + cursor left/right on Push)
• Ableton Push 2
  • New: Deactivated channels and layers are drawn in dark colors
• Komplete Kontrol Mk II / A-series / M32
  • New: Light record button as well on clip recording and clip overdub

6.4

• Generic Flexi
  • New: The speed (fast and slow) for relative knob changes can be configured
  • New: A command can be assigned to be the Shift button (Global: Shift Button), which gives extra functionality if combined with another control (e.g. Play, Rewind, Forward and Knob Speeds).
• Komplete Kontrol
  • New: Mapping of first Komplete Kontrol parameter is no longer necessary
  • New: Improved automatic lookup
• Changed storing of Reaper settings to prevent corruption of INI file.

6.3

• Generic Flexi
  • New: Added setting to store the last selected mode
  • New: MIDI CC is now available as a function destination
• Komplete Kontrol
  • New: Added setting to flip the track/clip navigation of the encoder knob
  • New: Added setting to flip the clip and scene navigation of the encoder knob
  • New: Added setting to set the length of new clips
  • New: Added setting to set the behavior on transport stop
  • New: Added M32 to the extension name
• Fixed: Navigation from and to master track was reversed.

6.2

• APC40
  • New: Shift mode stays active until you release the Shift key.
  • Fixed: Clip indicator was not displayed.
• Launchpad Pro
  • Improved 2 colors.
• Komplete Kontrol
  • Fixed: Record option "Record clip" did not start recording when transport was stopped.
• Midi Monitor
  • New: Log system realtime events
  • New: Setting to filter system realtime events
• Push 1/2
  • New: You can now tweak the speed of the knobs in the settings (Workflow -> Knob Speed Normal / Knob Speed Slow)
• Fixed: Did crash Reaper on startup if UserPlugins folder was located in a path with non-ASCII characters.

6.1

• Generic Flexi
  • Fixed: Exception when Send volume was mapped/changed and a FX or the Master track was selected.
• Komplete Kontrol
  • New: Added information about mute state due to soloed track(s)
  • New: Added more selected track information to confirm to updated protocol
  • New: Added scene navigation and play
  • New: Slowed down knob change rate on MkII
• OSC
  • New: You can now configure the value range. So far, this was 128. Now you can increase the range to 1024 or 16384. Note that you also need to configure the widgets in your OSC client accordingly.
• Fixed: NullPointerException on hierarchical track navigation
• Fixed: A Jar file was missing in the 6.0 release.
• Fixed: Toggling Note Repeat did not work

6.0

• Generic Flexi
  • New: Use native dialog for selecting the configuration file.
  • Fixed: Fixed a typo (CC40 was named CC30).
• Komplete Kontrol
  • Switched to new MIDI protocol
  • Support for A-series and M32
• Mackie HUI
  • Support added
• Mackie MCU
  • Fixed: Knob LED was not turned off on non-existing tracks for panorama mode.
• OSC
  • Fixed: Reduced the size of a OSC bundles to stay below 64 Kb, which is the maximum for an UDP packet.
• Push
  • Automation could not be activated if an effect track or the master track was selected.

5.91

• OSC
  • Fixed: Reduced the size of a OSC bundles to stay below 64 Kb, which is the maximum for an UDP packet.

5.90

• Beatstep
  • Fixed: Track and Device mode selection did not work.
• Maschine Mikro Mk3
  • Fixed: Pan and Send modes could not be switched.
• MCU
  • Display mode names for Track, Volume and Sends. Send modes also display the name of the send.
  • You can flip backwards through the send modes with Shift+Send.

5.80

• Launchpad
  • Fixed: Switching of Note and Sequencer did not work (only if also Push 1/2 was running)

5.70

• Launchpad
  • New: The Bootloader and Firmware version is now logged to the console
  • New: Pro: The user button acts now like the Shift button
• MCU
  • New: Option + one of the Mute buttons: Deactivate all mutes
  • New: Option + one of the Solo buttons: Deactivate all solos
• Push 1/2
  • New: Select + Mute: Deactivate all mutes
  • New: Select + Solo: Deactivate all solos

5.60

• MCU
  • Fixed: Removed unnescessary clip indication.
• Midi Monitor
  • Fixed: System Exclusive formatting was wrong.
  • Fixed: Check for MMC was wrong.
• OSC
  • Fixed: Track selection did not work when using only "select" and/or did not set 1 as parameter.
  • Fixed: Decimal changes of tempo did not work.
  • Fixed: /device/layer/{1-8}/send/{1-8}/volume and /device/layer/{1-8}/send/{1-8}/volume/touched

5.50

• New: Integrated DrivenByMoss 5.5
  • New: There is now only one version number, the number of DrivenByMoss, and one changes file in the Wiki.
  • New: Extension Midi Monitor added
  • Fixed: Scene navigation with cursors was broken on most devices
  • Ableton Push / Push 2 11.04
    • Fixed: Clip indication was broken

5.30

• New: Integrated DrivenByMoss 5.30
  • Added new Midi Monitor extension.
  • Renamed Utilities extension to Auto Color
• Fixed: Removed stretching of dialog configuration widgets when only a view elements are present.

5.20

• New: Integrated DrivenByMoss 5.20
  • Ableton Push / Push 2 11.04
    • New: Use Shift+Octave Up/Down in Drum Sequencer modes to move the pads by 4.
    • Fixed: Marker mode was broken.
  • Akai APC40 / APC40mkII 5.20
    • New: Changed Nudge- to Undo and Nudge+ to Redo.
    • New: Flipped functionality of "Detail View" (is now "Toggle plugin window") and Shift+"Details View" (is now "Step through the layout perspectives").
    • New: Drum sequencer: The highlighted grid in the drum machine now only show the 12 pads. The scene buttons 1/2 move the pad view by 4. The scene buttons 4/5 move the pad view by 12 (previously 16).
    • Fixed: "Step through the layout perspectives" did not work on some display profiles.
  • Generic Flexi 2.2
    • New: Added commands to control Browser filter columns 7 and 8.
    • New: Added Browser mode.
    • New: Added absolute mode for toggle buttons.
    • New: Added support for MMC.
    • New: Added "Transport: Rewind" and "Transport: Fast Forward"
    • New: Select buttons in Parameter mode select parameter pages instead of devices.
    • Fixed: Removed duplicated function "Transport: Set Crossfader", use "Master: Crossfader" instead.
    • Fixed: Mode knobs did always use relative mode 1, even if 2 or 3 was selected.
    • Fixed: Values of Track-, Volume- and Parameter mode were not reflected correctly back to the device.
    • Fixed: Prevent console warnings when values go out of bounds in relative modes.
• New: Added an action to open the DrivenByMoss extension window (search for "DrivenByMoss" in the action list).
• New: The DrivenByMoss extension and configuration windows can now be closed with the Escape key.

5.10

• New: Integrated DrivenByMoss 5.10
  • Native Instruments Komplete Kontrol 1 S25, S49, S61, S88 1.1
    • New: Improved displayed scale colors. Only the root note is now displayed in the track color. All other notes are colored in white. Played note are in green or red if recording. Furthermore, sequenced notes are also displayed in green.
    • New: If a track with a drum device is selected the keyboard LEDs display the according slot colors.
    • New: Keyboard range is displayed on screen and display if changed.
    • New: SHIFT+BACK - Toggles monitor on the selected track.
    • New: SHIFT+ENTER - Toggles rec arm on the selected track.
  • Generic Flexi 2.1
    • New: Added command: "Device: Parameters"
  • Generic Utilities 1.0 added (AutoColor)
• New: Controllers can be deactivated so they do not use any resources when they are not connected.
• New: Speed up of Java/C++ communication; fixes lag of controller playing
• New: Menu for adding controllers is now hierarchical
• New: Improved folder navigation
• New: Implemented sending of Escape and Enter key to Reaper (used by MCU protocol, only Windows & macOS)
• New: Implemented transport restart function (used by Generic Flexi and OSC)
• Fixed: Toggling of plugin window did not work
• Fixed: MIDI editor is no longer closing when executing quantize from a controller, if it was already open.

5.021

• Fixed: Widgets in configuration dialog did not always update their values correctly.
• Fixed: The integrated Java VM did not contain the accessibility module. Therefore, DrivenByMoss crashed on system with enabled accessibility support.

5.01

• Fixed: "error -99" on Macos with Push 2.
• Fixed: NullPointerException in Color Picker, if Cancel is selected.

5.00

• Integrated DrivenByMoss 5.0
  • Open Sound Control (OSC) protocol - 6.12
    • Fixed: Potential synchronization issue when sending OSC messages.
  • Generic Flexi - 2.0
    • New: Completely new settings user interface
    • New: Support for modes: Track, Volume, Panorama, Send 1-8, Parameters
    • New: Support for using Pitchbend as a controller
    • New: Added command: "Master: Crossfader"
    • Fixed: Blocking notes which are mapped to a command did only work after restart.
    • Fixed: "Send value to device" did always send on midi channel 1.
• Bundled Java Virtual Machine for easier installation

4.03

• Integrated DrivenByMoss 4.03
  • Ableton Push / Push 2 - 11.03
    • Fixed: Fixed resetting of Push 2 display colors.
  • Novation Launchpad Pro & MkII - 3.45
    • Fixed: Transposing the piano view was broken
• Fixed: New tracks with no name did sometimes not turn up until given a name

4.02

• Integrated DrivenByMoss 4.02
  • Ableton Push / Push 2 11.02
    • New: Mute and Solo work now in all modes (not only in track modes).
    • Fixed: Fixed a crash in the Browser.
• Fixed: The track for setting the automation mode was off by 1.
• Fixed: Komplete Kontrol 2 plugin browsing and selection works now.

4.01

• Integrated DrivenByMoss 4.01
  • Ableton Push / Push 2 11.01
    • New: Push 2: You can now use Delete+Touch knob in the Setup mode to reset the values to its default.
  • Open Sound Control (OSC) protocol 6.11
    • Fixed: Changed midi channel range for /vkb_midi to 1-16 to be consistent with all other numbering, which start with 1. Furthermore, fixed the documentation which indicated 0-16.
  • Novation Launchpad Pro & MkII 3.44
    • Fixed: Flipped session view triggered the wrong clips
    • Fixed: Temporary modes Rec Arm, Track Select, Mute, Solo and Stop Clip did not return to previous views.
• Fixed: Setting sequencer "loops" was broken.
• Fixed: Push 2: Changing values in Setup mode was buggy.

4.00

• Integrated DrivenByMoss 4.00
  • Mackie MCU - Changes 2.63
    • Fixed: Crash if Marker mode was selected and Assignment display was enabled.
  • Native Instruments Komplete Kontrol 2 S49, S61 * Changes 1.20
    • Fixed: Mute and Solo did not work on Hybrid tracks
  • Maschine Mikro Mk3
    • Initial release

3.31

• New: Clip Loop parameter turns on/off the media items "Loop item source" parameter.
• Fixed: Recording Track Automation did not work.

3.30

• New: Integrated DrivenByMoss 3.30.
• Fixed: Push 2: Clip piano roll: Note texts could not be seen when notes were black.
• Fixed: Scrolling of clips did not work.

3.20

• New: Integrated DrivenByMoss 3.20.
• New: Repeat can be enabled (this uses an Arp in the channel insert). Long press Repeat button to set the speed.
• New: Using 'New' to create a clip does not start recording anymore for easier use with sequencers.
• Fixed: Creating a new clip did not set the selection state correctly.

3.02

• Fixed: Scrolling tracks on Push 1/2 was broken when folders are in the project.

3.01

• Fixed: Tracks without a name did not show up.
• Fixed: New clip did sometimes not work.
• Fixed: Notes in Sequencer were not updated when clip was deselected and selected again.

3.00

• New: Replaced the Reaper EEL backend with a C++ implementation.
• New: Support for clips
• New: Support for scenes
• New: Support for markers
• New: Support for sequencers

2.10

• New: If supported by the Java/OS platform the application is run as a tray icon. Closing the app minimizes it to the tray. Double click the tray icon to show it again. Right click on the tray icon to show the context menu with the options to show the application or to exit it. If Auto-run is enabled, the app is automatically minimized startup.
• New: The console window is no longer shown on startup.
• New: 64 drum pad view for Ableton Push and Novation Launchpad Pro / MkII.
• New: Bank page is now automatically adjusted on controller if changed in Reaper.
• Fixed: Midi In-/Outputs were not correctly restarted when Configuration dialog was closed.
• Fixed: Push 2 preview display window was still drawn when hidden.
• Fixed: Push 2 preview display window produced OutOfMemoryExceptions after a while.

2.03

• Fixed: The Reaper start path was not stored.

2.02

• Fixed: Could not start Reaper when spaces are included in the path.

2.01

• New: Added more logging information for loading Reaper INI files

2.00

• New: Initial release after switching to Java

\pagebreak